GB/T 22512.1-2012 Active National standards

GB/T 22512.1-2012 Petroleum and natural gas industries—Rotary drilling equipment—Part 1:Rotary drill stem elements

GB/T 22512.1-2012 Petroleum and natural gas industries—Rotary drilling equipment—Part 1:Rotary drill stem elements

Publish Date: 2012-03-09 Implement Date: 2012-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 22512.1-2012

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Oil drilling and extraction equipment and instruments

ICS Name: Exploration and drilling equipment

Publish Date: 2012-03-09

Implement Date: 2012-07-01

Pages: 70 pages

Scope

This part of GB/T 22512 specifies the requirements for the following drill string components: upper and lower square drill pipe plug valves, square drill pipes and hexagonal drill pipes, drill string conversion joints, standard steel drill collars and non-magnetic drill collars, drilling bits and coring bits, and heavyweight drill pipes (HWDP).
This part does not apply to drill pipes and drill pipe joints, rotating shoulder-type connection designs, thread measurement methods, or original gauges, calibration gauges, and working gauges.
Typical drill string assemblies applicable to this part are shown in Figure 1.

Development Information

Word Count: 131 Thousand words Pages: 70 pages

Referenced Standards

ISO 13665 API RP 7G API Spec 5DP ASTM A262 ASTM A434 ASTM E587 GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 5777-1996 Seamless steel pipe and tubing—Methods for ultrasonic testing GB/T 5777-2008 Seamless steel pipe and tubing methods for ultrasonic testing GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections GB/T 9445-1999 Qualification and certification for nondestructive testing personnel GB/T 9445-2005 Non-destructive testing—Qualification and certification of personnel GB/T 9445-2008 Non-destructive testing—Qualification and certification of personnel GB/T 9445-2015 Non-destructive testing—Qualification and certification of NDT personnel GB/T 15822.1-2005 Non-destructive testing—Magnetic particle testing—Part 1:General principles GB/T 15822.1-2024 Non-destructive testing—Magnetic particle testing—Part 1:General principles GB/T 18851.1-2005 Non-destructive testing—Penetrant testing—Part 1:General principles GB/T 18851.1-2012 Non-destructive testing—Penetrant testing—Part 1:General principles GB/T 20972.1-2007 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 1:General principles for selection of cracking resistant materials GB/T 20972.2-2008 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.3-2008 Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys)and other alloys GB/T 22512.2-2008 Petroleum and natural gas industries—Rotary drilling equiment—Part 2:Threading and gauging of rotary shouldered thread connections GB/T 9445-2024 Non-destructive testing—Qualification and certification of personnels GB/T 18851.1-2024 Non-destructive testing—Penetrant testing—Part 1:General principles GB/T 20972.2-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 2:Cracking-resistant carbon and low alloy steels,and the use of cast irons GB/T 20972.3-2025 Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Part 3:Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys

Adopt standards

ISO 10424-1:2004

Related Standards

GB/T 9253.9-1995 Abolished

GB/T 9253.9-1995 Drill pipe thread gauges

Publish Date: 1995-05-15

GB/T 9253.8-1995 Abolished

GB/T 9253.8-1995 Drill pipe threads

Publish Date: 1995-05-22

GB/T 16750.1-1997 Replaced

GB/T 16750.1-1997 The types, general parameters and conjunction sizes of electrical submersible pumping equipment

Publish Date: 1997-03-04

GB/T 16750.2-1997 Replaced

GB/T 16750.2-1997 Electrical submersible pump—Technical specifications

Publish Date: 1997-03-04

GB/T 16750.3-1997 Replaced

GB/T 16750.3-1997 The test method for electrical submersible pump units

Publish Date: 1997-03-04

GB/T 17386-1998 Replaced

GB/T 17386-1998 Recommended practice for sizing and selection of electric submersible pump installations

Publish Date: 1998-05-18