GB/T 26475-2011 Bridge type grab ship unloader

GB/T 26475-2021 Bridge type grab ship unloader

GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting GB/T 9286-1998 Paints and varnishes—Cross cut test for films GB/T 9286-2021 Paints and varnishes—Cross-cut test GB/T 9330.1-2008 Plastic insulated control cables—Part 1:General requirements GB 9330.1-1988 Plastic insulated control cables--General GB/T 9330.2-2008 Plastic insulated control cables—Part 2:Polyvinyl chloride insulated and sheathed control cables GB 9330.2-1988 Plastic insulated controlcables--Polyvinyl chloride insulated and sheathed control cables GB/T 9331-2008 Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV GB/T 10095.1-2001 Cylindrical gears—system of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth GB/T 10095.1-2008 Cylindrical gears—System of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth GB/T 10095.1-2022 Cylindrical gears—ISO system of flank tolerance classification—Part 1:Definitions and allowable values of deviations relevant to flanks of gear teeth GB/T 10095.2-2001 Cylindrical gears-system of accuracy—Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information GB/T 10095.2-2008 Cylindrical gears—System of accuracy—Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information GB/T 10095.2-2023 Cylindrical gears—ISO system of flank tolerance classification—Part 2:Definitions and allowable values of double flank radial composite deviations GB/T 10183.1-2010 Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:Genera GB/T 10183.1-2018 Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:General GB/T 10236-2006 Guide for compatibility and protection of interference effects between semiconductor convertors and power supply system GB/T 10595-2009 Belt conveyors GB/T 10595-2017 Belt conveyors GB/T 10595-1989 General specifications for belt conveyers GB 12602-1990 Lifting appliances—Safety devices against overloading—Safety technology code GB/T 12602-2009 Lifting appliances-safety devices against overloading GB/T 12602-2020 Safety devices against over loading for lifting appliances GB/T 13306-1991 Plates GB/T 13306-2011 Plates GB/T 13384-1992 General specifications for packagings of mechanical and electrical products GB/T 13384-2008 General specifications for packing of mechanical and electrical product GB 13955-1992 Installation and operation of residual current operated protective devices GB/T 13955-2005 Installation and operation of residual current operated protective devices GB/T 13955-2017 Installation and operation of residual current operated protective devices GB 14048.1-2006 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 14406-2011 Gantry crane for general purpose GB 15052-1994 Lifting appliances—Dangerous positions and signs GB/T 15052-2010 Cranes—Safety signs and hazard pictorials—General principles GB 18224-2000 Safety code for the bridge type grab ship unloader GB/T 18224-2008 Safety code for the bridge type grab ship unloader GB/T 19418-2003 Arc-welded joints in steel—Guidance on quality levels for imperfections GB/T 20303.1-2006 Cranes—Cabins—Part 1:General GB/T 20303.1-2016 Cranes—Cabins and control stations—Part 1:General GB/T 20303.5-2006 Cranes—Cabins—Part 5:Overhead traveling and portal bridge cranes GB/T 20303.5-2021 Cranes—Cabins and control stations—Part 5:Overhead travelling and portal bridge cranes GB/T 24809.5-2009 Cranes—Requirements for mechanisms—Part 5:Bridge and gantry cranes GB 50231-1998 General code for construction and acceptance of mechanical equipment installation engineering GB 50231-2009 General code for construction and acceptance of mechanical equipment installation engineering GB 50256-2014 Electrical installation engineering: Specification for construction and acceptance of electrical equipment for crane operation GB 50278-2010 Code for construction and acceptance of crane installation engineering JB/T 6392-2008 crane wheel JB/T 6392.1-1992 The match between the type of car wheels, the profile shape and the track of the crane truck JB/T 6392.2-1992 Crane car wheel technical specifications JB/T 8905.1-1999 Three-point support gearboxes for cranes JB/T 8905.2-1999 Foot mounted gearboxes for cranes JB/T 8905.3-1999 Vertical gearboxes for cranes JB/T 8905.4-1999 Hollow shaft gearboxes for cranes JB/T 9003-2004 Crane Triple Gear Reducer JB/T 9003-1999 Crane Three-in-One Reducer JB/T 10559-2018 Cranes and machinery NDT inspection, ultrasonic testing of steel welds JB/T 10559-2006 Crane non-destructive testing ultrasonic testing of steel welds JB/T 10816-2007 Crane-mounted base type hard-toothed reduction gearbox JB/T 10817-2007 Three-point support hardened tooth flank gearboxes for cranes JGJ 82-2011 Technical specification for high strength bolt connections of steel structures