GB/T 3821-1983
Replaced
GB/T 1147.1-2025
Active
National standards
GB/T 1147.1-2025 Small and medium power internal combustion engines—Part 1:General technical specifications
GB/T 1147.1-2025 Small and medium power internal combustion engines—Part 1:General technical specifications
Basic Information
Standard Code:
GB/T 1147.1-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Internal combustion engines and associated equipment
ICS Name:
Internal combustion engine
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国内燃机标准化技术委员会(SAC/TC 177)
Pages:
24 pages
Scope
本文件规定了中小功率内燃机(标定功率不大于560 kW)的技术要求、检验规则、标志、包装、运输和贮存等,描述了相应的试验方法。
本文件适用于道路车辆、船舶、农用拖拉机和林业机械、工程机械、发电机组、排灌机械用中小功率内燃机,其他目前尚无适用文件的中小功率内燃机参照执行。
Development Information
Drafting Units:
上海机动车检测认证技术研究中心有限公司、广西玉柴机器股份有限公司、昆明云内动力股份有限公司、潍柴动力股份有限公司、中国北方发动机研究所、上海新动力汽车科技股份有限公司、哈尔滨东安汽车动力股份有限公司、宁波丰沃增压科技股份有限公司、天津内燃机研究所(天津摩托车技术中心)、常柴股份有限公司、浙江新柴股份有限公司、江苏常发农业装备股份有限公司、无锡华源凯马发动机有限公司、招商局检测车辆技术研究院有限公司、洛阳拖拉机研究所有限公司、浙江富杰德汽车系统股份有限公司、武汉东方骏驰精密制造有限公司、浙江合达铝业有限公司
Drafting Persons:
郭华、谢亚平、董家枝、王艳锋、刘长振、王德成、毕洪宝、邓玉林、李俊东、赵兴天、王永红、丁倩岚、陈楠、覃星念、谢国忠、姚俊、刘建勇、王跃胜、谢太林、岳状、张伟、李玉洁、陈泽忠、李志杰、吴瑞婷、石来华、郑和瑞、赵继东、王俊杰、朱江平、吴伟、张顺、计维斌
Same series standard
Replace the following standards
Referenced Standards
GB/T 10826.1-2025 Fuel injection equipment—Vocabulary—Part 1:Fuel injection pump
GB/T 10826.2-2008 Fuel injection equipment—Vocabulary—Part 2:Fuel injectors
GB/T 10826.3-2008 Fuel injection equipment—Vocabulary—Part 3:Unit injectors
GB/T 10826.4-2008 Fuel injection equipment—Vocabulary—Part 4:High-pressure pipes and end-connections
GB/T 10826.5-2008 Fuel injection equipment—Vocabulary—Part 5:Common rail fuel injection system
GB 11871-1989 Limits of airborne noise emitted by marine diesel engines
GB 11871-2009 Limits of airborne noise emitted by marine diesel engines
GB/T 14097-2023 Reciprocating internal combustion engines—Limit values of emitted noise
GB 14023-2022 Vehicles,boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of off-board receivers
GB 14762-2008
GB 15097-2016 Limits and measurement methods for exhaust pollutants from marine engines (CHINAⅠ、Ⅱ)
GB/T 15370-1994 General specifications for agricultural wheeled and tracking tractors
GB/T 15370-2004 General requirement of agricultural wheeled tractors and crawler tractors
GB/T 15370.1-2012 General requirement of agricultural tractors—Part 1:under 50 kW wheeled tractors
GB/T 15370.2-2009 General requirement of agricultural tractors—Part 2:50 kW~130 kW wheeled tractors
GB/T 15370.2-2025 Agricultural tractors—General requirement—Part 2:50 kW~130 kW wheeled tractors
GB/T 15370.3-2012 General requirement of agricultural tractors—Part 3:Over 130 kW wheeled tractors
GB/T 15370.3-2025 Agricultural tractors—General requirement—Part 3:Over 130 kW wheeled tractors
GB/T 15370.4-2012 General requirement of agricultural tractors—Part 4:Crawler tractors
GB/T 15370.5-2012 General requirement of agricultural tractors—Part 5:Belt-drive wheeled tractors
GB/T 15370.6-2016 Agricultural tractors—General requirements—Part 6:Four-wheel boat tractors
GB/T 15370.7-2017 Agricultural tractors—General requirement—Part 7:Three-wheel boat tractors
GB/T 15371-2023 Reciprocating internal combustion engines—Evaluation method of torsional vibration of crankshaft system
GB 17691-2018 Limits and measurement methods for emissions from diesel fuelled heavy-duty vehicles(China VI)
GB/T 17692-2024 Measurement methods of net power for automotive engines and drive motor
GB/T 18297-2024 Performance test code for road vehicle engines
GB 18655-2002 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
GB/T 18655-2010 Vehicles,boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 18655-2018 Vehicles,boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 18655-2025 Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 19055-2024 Reliability test methods for motor vehicle engines
GB/T 20651.1-2006 Reciprocating internal combustion engines—Safety—Part 1:Compression ignition engines
GB/T 20651.1-2018 Reciprocating internal combustion engines—Safety—Part 1:Compression ignition engines
