GB/T 42558.6-2026 Active National standards

GB/T 42558.6-2026 Seismic techniques of electrical equipment in converter station on plateau—Part 6:Technical specification for seismic monitoring system

GB/T 42558.6-2026 Seismic techniques of electrical equipment in converter station on plateau—Part 6:Technical specification for seismic monitoring system

Publish Date: 2026-01-28 Implement Date: 2026-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 36.00
Out of stock

Basic Information

Standard Code: GB/T 42558.6-2026
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Power transmission and transformation equipment
ICS Name: Comprehensive Electrical Engineering
Publish Date: 2026-01-28
Implement Date: 2026-05-01
Pages: 16 pages

Scope

This document specifies the system structure for monitoring seismic vibrations and the seismic response of electrical equipment in new, renovated, and expanded converter stations in plateau areas, the layout of monitoring points, the management of monitoring data, and the requirements for system installation, commissioning, and acceptance. It also describes the testing methods for the monitoring system.
This document is applicable to seismic monitoring systems in converter stations with voltage levels of ±400 kV and above, located at altitudes of 1,000 m to 5,000 m, and in areas with seismic fortification intensities of 6 to 9.
Other substations/converter stations may refer to this document for guidance in implementing seismic monitoring systems.

Development Information

Word Count: 19 Thousand words Pages: 16 pages

Same series standard

Referenced Standards

GB/T 14597-1993 Environmental climatic conditions appearing in different higher lands for electrical products GB/T 14597-2010 Environmental climatic conditions appearing in different altitudes for electrical products GB/T 17626.1-1998 Electromagnetic compatibility—Testing and measurement techniques—Overview of immunity tests GB/T 17626.1-2006 Electromagnetic compatibility—Testing and measurement techniques—Overview of immunity tests GB/Z 17626.1-2024 Electromagnetic compatibility—Testing and measurement techniques—Part 1:Overview of immunity tests GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.7-1998 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipment connected thereto GB/T 17626.7-2008 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation,for power supply systems and equipment connected thereto GB/T 17626.7-2017 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation,for power supply systems and equipment connected thereto GB/T 17626.8-1998 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.9-1998 Electromagnetic compatibility Testing and measurement techniques Pulse magnetic field immunity test GB/T 17626.9-2011 Electromagnetic compatibility—Testing and measurement techniques—Pulse magnetic field immunity test GB/T 17626.9-2025 Electromagnetic compatibility—Testing and measurement techniques—Part 9:Impulse magnetic field immunity test GB/T 17626.10-1998 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test GB/T 17626.10-2017 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17626.12-1998 Electromagnetic compatibility—Testing and measurement techniques—Oscillatory waves immunity test GB/T 17626.12-2013 Electromagnetic compatibility—Testing and measurement techniques—Ring wave immunity test GB/T 17626.12-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 12:Ring wave immunity test GB/T 17626.13-2006 Electromagnetic compatibility—Testing and measurement techniques—Harmonics and interharmonics including mains signalling at a.c. power port,low frequency immunity test GB/T 17626.14-2005 Electromagnetic compatibility—Testing and measurement techniques—Voltage fluctuation immunity test GB/T 17626.15-2011 Electromagnetic compatibility—Testing and measurement techniques—Flickermeter—Functional and design specifications GB/T 17626.16-2007 Electromagnetic compatibility—Testing and measurement techniques—Test for immunity to conducted,common mode disturbances in the frequency range 0 Hz to 150 kHz GB/T 17626.17-2005 Electromagnetic Compatibility—Testing and measurement techniques—Ripple on d.c.input power port immunity test GB/T 17626.18-2016 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory wave immunity test GB/T 17626.19-2022 Electromagnetic compatibility—Testing and measurement techniques—Part 19:Test for immunity to conducted,differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports GB/T 17626.20-2014 Electromagnetic compatibility—Testing and measurement techniques—Emission and immunity testing in transverse electromagnetic(TEM) waveguide GB/T 17626.21-2014 Electromagnetic compatibility—Testing and measurement techniques—Reverberation chamber test methods GB/T 17626.22-2017 Electromagnetic compatibility(EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs) GB/T 17626.24-2012 Electromagnetic compatibility—Testing and measurement techniques—Test methods for protective devices for HEMP conducted disturbance GB/T 17626.27-2006 Electromagnetic compatibility—Testing and measurement techniques—Unbalance immunity test GB/T 17626.28-2006 Electromagnetic compatibility—Testing and measurement techniques—Variation of power frequency, immunity test GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests GB/T 17626.30-2012 Electromagnetic compatibility—Testing and measurement techniques—Power quality measurement methods GB/T 17626.30-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 30:Power quality measurement methods GB/T 17626.31-2021 Electromagnetic compatibility—Testing and measurement techniques—Part 31:AC mains ports broadband conducted disturbance immunity test GB/Z 17626.32-2025 Electromagnetic compatibility—Testing and measurement techniques—Part 32:High-altitude electromagnetic pulse(HEMP) simulator compendium GB/Z 17626.33-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 33:Measurement methods for high-power transient parameters GB/T 17626.34-2012 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase GB/Z 17626.35-2025 Electromagnetic compatibility—Testing and measurement techniques—Part 35:HPEM simulator compendium GB/T 17626.36-2024 Electromagnetic compatibility—Testing and measurement techniques—Part 36:Intentional electromagnetic interference immunity test methods for equipment and systems GB/T 17626.39-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 39:Radiated fields in close proximity immunity test GB/Z 17626.40-2025 Electromagnetic compatibility—Testing and measurement techniques—Part 40:Digital methods for the measurement of power quantities of modulated or distorted signals GB/T 17742-1999 The Chinese seismic intensity scale GB/T 17742-2008 The Chinese seismic intensity scale GB/T 17742-2020 The Chinese seismic intensity scale GB/T 20626.1-2006 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements GB/T 20626.1-2017 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements GB/T 20626.2-2006 Specific environmental condition—Electrical and electronic products for plateau—Part 2:Selective types and testing specification GB/T 20626.2-2018 Specific environmental condition—Electrical and electronic products for plateau—Part 2:Selective types and testing specification GB/T 20626.3-2006 Specific environmental condition—Electric and electronic products for plateau—Part 3:Protection requirement of lightning, pollution, condensation GB/T 20626.3-2022 Specific environmental condition—Electric and electronic products for plateau—Part 3:Protection requirement of lighting,pollution,condensation GB/T 36344-2018 Information technology—Evaluation indicators for data quality GB/T 42558.1-2023 Seismic techniques of electrical equipment in converter station on plateau—part 1:Directives for seismic test and evaluation GB/T 42558.2-2024 Seismic techniques of electrical equipment in converter station on plateau—Part 2:Specification for seismic design GB/T 42558.3-2024 Seismic techniques of electrical equipment in converter station on plateau—Part 3:Specification for design of energy dissipation and isolation GB 50343-2012 Technical code for protection of building electronic information system against lightning DB/T 10-2016 digital accelerometer for seismic motion measurement DB/T 10-2001 digital seismic accelerometer DB/T 17-2018 Specification for the construction of seismic station—Strong motion station DL/T 1087-2008 The requirements for the immunity of secondary equipment to interference in ±800kV ultra-high voltage DC converter station DL/T 1498.1-2016 "Online Monitoring Device Specification for Substation Equipment - Part 1: General Principles"

Related Standards

Contact Us