GB/T 12712-1991
Replaced
GB/T 38536-2020
Active
National standards
GB/T 38536-2020 Technical specification for the equipment of hot water heating substation
GB/T 38536-2020 Technical specification for the equipment of hot water heating substation
Basic Information
Standard Code:
GB/T 38536-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating and heating engineering
ICS Name:
\nCentral heating system
Publish Date:
2020-03-06
Implement Date:
2021-02-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国城镇供热标准化技术委员会(SAC/TC 455)
Pages:
16 pages
Scope
本标准规定了供热介质为水,设计压力小于或等于2.5 MPa,设计温度小于或等于200 ℃的热力站中有关设备及附件的术语、定义及技术要求。
本标准适用于城镇供热热水热力站设备,包括热交换器、水泵、阀门、除污器、水处理设备、定压设备、管材与管件、防腐与保温、监控系统、低压配电柜及换热机组。
Development Information
Drafting Units:
北京市煤气热力工程设计院有限公司、中国城市建设研究院有限公司、中国市政工程华北设计研究总院有限公司、北京市热力集团有限责任公司、兰州兰石换热设备有限责任公司、上海连成(集团)有限公司、北京市京海换热设备制造有限责任公司、河北海德换热设备有限公司、格兰富(中国)投资有限公司、昊天节能装备有限责任公司
Drafting Persons:
贾震、冯继蓓、杨健、刘芃、刘洪俊、李萍、欧兰军、陈光安、付猛、邹宝岗、周鹏、董强林、王志同、田晓旭、郑中胜
Referenced Standards
GB/T 12243-2021 Spring loaded safety valves
GB/T 12459-1990 Steel butt-welding seamless pipe fittings
GB/T 12459-2005 Steel butt-welding seamless pipe fittings
GB/T 12459-2017 Steel buttwelding pipe fittings—Types and parameter
GB/T 12459-2025 Steel buttwelding piping fittings—Types and parameters
GB/T 12771-2000 Welded stainless steel pipes for liquid delivery
GB/T 12771-2008 Welded stainless steel pipes for liquid delivery
GB/T 12771-2019 Welded stainless steel pipes for fluid transport
GB/T 13006-1991 NPSH for centrifugal, mixed flow and axial pumps
GB/T 13006-2013 NPSH for centrifugal,mixed flow and axial flow pumps
GB/T 13401-1992 Steel plate butt-welding pipe fittings
GB/T 13401-2005 Steel plate butt-welding pipe fittings
GB/T 13401-2017 Steel buttwelding pipe fittings—Technical specification
GB/T 13401-2025 Steel buttwelding piping fittings—Technical specification
GB/T 14382-1993 Tee strainers for fluids for pipes
GB/T 14382-2008 Tee strainers for fluids for pipes
GB/T 15969.1-1995 Programmable controllers—Part 1:General information
GB/T 15969.1-2007 Programmable controllers—Part 1:General information
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 17614.1-1998 Transmitters for use in industrial-process control systems Part 1:Methods of evaluating the performance
GB/T 17614.1-2008 Transmitters for use in industrial-process control systems—Part 1:Methods of evaluating the performance
GB/T 17614.1-2015 Transmitters for use in industrial-process control systems—Part 1:Methods for performance evaluation
GB/T 18033-2000 Seamless copper tubes for water and gas
GB/T 18033-2007 Seamless copper tubes for water and gas
GB/T 18033-2017 Seamless copper tubes for water and gas
GB/T 18300-2001 Specification for automatic sodium ion exchange
GB/T 18300-2011 Specification for automatic control sodium ion exchange
GB/T 18300-2025 Automatically controlled sodium ion exchangers technical specifications
GB/T 18362-2001 Direct-fired lithium bromide absorption water chiller (heater)
GB/T 18362-2008 Direct-fired lithium bromide absorption water chiller(heater)
GB/T 18431-2001 Steam and hot water type lithium bromide absorption water chiller
GB/T 18431-2014 Steam and hot water type lithium bromide absorption water chiller
GB/T 19228.1-2003 Stainless steel press-fittings
GB/T 19228.1-2011 Stainless steel press-fitting assemblies—Part 1:Press-fittings
GB/T 19228.1-2024 Stainless steel press-fitting assemblies—Part1:Press-fittings
