GB/T 29046-2023 Active National standards

GB/T 29046-2023 Detection methods of technical specification for pre-insulated district heating pipes

GB/T 29046-2023 Detection methods of technical specification for pre-insulated district heating pipes

Publish Date: 2023-09-07 Implement Date: 2024-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29046-2023
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Heating and heating engineering
ICS Name: \nCentral heating system
Publish Date: 2023-09-07
Implement Date: 2024-04-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国城镇供热标准化技术委员会(SAC/TC 455)
Pages: 68 pages

Scope

本文件规定了城镇供热预制保温管道外观和结构尺寸、工作管、保温层、外护管(层)、热水保温管、热水保温管道接头、热水保温管件、热水保温管道阀门、保温管道信号线、蒸汽保温管及接头、蒸汽直埋保温管件、蒸汽直埋保温管道外护管防腐涂层的检测方法,以及土壤参数测试、主要检测设备和仪表、数据处理和检测报告。本文件适用于城镇供热预制热水和蒸汽保温管道、管件及接口技术指标的检测与评定。

Development Information

Drafting Units:

北京市公用事业科学研究所、中国城市建设研究院有限公司、北京热力装备制造有限公司、唐山兴邦管道工程设备有限公司、台州龙江化工机械科技有限公司、哈尔滨工业大学、北京市煤气热力工程设计院有限公司、中国市政工程华北设计研究总院有限公司、天华化工机械及自动化研究设计院有限公司、西安双吉节能科技有限公司、天津太合节能科技有限公司、大连益多管道有限公司、河北峰诚管道有限公司、辽宁鸿鑫节能科技有限公司、中投(天津)智能管道股份有限公司、河北益瑞检测科技有限公司、大连开元管道有限公司、江丰管道集团有限公司、山东茂盛管业有限公司、天津中浩供热工程有限公司、河北乾海管道制造有限公司、辽宁江丰保温材料有限公司、天津天地龙管业股份有限公司、新兴铸管股份有限公司、北京市热力工程设计有限责任公司、昊天节能装备有限责任公司、大连科华热力管道有限公司、河北君业科技股份有限公司、万华化学集团股份有限公司、内蒙古伟之杰节能装备有限公司、天津市宇刚保温建材有限公司、烟台市顺达聚氨酯有限责任公司、中国石油工程建设有限公司华北分公司、上海科华热力管道有限公司、北京华能保温工程有限公司、天津大学、三杰节能新材料股份有限公司、青岛鑫汇得防腐保温有限公司、河南锐特热力管道科技有限公司、北京中建建筑科学研究院有限公司、北京市建设工程质量第四检测所有限公司

Drafting Persons:

白冬军、杨雪飞、罗琤、冯文亮、贾丽华、燕勇鹏、王芃、陈涛、邱华伟、蒲旭亮、胡春峰、刘喜怀、张景娜、郭林轩、赵相宾、宣玲国、刘建立、胡涛、翟宝环、张松林、陈俊杰、闫建国、熊从贵、张勇、宁江涛、刘秀清、陈华栋、马宗勇、朱彦飞、张国玉、杨秋、潘存业、冷柏逊、闫明海、闫必行、叶刘亮、赵常英、陈雷、罗文峰、荣波、陈朋、杜立凇、于路坤、张金花、高雪、沈旭、王珣玥

Word Count: 134 Thousand words Pages: 68 pages

Replace the following standards

Referenced Standards

GB/T 14402-1993 Test method of heat of combustion for building materials GB/T 14402-2007 Reaction to fire tests for building materials and products—Determination of the heat of combustion GB/T 14402-2026 Reaction to fire tests for building materials and products—Determination of the heat of combustion GB/T 15560-1995 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids GB/T 16400-1996 Aluminium silicate wool and their products for thermal insulation GB/T 16400-2003 Aluminium silicate wool and it's products for thermal insulation GB/T 16400-2015 Aluminium silicate wool and it's products for thermal insulation GB/T 16400-2023 Aluminosilicate wool and it’s products for thermal insulation GB/T 17146-1997 Test methods for water vapour transmission of building materials GB/T 17146-2015 Test methods for water vapour transmission properties of building materials and products GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings GB/T 17393-1998 Standard specification of thermal insulation materials for use over austenitic stainless steel GB/T 17393-2008 Specification for thermal insulation for use in contact with austenitic stainless steel GB/T 17430-1998 Estimating the maximum use temperature of thermal insulation GB/T 17430-2015 Estimating the maximum service temperature of thermal insulation GB/T 17911-2006 Refractory products—Methods of test for ceramic fibre products GB/T 17911-2018 Methods of test for refractory fibre products GB/T 17911.1-1999 Refractory ceramic fibre products—Preparation of test pieces GB/T 17911.2-1999 Refractory ceramic fibre products—Determination of thickness GB/T 17911.3-1999 Refractory ceramic fibre products—Determination of bulk density GB/T 17911.4-1999 Refractory ceramic fibre products—Determination of permanent linear change on heating GB/T 17911.5-1999 Refractory ceramic fibre products—Determination of tensile strength GB/T 17911.6-1999 Refractory ceramic fibre products—Determination of shot content GB/T 17911.7-2000 Refractory ceramic fibre products—Determination of resilience GB/T 17911.8-2002 Refractory ceramic fibre products—Determination of thermal conductivity GB/T 17794-2021 Preformed flexible elastomeric foam thermal insulation GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds GB/T 18251-2019 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation GB/T 18252-2008 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation GB/T 18252-2020 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation GB/T 18369-2001 Glass fiber roving GB/T 18369-2008 Glass fiber roving GB/T 18369-2022 Glass fiber roving GB/T 18370-2001 Glass fibre woven roving GB/T 18370-2014 Glass fibre woven roving GB/T 18475-2001 Thermoplastics materials for pipes and fittings for pressure applications—Classification and designation—Overall Service(design) coefficient GB/T 19285-2003 Inspection of corrosion protection for buried steel pipelines GB/T 19285-2014 Inspection of corrosion protection for buried steel pipelines GB/T 19285-2026 Inspection of corrosion protection for buried steel pipelines GB/T 20313-2006 Hygrothermal performance of building materials and products—Determination of moisture content by drying at elevated temperature GB/T 23257-2009 Polyethylene coating for buried steel pipeline GB/T 23257-2017 Polyethylene coating for buried steel pipeline GB/T 27418-2017 Guide to the evaluation and expression of uncertainty in measurement GB/T 30806-2014 Thermal insulating products for building applications—Determination of dimensional stability under specified temperature and humidity comditions GB/T 32064-2015 Determination of thermal conductivity and thermal diffusivity of building materials:transient plane heat source method GB/T 32682-2016 Plastics—Determination of environment stress cracking(ESC) of polyethylene—Full-notch creep test(FNCT) GB/T 33061.1-2016 Plastics—Determination of dynamic mechanical properties—Part 1:General principles GB/T 33061.1-2025 Plastics—Determination of dynamic mechanical properties—Part 1:General principles GB/T 34336-2017 Reinforced nanoporous aerogel products for thermal insulation GB/T 35842-2018 Technical requirements for pre-insulated directly buried valve of urban heating GB/T 35842-2026 Technical requirements for pre-insulated directly buriedvalve of urban heating GB/T 37263-2018 Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane(PUR) foamed-plastics and high density polyethylene(PE) casing pipes GB/T 37827-2019 Welded ball valve for urban heating GB/T 37828-2019 Bidirectional metal to metal sealed butterfly valve for urban heating GB/T 40402-2021 Pre-insulated composite plastic pipes with polyethylene casing GB/T 50123-2019 Standard for geotechnical testing method GB 50683-2011 Code for acceptance of field equipmemt,industrial pipe welding construction quality HG/T 20273-2011 Technical code for coating engineering of sparying polyurea protection materials JC/T 618-2019 Chemical analysis methods for solutes such as chloride, fluoride, silicate, and sodium in insulation materials JC/T 618-2005 Chemical analysis methods for solutes containing chloride, fluoride, silicate, and sodium in thermal insulation materials JC/T 647-2014 Fiber-reinforced plastic insulation products JC/T 647-2005 Foam Glass Insulation Product NB/T 47013.1-2015 Non-destructive testing of pressure equipment - Part 1: General requirements NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing SY/T 0315-2013 Steel pipe fusion-bonded epoxy powder coating technical specification SY/T 0315-2005 The technical specifications for a single-layer molten weld epoxy coating applied to steel pipes SY/T 0315-1997 Steel pipe welding epoxy powder coating technology standard SY/T 5037-2023 Underground arc welding steel pipe for general fluid conveyance pipeline SY/T 5037-2018 Underground arc welding steel pipe for general fluid conveyance pipeline SY/T 5037-2012 Submerged arc welded steel pipe for general fluid conveying pipelines SY/T 5037-2000 SY/T 5037-2000 Screw-Gap Soldering Steel Pipe for Low-Pressure Pipeline Transportation System SY 5257-1991 Steel Bending Pipe SY/T 5257-2012 Steel Induction Heating Bending Tubes for Oil and Gas Transportation SY/T 5257-2004 Steel bends for oil and gas transportation

Related Standards

Contact Us