GB/T 25359-2023 Active National standards

GB/T 25359-2023 Petroleum and natural gas industries—Packaged reciprocating gas compressors

GB/T 25359-2023 Petroleum and natural gas industries—Packaged reciprocating gas compressors

Publish Date: 2023-05-23 Implement Date: 2023-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25359-2023

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Compressors and fans

ICS Name: Compressors and pneumatic machinery

Publish Date: 2023-05-23

Implement Date: 2023-12-01

Pages: 79 pages

Scope

This document specifies the requirements for the design, materials, manufacturing, inspection, and preparation for shipment of integrated skid-mounted units, oil-lubricated or oil-free cylinders, and split or integral reciprocating compressors with drive motors used in the oil and gas industry, as well as the purchasing specifications, on-site construction, and minimum requirements for equipment procurement that can be implemented in accordance with these requirements.
This document applies to integrated skid-mounted reciprocating compressors and all necessary auxiliary equipment used in the oil and gas industry.
Note 1: Necessary auxiliary equipment includes: water and gas coolers, mufflers, exhaust emission control equipment, filters, separators, control panels, and pipelines, etc.
Note 2: These equipment are assembled into an operable unit in accordance with the purchasing specifications and the minimum requirements for on-site construction and equipment installation.
This document does not include the following equipment:
——Oil-lubricated or oil-free reciprocating compressors (hereinafter referred to as compressors) used in the oil and gas industry as specified in GB/T 20322;
——Compressors directly installed on foundations;
——Single-acting piston compressors with a crosshead and piston integrated (automobile type);
——Power or instrumentation air compressors with an exhaust pressure not exceeding 0.9 MPa;
——Compressors driven by diesel engines, gas turbines, and steam turbines.

Development Information

Word Count: 154 Thousand words Pages: 79 pages

Replace the following standards

GB/T 25359-2010 Petroleum and natural gas industries—Packaged reciprocating gas compressors

