GB/T 21832.3-2024 Welded austenitic-ferritic(duplex) stainless steel tubes and pipes—Part 3:Pipes for oil and gas transmission

GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis GB/T 222-2006 Permissible tolerances for chemical composition of steel products GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method GB/T 223.58-1987 Methods for chemical analysis of iron，steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 241-1990 Metal tubes—Hydrostatic pressure testing GB/T 241-2007 Metal materials—Tube—Hydrostatic pressure test GB/T 241-2025 Metallic materials—Tube—Hydrostatic pressure test GB/T 246-1997 Metallic materials—Tube—Flattening test GB/T 246-2007 Metal materials—Tube—Flattening test GB/T 246-2017 Metallic materials—Tube—Flattening test GB/T 2102-1988 Acceptance, packing, marking, and certification of pipe GB/T 2102-2006 Acceptance, packing, marking and quality certification of steel pipe GB/T 2102-2022 Acceptance,packaging,marking and quality certification for steel tubular products GB/T 2650-1989 Method of impact test for welded joint GB/T 2650-2008 Impact test methods on welded joints GB/T 2650-2022 Destructive tests on welds in metallic materials—Impact tests GB/T 2651-1989 Method of tensile test for welded joint GB/T 2651-2008 Tensile test method on welded joints GB/T 2651-2023 Destructive tests on welds in metallic materials—Transverse tensile test GB/T 2653-1989 Methods of bend and compression tests for welded joint GB/T 2653-2008 Bend test methods on welded joints GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 5777-1996 Seamless steel pipe and tubing—Methods for ultrasonic testing GB/T 5777-2008 Seamless steel pipe and tubing methods for ultrasonic testing GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections GB/T 7735-1995 Steel tubes—The inspection method on eddy current test GB/T 7735-2004 Steel tubes-The inspection method on eddy current test GB/T 7735-2016 Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for detection of imperfections GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel GB/T 11170-2008 Stainless steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(Routine method) GB/T 13305-1991 Austenitic stainless steels—Determination of area content of the α-phase—Micrographic method using standard diagrams GB/T 13305-2008 Micrographic method for determining area content of the α-phases in stainless steels GB/T 13305-2024 Method for determining content of the α-phase in stainless steels GB/T 15970.1-1995 Corrosion of metals and alloys—Stress corrosion testing—Part 1:General guidance on testing procedures GB/T 15970.1-2018 Corrosion of metals and alloys—Stress corrosion testing—Part 1:General guidance on testing procedures GB/T 15970.2-2000 Corrosion of metals and alloys—Stress corrosion testing—Part 2:Preparation and use of bent-beam specimens GB/T 15970.3-1995 Corrosion of metals and alloys—Stress corrosion testing—Part 3:Preparation and use of U—bend specimens GB/T 15970.4-2000 Corrosion of metals and alloys—Stress corrosion testing—Part 4:Preparation and use of uniaxially loaded tension specimens GB/T 15970.5-1998 Corrosion of metals and alloy—Stress corrosion testing—Part 5:Preparation and use of C-ring specimens GB/T 15970.6-1998 Corrosion of metals and alloys—Stress corrosion testing—Part 6:Preparation and use of pre-cracked specimens GB/T 15970.6-2007 Corrosion of metals and alloys—Stress corrosion testing—Part 6:Preparation and use of pre-cracked specimens for tests under constant load or constant displacement GB/T 15970.7-2000 Corrosion of metals and alloys—Stress corrosion testing—Part 7:Slow strain rate testing GB/T 15970.7-2017 Corrosion of metals and alloys—Stress corrosion testing—Part 7:Slow strain rate testing GB/T 15970.8-2005 Corrosion of metals and alloys—Stress corrosion test—Part 8:Preparation and use of specimens to evaluate weldments GB/T 15970.9-2007 Corrosion of metals and alloys—Stress corrosion testing—Part 9:Preparation and use of pre-cracked specimens for tests under rising load or rising displacement GB/T 15970.10-2021 Corrosion of metals and alloys—Stress corrosion testing—Part 10:Reverse U-bend method GB/T 15970.11-2022 Corrosion of metals and alloys—Stress corrosion cracking—Part 11:Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking GB/T 17897-1999 Test of pitting corrosion resistance of stainless steels in the ferric chloride solution GB/T 17897-2016 Corrosion of metals and alloys—Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20124-2006 Steel and iron—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas (Routine method) GB/T 21835-2008 Dimensions and masses per unit length of welded steel pipes GB/T 30062-2013 Terminology of steel pipes and tubes GB/T 40385-2021 Non-destructive testing of steel tubes—Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections GB/T 40791-2021 Non-destructive testing of steel tubes—Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections GB/T 42677-2023 Non-destructive testing (NDT) methods of steel tubes—Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections YB/T 4395-2014 Determination of Steel Content of Molybdenum, Nb and W by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) YB/T 4396-2014 Determination of Multi-element Content in Stainless Steel by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES)