T/SHPTA 044-2023
Active
Group standards
T/SHPTA 044-2023 Environmental-friendly modified medium-density polyethylene sheath material for optical cables
T/SHPTA 044-2023 Environmental-friendly modified medium-density polyethylene sheath material for optical cables
Price:
$ 26.00
Basic Information
Standard Code:
T/SHPTA 044-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
2023-07-19
Implement Date:
2023-08-19
Pages:
16 pages
Scope
This document specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage for environmentally modified medium-density polyethylene sheathing materials for optical cables with a maximum operating temperature of 70°C.
This document is applicable to environmentally modified medium-density polyethylene sheathing materials for optical cables, as well as medium-density polyethylene cable materials made from polyethylene resin as the main raw material, supplemented with additives such as carbon black, colorants, and antioxidants, and produced through mixing, plasticizing, and granulating processes.
Development Information
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets
GB/T 1408.1-2016 Insulating materials—Test methods for electric strength—Part 1:Test at power frequencies
GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation fator of electrical insulating materials at power,audio and radio frequencies including meter wavelengths
GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST)
GB/T 2411-2008 Plastics and ebonite—Determination of indentation hardness by means of a durometer(shore hardness)
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables—Part 12:Methods for general application—Thermal ageing methods
GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables—Part 41:Methods specific to polyethylene and polypropylene compounds—Resistance to environmental stress cracking—Measurement of the melt flow index—Carbon black and/or mineral filler content measurement in polyethylene by direct combustion—Measurement of carbon black content by thermo gravimetric analysis(TGA)—Assessment of carbon black dispersion in polyethylene using a microscope
GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables—Part 42:Methods specific to polyethylene and polypropylene compounds—Tensile strength and elongation at break after conditioning at elevated temperature—Wrapping test after conditioning at elevated temperature—Wrapping test after thermal ageing in air—Measurement of mass increase—Long-term stability test—Test method for copper-catalyzed oxidative degradation
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 5470-2008 Plastics—Determination of the brittleness temperature by impact
GB/T 6283-2008 Chemical products—Determination of water Karl·fischer method(general method)
GB/T 9352-2008 Plastic—Compression moulding of test specimens of thermoplastic materials
GB/T 18251-2019 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2:Resistive properties(DC methods)—Volume resistance and volume resistivity
GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz~10 MHz)
GB/T 39560.1-2020 Determination of certain substances in electrical and electronic products—Part 1:Introduction and overview
GB/T 39560.2-2020 Determination of certain substances in electrical and electronic products—Part 2:Disassembly,disjointment and mechanical sample preparation
GB/T 39560.2-2024 Determination of certain substances in electrical and electronic products—Part 2:Disassembly,disjointment and mechanical sample preparation
GB/T 39560.4-2021 Determination of certain substances in electrical and electronic products—Part 4:Mercury in polymers,metals and electronics by CV-AAS,CV-AFS,ICP-OES and ICP-MS
GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5:Cadmium,lead and chromium in polymers and electronics and cadmium and lead in metals by AAS,AFS,ICP-OES and ICP-MS
GB/T 39560.6-2020 Determination of certain substances in electrical and electronic products—Part 6:Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.8-2021 Determination of certain substances in electrical and electronic products—Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS)
GB/T 39560.9-2024 Determination of certain substances in electrical and electronic products—Part 9:Hexabromocyclododecane in polymers by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.10-2024 Determination of certain substances in electrical and electronic products—Part 10:Polycyclic aromatic hydrocarbons(PAHs) in polymers and electronics by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.12-2024 Determination of certain substances in electrotechnical products—Part 12:Simultaneous determination of polybrominated biphenyls,polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry
GB/T 39560.301-2020 Determination of certain substances in electrical and electronic products—Part 3-1:Screening lead,mercury,cadmium,total chromium and total bromine by X-ray fluorescence spectrometry
GB/T 39560.302-2024 Determination of certain substances in electrical and electronic products—Part 3-2:Screening fluorine,chlorine and bromine in polymer and electronics by combustion-ion chromatography(C-IC)
GB/T 39560.303-2024 Determination of certain substances in electrical and electronic products—Part 3-3:Screening polybrominated biphenyls,polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory(Py/TD-GC-MS)
GB/T 39560.701-2020 Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium[Cr(VI)]in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
GB/T 39560.702-2021 Determination of certain substances in electrical and electroinic products—Part 7-2:Hexavalent chrome—Determination of hexavalent chrome[Cr(Ⅵ)]in polymers and electronics by the colormetric method
UL 1581-2021
欧盟 1907/2006号(EC)法规(2006年12月18日)
Related Standards
GB/T 4011-1983
Replaced
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced