GB/T 3317-1982
Replaced
GB/T 32589-2025
Active
National standards
GB/T 32589-2025 Railway applications—Conductor rail current collector
GB/T 32589-2025 Railway applications—Conductor rail current collector
Price:
$ 50.00
Basic Information
Standard Code:
GB/T 32589-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Traction electrical equipment
ICS Name:
Electric traction equipment
Publish Date:
2025-12-31
Implement Date:
2026-07-01
Pages:
24 pages
Scope
This document specifies the operating conditions, technical requirements, inspection rules, reliability, availability, maintainability, and safety (RAMS) requirements for the pantographs of rail transit systems, as well as marking, packaging, transportation, and storage. It also describes the corresponding test methods.
This document is applicable to pantographs used for top-side current collection, bottom-side current collection, or side-side current collection. The requirements for return current collectors shall be implemented accordingly.
Development Information
Replace the following standards
Referenced Standards
GB/T 1239.1-2009 Cold coiled helical springs technical specifications—Part 1:Extension spring
GB/T 1239.3-2009 Cold coiled helical springs technical specifications—Part 3:Torsion spring
GB/T 1402-2025 Railway applications—Supply voltages of traction systems
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB 2894-2025 Safety colours and safety signs
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 7928-2003 General technical specification for metro vehicles
GB/T 7928-2025 General technical specification for metro vehicles
GB 18269-2000 Insulating hand tools for live working up to 1000V a.c and 1500V d.c
GB/T 18269-2008 Live working-Hand tools for use up to 1 kV a.c.and 1.5 kV d.c.
GB/T 18269-2024 Hand tools for live working with 1 kV AC,1.5 kV DC and below
GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules
GB/T 21413.2-2008 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules
GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules
GB/T 21413.5-2023 Railway applications—Electric equipment for rolling stock—Part 5:Electrotechnical components—Rules for HV fuses
GB/T 21414-2008 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21414-2021 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21562-2008 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS)
GB/T 21562.2-2015 Railway applications—Specification and demonstration ofreliability,availability,maintainability and safety(RAMS)—Part 2:Guide to the application for safety
GB/T 21562.3-2015 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety (RAMS)—Part 3:Guide to the application for rolling stock RAM
GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests
GB/T 32347.1-2015 Railway applications—Environmental conditions for equipment—Part 1:Equipment on board rolling stock
GB/T 32350.1-2025 Railway applications—Insulation coordination—Part 1:Basic requirements—Clearances and creepage distances for all electrical and electronic equipment
GB 50157-2013 Code for design of metro
JB/T 5923-2013 Pneumatic cylinder technical specification
JB/T 5923-1997 Pneumatic cylinder technical specification
TB/T 1484.1-2017 Motor vehicle cables - Part 1: Power and control cables
TB/T 1484.1-2025 Motor vehicle cables - Part 1: Power and control cables
TB/T 2843-2015 General Technical Requirements for Rubber Elastic Elements for Railway Vehicles
TB 10624
Related Standards
GB/T 3318-1982
Replaced
GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction
GB/T 6927-1986
Abolished
GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems
GB 1402-1998
Replaced
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 3319-1998
Replaced
GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units
GB 5914.1-2000
Replaced