GB 6932-2001
Replaced
CJ/T 476-2015
Active
Industry standards-Urban construction
CJ/T 476-2015 Specification of seismic supports for mechanical and electrical components
CJ/T 476-2015 Specification of seismic supports for mechanical and electrical components
Basic Information
Standard Code:
CJ/T 476-2015
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Building water supply and drainage projects
ICS Name:
The facilities in the building
Publish Date:
2015-03-04
Implement Date:
2015-09-01
Pages:
11 pages
Scope
This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of seismic support and suspension brackets for building electromechanical equipment.
This standard applies to seismic support facilities for building electromechanical equipment, where the main load is earthquake force and the building's seismic fortification intensity is 6 degrees to 9 degrees.
Development Information
Referenced Standards
GB/T 95-2002 Plain washers—Product grade C
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3091-2001 Welded steel pipe for low pressure liquid delivery
GB/T 3091-2008 Welded steel pipes for low pressure liquid delivery
GB/T 3091-2015 Welded steel pipes for low pressure liquid delivery
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread
GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts
GB/T 3098.6-2000 Mechanical properties of fasteners—Bolts, screws and studs made of stainless-steel
GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs
GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts,screws and studs
GB/T 3098.15-2000 Mechanical properties of fasteners—Nuts made of stainless-steel
GB/T 3098.15-2014 Mechanical properties of fasteners—Stainless steel nuts
GB/T 3098.15-2023 Mechanical properties of fasteners—Stainless steel nuts
GB/T 6723-1986 Cold forming sectional steel—Open sectional steel for general structure—Demension, form, weight and permissible deviations
GB/T 6723-2008 Cold forming sectional steel—Open sectional steel for general structure—Dimensions,shape,weight and permissible tolerances
GB/T 6723-2017 Cold forming open section steel for general structure
GB/T 9944-2002 Stainless steel wire ropes
GB/T 9944-2015 Stainless steel wire ropes
GB/T 24195-2009 Corrosion of metals and alloys—Accelerated cyclic tests with exposure to acidified salt spray,"dry"and "wet" conditions
JG/T 160-2004 Expansion and undercut building anchors for use in concrete
JG/T 160-2017 Mechanical anchors for use in concrete
GB/T 93-1987 Single coil spring lock washers--Normal type
GB/T 95-1985 Plain washers--Product grade C
GB/T 3091-2025 Welded steel pipes for low pressure fluid delivery
GB/T 9944-2025 Stainless-steel wire ropes
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 15389-2025 Fasteners—Threaded rods
GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts
GB/T 93-2025 Fasteners—Single coil spring lock washers—Normal type
Related Standards
GB/T 19249-2003
Replaced
GB/T 19249-2003 Reverse osmosis water treatment equipment
GB/T 19913-2005
Replaced
GB/T 19913-2005 Cast iron heating radiator
CJ/T 245-2007
Abolished
CJ/T 245-2007 Syphonic roof outlet
CJ/T 133-2007
Replaced
CJ/T 133-2007 Integrated circuit card water meter
CJ/T 241-2007
Active