GB/T 7276-1987
Active
JG/T 300-2011
Active
Industry standards-The construction industry
JG/T 300-2011 Casting steel tubes for building structures
JG/T 300-2011 Casting steel tubes for building structures
Basic Information
Standard Code:
JG/T 300-2011
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nMetal structure engineering
ICS Name:
\nMetal structure
Publish Date:
2011-05-09
Implement Date:
2011-10-01
Pages:
12 pages
Scope
1.1 This standard specifies the method of designating the grades of cast steel pipes manufactured by centrifugal casting process for building structures, technical requirements, manufacturing process and delivery condition, test methods, inspection rules and marking, packaging, and quality certificates, etc.
1.2 This standard applies to cast steel pipes produced by centrifugal casting process (hereinafter referred to as cast steel pipes), which are mainly used in building steel structures, tower and mast structures, and bridge structures, etc.
Development Information
Referenced Standards
GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.41-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
GB/T 223.42-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-brom opyrogallol red photometric method for the determination of tantalum content
GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.45-1994 Methods for chemical analysis of iron, steel and alloy—The cupral separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
GB/T 223.46-1989 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of magnesium content
GB/T 223.47-1994 Methods for chemical analysis of iron, steel and alloy—The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
GB/T 223.48-1985 Methods for chemical analysis of iron, steel and alloy—The semixylenol orange photometric method for the determination of bismuth content
GB/T 223.49-1994 Methods for chemical analysis of iron, steel and alloy—Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
GB/T 223.50-1994 Methods for chemical analysis of iron, steel and alloy—The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.51-1987 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
GB/T 223.52-1987 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
GB/T 223.53-1987 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.54-1987 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrophotometric method for the determination of nickel content
GB/T 223.54-2022 Iron,steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
GB 223.57-1989 The method of chemical analysis for steel and alloys: Extraction separation-adsorption catalytic polarography for the determination of cadmium
GB/T 223.58-1987 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method
GB/T 223.61-1988 Methods for chemical analysis of iron,steel and alloy—The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content
GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method
GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.65-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method for the determination of cobalt content
GB/T 223.65-2012 Steel,iron and alloy—Determination of cobalt content—Flame atomic absorption spectrometric method
GB/T 223.66-1989 Methods for chemical analysis of iron, steel and alloy—The thiocyanate chlorpromazine hydrochloride—chloro form extraction photometric method for the determination of tungsten content
GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.68-1997 Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69-1997 Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 223.70-1989 Methods for chemical analysis of iron, steel and alloy—The o-phenanthroline spectrophotometric method for the determination of iron content
GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method
GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.73-1991 Methods for chemical analysis of iron, steel and alloy—The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method
GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature
GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium
GB/T 229-1994 Metallic materials—Charpy notch impact test
GB/T 229-2007 Metallic materials—Charpy pendulum impact test method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 2102-1988 Acceptance, packing, marking, and certification of pipe
GB/T 2102-2006 Acceptance, packing, marking and quality certification of steel pipe
GB/T 2102-2022 Acceptance,packaging,marking and quality certification for steel tubular products
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method)
GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 6060.1-1997 Roughness comparison specimens—Cast surfaces
GB/T 7233.1-2009 Steel castings—Ultrasonic examination—Part 1:Steel castings for general purposes
GB/T 7233.1-2023 Steel castings—Ultrasonic testing—Part 1:Steel castings for general purposes
GB/T 9444-1988 The methods for magnetic particle testing and for specifying quality levels of steel castings
GB/T 9444-2007 Magnetic particle testing for steel castings
GB/T 9444-2019 Steel and iron castings—Magnetic particle inspection
GB/T 17395-1998 Dimensions、shapes、masses and tolerances of seamless steel tubes
GB/T 17395-2008 Dimensions,shapes,masses and tolerances of seamless steel tubes
GB/T 17395-2024 Dimensions,shapes,masses and tolerances of steel tubes
Related Standards
JG 10-1999
Replaced
JG 10-1999 Bolted joints of space grid structures
JG 11-1999
Replaced
JG 11-1999 Welded joints of space grid structures
JG 12-1999
Abolished
JG 12-1999 Inspection and acceptance standard for steel space grid structures
JG/T 13-1999
Active
JG/T 13-1999 Tubular steel frame scaffolding
JG/T 8-1999
Replaced