GB/T 20651.2-2014 Reciprocating internal combustion engines—Safety—Part 2:Spark ignition engines
GB 20891-2014
GB/T 21404-2022 Internal combustion engines—Determination and method for the measurement of engine power—General requirements
GB 26133-2010
GB/T 28239-2012 Limits and measurement methods for non-road diesel engine specific fuel consumption and specific oil consumption
GB/T 28239-2020 Limits and measurement methods for non-road diesel engine specific fuel consumption
GB/T 37170-2018 Technical code for safety of stationary gas engine
GB/T 37692-2019 Running mode specific fuel consumption limits and measurement methods for small spark ignition engines of non-road mobile machinery
GB/T 38750.1-2020 Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines
GB/T 38750.2-2020 Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 2:Gasoline engines
CB/T 3253-2013 Marine diesel engine technical specification
CB/T 3254.1-2013 Marine Diesel Engine Test Stand Evaluation - Part 1: Standard Reference Conditions and Power Fuel Consumption and Oil Consumption Calibration
CB/T 3254.1-1994 Marine diesel engine bench test Standard environmental conditions and power fuel consumption and oil consumption verification
CB/T 3254.2-2013 Marine Diesel Engine bench test - Part 2: Test methods
CB/T 3254.2-1994 Boiler code CB/T 3254.2-1994 Marine diesel engine bench test Test methods
CB/T 3254.3-2013 Marine Diesel Engine Test Rig Evaluation - Part 3: Test Measurements
CB/T 3254.3-1994 Marine Diesel Engine Rack Test Experimental Measurement
CB/T 3256-2013 Marine diesel engine vibration rating
CB 3325-1987 Marine diesel engine shaft system torque vibration grading
CB/T 3325-2013 Marine diesel engine shaft system twist vibration rating
HJ1014-2020 Non-road diesel mobile machinery pollutant emission control technical requirements
JB/T 4198.1-2020 Engineering machinery - Diesel engines - Part 1: Technical specification
JB/T 4198.1-2001 Engineering machinery diesel engine technical specification
JB/T 4198.2-2020 Engineering machinery-diesel engines - Part 2: Performance test method
JB/T 4198.2-1999 Engine performance test method for diesel engines used in construction machinery
JB/T 4198.3-2020 Construction machinery diesel engine - Part 3: Reliability and durability test methods
JB/T 5135.1-2013 General Small Gasoline Engine - Part 1: Technical Conditions
JB/T 5135.1-2001 JBT 5135.1-2001 General small gasoline engine bench performance test method
JB/T 5135.2-2013 General Small Gasoline Engine - Part 2: Test Methods for Rated Performance Tests
JB/T 5135.2-2001 General small gasoline engine reliability, durability test and evaluation method
JB/T 5135.2-2025 General gasoline engine - Part 2: Test methods for benchtop performance
JB/T 5135.3-2013 Universal Small Gasoline Engine - Part 3: Reliability, Durability Testing and Evaluation Methods
JB/T 5135.3-2001 JBT 5135.3-2001 General small gasoline engine technical specification
JB/T 5135.3-2025 General gasoline engine - Part 3: Reliability, durability testing and evaluation methods
JB 5136-1991 Engineering machinery gasoline engine technical specification
JB/T 10629-2006 Gasoline engine general technical specification and test methods
JB/T 11323-2013 Reliability evaluation method for small and medium-power diesel engines
JB/T 11482-2013 Jacket Boat Diesel Engine Technical Specification for JB/T 11482-2013
JB/T 14238-2023 Green Design Product Evaluation Specification for Diesel Engine
QC/T 901-2026 Evaluation method for quality inspection of automotive engine products
Related Standards
GB/T 1147-1987
Replaced
GB/T 1147-1987 Reciprocating internal combustion engines—General technical specifications
GB/T 725-1991
Replaced
GB/T 725-1991 Internal combustion engines—Nomenclature and code of designations
GB/T 1149.3-1992
Replaced
GB/T 1149.3-1992 Internal combustion engines—Piston rings-Scraper rings
GB/T 1149.5-1992
Replaced
GB/T 1149.5-1992 Internal combustion engines—Piston rings-Oil control rings
GB/T 1151-1993
Replaced