CJ/T 295-2015 Active Industry standards-Urban construction

CJ/T 295-2015 Grease-water separator for restaurant wastewater

CJ/T 295-2015 Grease-water separator for restaurant wastewater

Publish Date: 2015-11-23 Implement Date: 2016-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: CJ/T 295-2015

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Outdoor water supply and drainage projects

ICS Name: Drainage system

Publish Date: 2015-11-23

Implement Date: 2016-04-01

Pages: 19 pages

Scope

This standard specifies the terms and definitions, product marking, structural types and parameters, usage environment, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of grease separators for catering wastewater.
This standard applies to the design, manufacture, and inspection of grease separators for catering wastewater with a water treatment capacity of no more than 55 m3/h; a wastewater content of no more than 500 mg/L of animal/vegetable oil and grease; a suspended solids concentration of no more than 600 mg/L; and a water temperature of no less than 5 ℃.

Development Information

Word Count: 35 Thousand words Pages: 19 pages

Replace the following standards

CJ/T 295-2008 Grease-water separator for restaurant wastewater

Referenced Standards

GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) CJ 343-2010 Wastewater quality standards for discharge to municipal sewers GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 3280-1992 Cold rolled stainless steel sheets and plates GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip GB/T 3797-2005 Electrical control assemblies GB/T 3797-2016 Electrical control assemblies GB 4706.1-1998 Safety of household and similar electrical appliances Part 1:General requirements GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB/T 5528-1995 Method for determination of moisture and volatile matter invegetable oil and fat GB/T 5528-2008 Animal and vegetable fats and oils—Determination of moisture and volatile matter content GB/T 9969-2008 General principles for preparation of instructions for use of industrial products GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB 11115-1989 Low density polyethylene resin GB/T 11115-2009 Polyethylene(PE) resin GB/T 11901-1989 Water quality—Determination of suspended substance—Gravimetric method GB/T 12232-1989 General purpose industrial valves—Flanged iron gate valves GB/T 12232-2005 General purpose industrial valves—Flanged iron gate valves GB/T 12238-1989 General purpose industrial valves—Flanged and wafer butterfly valves GB/T 12238-2008 Flanged and wafer resilient seal butterfly valves GB/T 14048.1-2000 Low-voltage switchgear and controlgear—General rules GB 14048.1-2006 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 14048.1-2012 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 14048.1-2023 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 14436-1993 General principles of industrial product guarantee documents GB/T 24674-2009 Waste submersible motor-pumps GB/T 24674-2021 Waste submersible motor-pumps GB/T 24923-2010 Technical specifications of basic version electric valve actuators GB/T 4706.1-2024 Safety of household and similar electrical appliances—Part 1:General requirements GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/T 12232-2025 General purpose industrial valves—Flanged iron gate valves

Related Standards

CJ/T 225-2006 Replaced

CJ/T 225-2006 Metal reinforced Polyethylene (PE) spirally corrugated pipe for underground sewer

Publish Date: 2006-06-26

CJ/T 231-2006 Active

CJ/T 231-2006 Unplasticized polyvinyl chloride(PVC-U)and glass microsphere composite pipes for drainage

Publish Date: 2006-06-26

CJ/T 233-2006 Replaced

CJ/T 233-2006 Plastics inspection chambers for sewerage in building area

Publish Date: 2006-07-25

CJ/T 250-2007 Replaced

CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings

Publish Date: 2007-03-08

CJ/T 270-2007 Replaced

CJ/T 270-2007 Steel reinforced spirally wound Polyethylene(PE) drainage pipe

Publish Date: 2007-12-21

CJ/T 273-2008 Replaced

CJ/T 273-2008 Polypropylene sound insulating pipes and fittings for drainage

Publish Date: 2008-04-02