Referenced Standards

GB/T 16895.3-2017 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors GB/T 16895.3-2024 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems GB/T 16895.6-2014 Low-voltage electrical installations—Part 5-52:Selection and erection of electrical equipment—Wiring systems GB/T 16895.33-2017 Low-voltage electrical installations—Part 5-56:Selection and erection of electrical equipment—Safety services GB/T 16895.33-2021 Low-voltage electrical installations—Part 5-56:Selection and erection of electrical equipment—Safety services GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products—Surface preparation methods—Abrasive blast-cleaning GB/T 18839.3-2002 Preparation of steel substrates before application of paints and related products—Surface preparation methods—Hand-and power-tool cleaning GB/T 20666-2006 Unified screw threads—Tolerances GB/T 20669-2006 Unified screw threads—Profiles GB/T 20670-2006 Unified screw threads—General plan GB/T 20801.1-2006 Pressure piping code—Industrial piping—Part 1:General GB/T 20801.1-2020 Pressure piping code—Industrial piping—Part 1:General GB/T 20801.1-2025 Pressure piping code—Part 1:Industrial piping GB/T 20801.2-2006 Pressure piping code—Industrial piping—Part 2:Materials GB/T 20801.2-2020 Pressure piping code—Industrial piping—Part 2:Materials GB/T 20801.3-2006 Pressure piping code—Industrial piping—Part 3:Design and calculation GB/T 20801.3-2020 Pressure piping code—Industrial piping—Part 3:Design and calculation GB/T 20801.4-2006 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly GB/T 20801.4-2020 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly GB/T 20801.5-2006 Pressure piping code—Industrial piping—Part 5:Inspection and testing GB/T 20801.5-2020 Pressure piping code—Industrial piping—Part 5:Inspection and testing GB/T 20801.5-2025 Pressure piping code—Part 5:Hydrogen piping and pipelines GB/T 20801.6-2006 Pressure piping code—Industrial piping—Part 6:Safeguarding GB/T 20801.6-2020 Pressure piping code—Industrial piping—Part 6:Safeguarding GB/T 20972.1-2007 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 1:General principles for selection of cracking resistant materials GB/T 20972.2-2008 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.2-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.3-2008 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys)and other alloys GB/T 20972.3-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys GB/T 21654-2008 GRAFCET specification language for sequential function charts GB/T 21654-2025 GRAFCET specification language for sequential function charts GB/T 28778-2012 Pilot-operated safety valves GB/T 28778-2023 Pilot operated safety valves GB/T 32238-2015 General steel castings suitable for low temperature and high pressure service GB/T 35147-2017 Petroleum and natural gas industries—Flexible couplings for mechanical power transmission—General purpose applications HG/T 20592 HG/T 20615 JB/T 5439-2017 The ultrasonic testing of the spheroidal graphite iron components of a volumetric compressor JB/T 5439-1991 Compressor nodular cast iron components ultrasonic flaw detection JB/T 5440-2017 Volumetric compressor ultrasonic testing of steel components JB/T 5440-1991 Compressor forged steel parts ultrasonic flaw detection JB/T 5441-2017 The ultrasonic testing of steel components in volume-type compressors \nJB/T 5441-1991 Ultrasonic Inspection of Cast Steel Parts for Compressors JB/T 5442-2017 Magnetic particle testing of important components in displacement compressors according to JB/T 5442-2017 JB/T 5442-1991 The magnetic particle inspection of important components in the compressor JB/T 6431-2013 Technical Conditions for Gray Cast Iron Parts Used in Volumetric Compressors JB/T 6431-1992 Technical Specifications for Gray Cast Iron Parts Used in Volumetric Compressors JB/T 6441-2008 JBT 6441-2008 Safety Valve for Compressors JB/T 6441-1992 Safety valves for compressors JB/T 6441-2025 Safety valve for compressor JB/T 6908-2020 Volumetric compressor steel forgings JB/T 6908-2006 Volumetric compressor steel forgings JB/T 6908-1993 Technical Specifications for Forged Parts of Volumetric Compressors JB/T 8466-2014 Forged steel parts are penetrant tested JB/T 8466-1996 Forged steel parts liquid penetrant inspection method JB/T 8935-2014 JBT 8935-2014 Safety requirements for compressors used in process flow JB/T 8935-1999 Safety standard for compressors for process industries JB/T 9104-2013 Technical Specifications for Nodular Cast Iron Parts Used in Volumetric Compressors JB/T 9104-1999 JBT 9104-1999 Rubber-type Compressor with Ductile Iron Parts Technical Specification JB/T 12380-2015 JB/T 12380-2015 Corrosion-resistant Duplex (Austenitic-Ferritic) Stainless Steel Castings for Pressure Components JB/T 13343-2017 JBT 13343-2017 Cast steel parts technical specification for displacement compressors JB/T 13633-2019 Compressor with air cooler NB/T 47004.1-2017 Plate Heat Exchanger Part 1: Removable Plate Heat Exchanger NB/T 47004.1-2025 Panel-type heat exchanger Part 1: Removable-type panel-type heat exchanger NB/T 47004.2-2021 Plate Heat Exchanger Part 2: Welded Plate Heat Exchangers NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing" NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing NB/T 47045-2015 Brazed plate heat exchanger NB/T 47045-2024 NB/T 47045-2024 Brazed plate heat exchanger NB/T 47048-2015 Spiral-plate heat exchanger NB/T 47048-2025 Spiral-plate heat exchanger TSG 21-2016 Supervision Regulation on Safety Technology for Stationary Pressure Vessel ISO 20816-8

Adopt standards

ISO 13631:2002

Related Standards

GB/T 4976-1985 Replaced

GB/T 4976-1985 Compressors—Classification

Publish Date: 1985-03-04

GB/T 5773-1986 Replaced

GB/T 5773-1986 The methods of performance test for positive displacement refrigerant compressors

Publish Date: 1986-01-17

GB/T 13276-1991 Abolished

GB/T 13276-1991 Intake filter silencers for displacement air compressors

Publish Date: 1991-11-06

GB/T 13277-1991 Replaced

GB/T 13277-1991 Compressed air for general use—Quality classes

Publish Date: 1991-11-06

GB/T 13278-1991 abolished_transferred

GB/T 13278-1991 Dry screw air compressor for general use—Specifications

Publish Date: 1991-11-06

GB/T 13280-1991 Abolished

GB/T 13280-1991 Screw compressor for the process industry—Specifications

Publish Date: 1991-11-06