GB/T 4229-1984
Replaced
GB/T 13148-1991
Replaced
National standards
GB/T 13148-1991 Specification for welding of stainless steel clad steel plate
GB/T 13148-1991 Specification for welding of stainless steel clad steel plate
Basic Information
Standard Code:
GB/T 13148-1991
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Ship materials and their inspection methods
ICS Name:
Flat steel and semi-finished products
Publish Date:
1991-08-23
Implement Date:
1992-05-01
Publisher:
The National Technical Supervision Bureau
Technical Committee:
National Marine Ship Standardization Technical Committee Ship Material Application Process Sub-Technical Committee
Pages:
12 pages
Development Information
Drafting Units:
Lo Yang Ship Materials Research Institute
Drafting Persons:
Liu Kefei, Wu Jing, Cao Weixiang, and Xu Minglin
Superseded by the following standards
Referenced Standards
GB 150-1998 Steel pressure vessels
GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 983-1995 Stainless steel covered electrodes
GB/T 983-2012 Covered electrodes for manual metal arc welding of stainless and heat-resisting steels
GB 1300
GB/T 2649-1989 Methods of sampling for mechanical properties tests of welded joint
GB/T 2651-1989 Method of tensile test for welded joint
GB/T 2651-2008 Tensile test method on welded joints
GB/T 2651-2023 Destructive tests on welds in metallic materials—Transverse tensile test
GB/T 2653-1989 Methods of bend and compression tests for welded joint
GB/T 2653-2008 Bend test methods on welded joints
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 3323-2005 Radiographic examination of fusion welded joints in metallic materials
GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X-and gamma-ray techniques with film
GB/T 3323.2-2019 Non-destructive testing of welds—Radiographic testing—Part 2:X-and gamma-ray techniques with digital detectors
GB 4191
GB/T 4241-1984 Stainless steel wire rods for welding
GB/T 4241-2006 Stainless steel wire rods for welding
GB/T 4241-2017 Stainless steel wire rods for welding
GB/T 4241-2025 Stainless steel wire rods for welding
GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels
GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels
GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels
GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels
GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels
GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels
GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels
GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid
GB/T 4842-1995 Pure argon
GB/T 4842-2006 Argon
GB/T 4842-2017 Argon
GB/T 5117-1995 Carbon steel covered electrodes
GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118-1995 Low alloy steel covered electrodes
GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
GB/T 5293-1999 Carbon steel electrodes and fluxs for submerged arc welding
GB/T 5293-2018 Solid wire electrodes,tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels
GB/T 6052-1993 Commerial liquid carbon dioxide
GB/T 6052-2011 Industrial liquid carbon dioxide
GB/T 6052-2025 Industrial liquid carbon dioxide
GB/T 6396-1995 Clad plates—Machanical and technological test
GB/T 6396-2008 Clad steel plates—Mechanical and technological test
GB/T 8165-1997 Stainless steel clad plates and strips
GB/T 8165-2008 Stainless steel clad plates,sheets and strips
GB/T 8165-2025 Stainless steel clad plate,sheet and strip
ZB J04 005
JB 1152
JB 3964
JB 3965
Related Standards
GB/T 5212-1985
Active
GB/T 5212-1985 Hot rolled silicon steel sheets for electrical grade
GB/T 5313-1985
Replaced
GB/T 5313-1985 Steel plate with through-thickness characteristics
GB/T 704-1988
Replaced
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 2518-1988
Replaced
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 3274-1988
Replaced