GB/T 5140-1985
Replaced
GB/T 26950.2-2025
Active
National standards
GB/T 26950.2-2025 Explosion-proof industrial trucks—Part 2:Internal combustion industrial truck
GB/T 26950.2-2025 Explosion-proof industrial trucks—Part 2:Internal combustion industrial truck
Price:
$ 75
Basic Information
Standard Code:
GB/T 26950.2-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Storage equipment and loading and unloading machinery
ICS Name:
Industrial vehicles
Publish Date:
2025-12-31
Implement Date:
2026-07-01
Pages:
24 pages
Scope
This document specifies the technical requirements, test methods, inspection rules, and markings, accompanying documents, transportation, and storage for explosion-proof internal combustion industrial vehicles.
This document applies to internal combustion industrial vehicles used in explosive environments of Zones 1, 2, 21, and 22.
This document does not apply to internal combustion industrial vehicles used in gas explosive environments and ammunition dust environments.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 10715-2002 Belt drives—V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts—Electrical conductivity of antistatic belts:Characteristics and methods of test
GB/T 10715-2021 Belt drives—V-ribbed belts,joined V-belts and V-belts including wide section belts and hexagonal belts—Electrical conductivity of antistatic belts:Characteristics and methods of test
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB 20800.1-2006 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 1:Group Ⅱ engines for use in flammable gas and vapor atmospheres
GB 20800.2-2006 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 2:Group Ⅱ engines for use in flammable dust atmospheres
GB 20936.1-2007 Electrical apparatus for the detection and measurement of flammable gases—Part 1:General requirement and test methods
GB/T 20936.1-2017 Gas detectors for explosive atmospheres—Part 1:Performance requirements of detectors for flammable gases
GB/T 20936.1-2022 Gas detectors for explosive atmospheres—Part 1:Performance requirements of detectors for flammable gases
GB 20936.2-2009 Electrical apparatus for the detection and measurement of flammable gases—Part 2:Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
GB/T 20936.2-2017 Gas detectors for explosive atmospheres—Part 2:Selection,installation,use and maintenance of detectors for flammable gases and oxygen
GB/T 20936.2-2024 Gas detectors for explosive atmospheres—Part 2:Selection,installation,use and maintenance of detectors for flammable gases and oxygen
GB/T 26950.1-2025 Explosion-proof industrial trucks—Part 1:Battery industrial truck
JB/T 2391-2017 500 kg~10 000 kg operator-controlled, over-the-cab, heavy-duty forklift truck
JB/T 2391-2007 500kg~10000kg counterbalanced forklift truck technical specification
JB/T 3300-2010 Balanced-weight forklift test method for complete machine
JB/T 3300-1992 Balance-weighted forklift test method for the entire machine
JB/T 3300-2024 Balance-weighted forklift test method for the entire machine
JB/T 9012-2011 Side-loading forklift truck
JB/T 9012-1999 Side-loading forklift truck
JB/T 10750-2018 tractor truck
JB/T 10750-2007 Internal combustion tractor
JB/T 11037-2010 10000kg~45000kg Internal combustion counterbalanced fork lift trucks-Technical specifications
JB/T 11037-2025 10,000kg to 65,000kg operator-controlled, self-propelled, heavy-duty forklift truck
Related Standards
GB/T 5141-1985
Replaced
GB/T 5141-1985 Counter balanced lift trucks—Stability—Basic tests
GB/T 5142-1985
Replaced
GB/T 5142-1985 Reach and straddle fork lift trucks—Stability tests
GB/T 5183-1985
Replaced
GB/T 5183-1985 Fork lift trucks—Fork arms—Dimensions
GB/T 6104-1985
Replaced
GB/T 6104-1985 Powered industrial trucks—Terminology
GB/T 14687-1993
Replaced