GB/T 7276-1987
Active
JG/T 8-2016
Active
Industry standards-The construction industry
JG/T 8-2016 Members of steel trusses
JG/T 8-2016 Members of steel trusses
Basic Information
Standard Code:
JG/T 8-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nCoal rock
ICS Name:
\nMetal structure
Publish Date:
2016-06-14
Implement Date:
2016-12-01
Pages:
13 pages
Scope
This standard specifies the terms and definitions, general provisions, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of steel truss components.
This standard applies to plane steel trusses composed of angle steel, T-steel, H-steel, channel steel, and I-beam used in industrial and civil buildings. This standard does not apply to trusses subject to fatigue calculation according to specified requirements.
Development Information
Replace the following standards
Referenced Standards
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 229-1994 Metallic materials—Charpy notch impact test
GB/T 229-2007 Metallic materials—Charpy pendulum impact test method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 232-1999 Metallic materials—Bend test
GB/T 232-2010 Metallic materials—Bend test
GB/T 232-2024 Metallic materials—Bend testing method
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 1228-1991 High strength bolts with large hexagon head for steel structures
GB/T 1228-2006 High strength bolts with large hexagon head for steel structures
GB/T 1229-1991 High strength large hexagon nuts for steel structures
GB/T 1229-2006 High strength large hexagon nuts for steel structures
GB/T 1230-1991 High strength plain washers for steel structures
GB/T 1230-2006 High strength plain washers for steel structures
GB/T 1231-1991 Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures
GB/T 1231-2006 Specifications of high strength bolts with large hexagon head,large hexagon nuts,plain washers for steel structures
GB/T 1231-2024 High strength bolts with large hexagon head assemblies for steel structures
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3632-1995 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 3632-2008 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 5117-1995 Carbon steel covered electrodes
GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118-1995 Low alloy steel covered electrodes
GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
GB/T 5293-1999 Carbon steel electrodes and fluxs for submerged arc welding
GB/T 5293-2018 Solid wire electrodes,tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels
GB/T 5780-2000 Hexagon head bolts—Product grade C
GB/T 5780-2016 Hexagon head bolts—Product grade C
GB/T 5780-2025 Fasteners—Hexagon head bolts—Product grade C
GB/T 8110-1995 Welding wires for gas shielding arc welding of carbon and low alloy steels
GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
GB/T 8110-2020 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels
GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 11345-2013 Non-destructive testing of welds—Ultrasonic testing—Techniques,testing levels,and assessment
GB/T 11345-2023 Non-destructive testing of welds—Ultrasonic testing—Techniques, testing levels and assessment
GB 50205-2001 Code for acceptance of construction quality of steel structures
Related Standards
JG 10-1999
Replaced
JG 10-1999 Bolted joints of space grid structures
JG 11-1999
Replaced
JG 11-1999 Welded joints of space grid structures
JG 12-1999
Abolished
JG 12-1999 Inspection and acceptance standard for steel space grid structures
JG/T 13-1999
Active
JG/T 13-1999 Tubular steel frame scaffolding
JG/T 8-1999
Replaced