GB/T 19228.2-2003 Light gauge stainless steel pipes for stainless steel press-fittings
GB/T 19228.2-2011 Stainless steel press-fitting assemblies—Part 2:Light gauge stainless steel tubes for press-fittings
GB/T 19228.3-2003 O-rings for stainless steel press-fittings
GB/T 19228.3-2012 Stainless steel press-fitting assemblies—Part 3:Rubber O-rings
GB/T 21359-2008 Stainless steel tube threaded couplings for the food and water industry
GB/T 21472-2008 Stainless steel bends and tees for the food industry
GB/T 26155.1-2010 Intelligent electrical actuators for industrial process measurement and control systems—Part 1:General specification
GB/T 26962-2011 Specifications for high-frequency electromagnetic field comprehensive water treatment device
GB/T 28185-2011 Urban heating unit with heat exchanger
GB/T 28185-2025 Heat exchange unit for urban heating
GB/T 28897-2012 Steel pipes of complex plastic
GB/T 28897-2021 Steel-plastic compound pipes and fittings for fluid service
GB/T 29771.1-2013 Numerical controller of industrial machines—Part 1:General requirements
GB/T 30844.1-2014 Variable-frequency drive of 1 kV and below—Part 1:Technical conditions
GB/T 30844.1-2024 Variable-frequency drive of 1 kV and below—Part 1:Technical conditions
GB/T 32224-2015 Heat meters
GB/T 32224-2020 Heat meters
GB 50264-2013 Code for design of industrial equipment and pipeline insulation engineering
CJ/T 25-1999 Hand flow adjusting valves for heating
CJ/T 25-2018 Hand flow adjusting valves for heating
CJ/T 179-2003 Self-operated flow control valve
CJ/T 179-2018 Self-operated flow control valve
CJ/T 253-2007 Fittings of plastic-steel-plastic composite pressure pipe
CJ/T 467-2014 Semi-instantaneous water heater
CJJ/T 241-2016 Technical specification for monitoring and controlling system of urban heating
HG/T 3133-2006 Electronic water treatment equipment technical specification
HG/T 3133-1998 Electronic water treatment equipment technical specification
JB/T 7387-2014 Electric control valve for industrial process control system
JB/T 7387-1994 Electric control valve for industrial process control system
JB/T 8937-2010 Check valve with snap-action design
JB/T 8937-1999 Check valve with clamp mount
JB/T 9248-2015 JBT 9248-2015 Electromagnetic Flowmeter
JB/T 9248-1999 Electromagnetic flowmeter
JB/T 9249-2015 vortex flowmeter
JB/T 9249-1999 Vortex Flow Sensor
JB/T 11049-2010 Self-acting pressure regulating valve
JC/T 658.1-2007 Glass fiber reinforced plastic water tank - Part 1: SMC composite water tank
JC 658.1-1997 Glass Fiber Reinforced Plastic Water Tank - Part 1: SMC Composite Water Tank
JG/T 383-2012 Self-operating differential pressure control valve
JJG 1030-2007 Ultrasonic Flowmeters
NB/T 47004.1-2017 Plate Heat Exchanger Part 1: Removable Plate Heat Exchanger
NB/T 47004.1-2025 Panel-type heat exchanger Part 1: Removable-type panel-type heat exchanger
Related Standards
GB 4706.71-2003
Replaced
GB 4706.71-2003 Safety of household and similar electrical appliances—Particular requirements for stationary circulation pumps for heating and service installations
GB/T 13754-2008
Replaced
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB 4706.71-2008
Active
GB 4706.71-2008 Household and similar electrical appliances—Safety—Particular requirements for stationary circulation pumps for heating and service water installations
JG/T 362-2012
Active
JG/T 362-2012 Heat-allocation device based on temperature determination
GB/T 29039-2012
Active