GB/T 29312-2022 Active National standards

GB/T 29312-2022 Low-voltage reactive power compensation switching component

GB/T 29312-2022 Low-voltage reactive power compensation switching component

Publish Date: 2022-10-12 Implement Date: 2023-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29312-2022

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Low-voltage distribution electrical equipment

ICS Name: Fuses and other overload protection devices

Publish Date: 2022-10-12

Implement Date: 2023-05-01

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国低压成套开关设备和控制设备标准化技术委员会(SAC/TC 266)

Pages: 23 pages

Scope

本文件规定了低压无功功率补偿投切器（以下简称“投切器”）的分类、使用条件、技术要求、试验方法、检验规则、标识、包装、运输和存放。
本文件适用于额定交流电压不超过1 000V（或1 140 V），频率不超过1 000 Hz的低压无功功率补偿投切器。

Development Information

Drafting Units:

天津电气科学研究院有限公司、机械工业北京电工技术经济研究所、天津天传电控设备检测有限公司、浙江省高低压电器产品质量检验中心、浙江三辰电器股份有限公司、深圳市力量科技有限公司、宁夏力成电气集团有限公司、浙江天正电气股份有限公司、浙宝电气(杭州)集团有限公司、南京华胜电气有限公司、上海南空通讯电器设备有限公司、廊坊英博电气有限公司、盛隆电气集团有限公司、威司克股份有限公司、上海华建开关有限公司、香江科技股份有限公司、上海友邦电气(集团)股份有限公司、镇江加勒智慧电力科技股份有限公司、湖南电器科学研究院有限公司、杭州电力设备制造有限公司萧山欣美成套电气制造分公司、华北油田科达开发有限公司、贵州长通电气有限公司、陕西博古德智能科技有限公司、河北沃邦电力科技有限公司、斯贝兰德工程技术(北京)有限公司、天津大学、帝森克罗德集团有限公司、深圳市赛源电气技术有限公司、胜利油田大源节能设备有限公司、胜利油田凯龙工贸有限责任公司、东营市汇安科工贸有限责任公司、山东鲁能力源电器设备有限公司、上海欧通电气有限公司、恒一电气集团有限公司、高原(山东)机电设备有限公司、东方博沃(北京)科技有限公司、柯贝尔电能质量技术(上海)有限公司、国网天津市电力公司电力科学研究院、北京中电普华信息技术有限公司

Drafting Persons:

付宝鑫、白文波、王连杰、许启进、周伟、林川、徐志、徐会宏、姜晓东、周金龙、高广春、邢勇、谢正新、郑巨式、王叔平、章雪峰、王国良、王林、周建勋、王鹏程、伍怀东、张义、王广帅、马洪亮、王利、何晋伟、陈梁、柳航群、吴兆君、邹清光、周素婷、刘党、项章峰、林佳昊、杨东亮、秦玲、束文萍、贺春、胡文明

Word Count: 44 Thousand words Pages: 23 pages

Replace the following standards

GB/T 29312-2012 Low-voltage reactive power compensation switchgear component

Referenced Standards

GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB/T 7251.8-2020 Low-voltage switchgear and controlgear assemblies—Part 8:General technical requirements for intelligent assembly GB/T 15576-2020 Low-voltage reactive power compensation assemblies GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB/T 5169.10-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire test methods—General GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.10-2017 Fire hazard testing for electric and electronic products—Part 10:Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.11-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire end-product test and guidance GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT) GB/T 5169.12-1999 Fire hazard testing for electric and electronic products—Test methods-Glow-wire flammability test on materials GB/T 5169.12-2006 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability test method for materials GB/T 5169.12-2013 Fire hazard testing for electric and electronic products—Part 12: Glowing/hot-wire based test methods—Glow-wire flammability index(GWFI) test method for materials GB/T 5169.12-2024 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability index (GWFI) test method for materials GB/T 5169.13-1999 Fire hazard testing for electric and electronic products—Test methods-Glow-wire ignitability test on materials GB/T 5169.13-2006 Fire hazard testing for electric and electronic products—Part 13:Glowing/hot-wire based test methods—Glow-wire ignitability test method for materials GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials GB/T 5169.13-2024 Fire hazard testing for electric and electronic products—Part 13:Glowing/hot-wire based test methods—Glowing-wire ignition temperature(GWIT) test method for materials

Related Standards

GB 13539.4-1992 Replaced

GB 13539.4-1992 Low-voltage fuses—Supplementary requirements for fuse-links for the protection of semiconductor devices

Publish Date: 1992-07-01

GB 13955-1992 Replaced

GB 13955-1992 Installation and operation of residual current operated protective devices

Publish Date: 1992-12-19

GB 14285-1993 Replaced

GB 14285-1993 Technical code for relaying protection and security automatic equipment

Publish Date: 1993-04-10

GB 14287-1993 Replaced

GB 14287-1993 Residual current operated alarm devices for fire prevention

Publish Date: 1993-04-10

GB 15166.2-1994 Replaced

GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses

Publish Date: 1994-08-18

GB 15166.3-1994 Replaced

GB 15166.3-1994 Alternating-current high-voltage fuses Expulsion fuse

Publish Date: 1994-08-18