GB/T 28819-2023 Active National standards

GB/T 28819-2023 Aluminium alloy enclosures for gas-filled high-voltage switchgear

GB/T 28819-2023 Aluminium alloy enclosures for gas-filled high-voltage switchgear

Publish Date: 2023-12-28 Implement Date: 2024-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 28819-2023
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: High-voltage switchgear
ICS Name: High-voltage switchgear and controllers
Publish Date: 2023-12-28
Implement Date: 2024-07-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国高压开关设备标准化技术委员会(SAC/TC 65)
Pages: 39 pages

Scope

本文件规定了高压开关设备的铝合金外壳的正常和特殊使用条件,材料,设计,制造及工艺,缺陷的修补,铸造铝合金热处理,检验、检测和质量保证,压力释放装置的要求。
本文件适用于充有压缩的干燥空气、六氟化硫、氮气等或这些气体的混合气体在户外、户内安装的高压开关设备的铝合金外壳的设计、生产和检验、检测等。
注: 上述气体主要用于绝缘和/或灭弧,且设计压力通常大于0.3 MPa(相对压力)。
充气高压开关设备(包括刚性气体绝缘输电线路)铝合金外壳内包含的元件不仅仅局限于下列元件:
——断路器;
——负荷开关;
——隔离开关;
——接地开关;
——电流互感器;
——电压互感器;
——避雷器;
——母线及连接件。
还包括承压部件,如外壳带电的开关设备的三联箱(三通)等。

Development Information

Drafting Units:

平高集团有限公司、西安高压电器研究院股份有限公司、西安西电开关电气有限公司、江苏金鑫电器有限公司、陕西杉瑞电气有限公司、新东北电气集团高压开关有限公司、江苏勇龙电气有限公司、泰兴市长江电力设备有限责任公司、ABB(中国)有限公司、河南平高电气股份有限公司、福建裕能电力成套设备有限公司、青岛尚科高压电器研究院有限公司、苏州电器科学研究院股份有限公司、厦门ABB高压开关有限公司、青岛特锐德电气股份有限公司、厦门华电开关有限公司、泰开集团有限公司、日升集团有限公司、青岛益和电气集团股份有限公司、正泰电气股份有限公司、中科力祥科技股份有限公司、国网宁夏电力有限公司电力科学研究院、库柏(宁波)电气有限公司、浙江八达电子仪表有限公司时通电气分公司、江苏恒高电气制造有限公司、特变电工中发上海高压开关有限公司、上海西门子高压开关有限公司、西安西电高压开关有限责任公司、中广核核电运营有限公司、山东达驰高压开关有限公司、上海西电高压开关有限公司

Drafting Persons:

钟建英、田恩文、王向克、贾昕宇、韩国辉、申萌、郑延召、李六零、吴俊峰、徐新军、屈钧、陈天送、李秀坤、姜海林、骆祥华、林麟、李兴康、张重乐、杨晓娟、赵维洲、霍新林、陆静、张实、胡晶、梁景璇、丰正茂、李永全、宋德文、张旸、王瑞群、孙大永、李凯、杨凯、沈忠威、叶树新、邓小冬、常越、王亮、周丹、高伟勋、代金良、陈瑞、赵羲英

Word Count: 76 Thousand words Pages: 39 pages

Replace the following standards

Referenced Standards

GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 232-2010 Metallic materials—Bend test GB/T 1173-2013 Casting aluminum alloy GB/T 3246.1-2012 Inspection method for structure of wrought aluminum and aluminum alloy products—Part 1:Inspection method for microstructure GB/T 6519-2013 Ultrasonic inspection of wrought aluminium and magnesium alloy products GB/T 9438-2013 Aluminum alloy castings GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards GB/T 11346-2018 Radiograpial testing for aluminum alloy castings—Defect levels GB/T 32563-2016 Non-destructive testing—Ultrasonic testing—Test method for phased-array ultrasonic testing GB/T 34630.3-2017 Friction stir welding—Aluminium and its alloys—Part 3:Qualification of welding operators GB/T 34630.4-2017 Friction stir welding—Aluminium and its alloys—Part 4:Specification and qualification of welding procedures GB/T 34630.5-2017 Friction stir welding—Aluminium and its alloys—Part 5:Quality and inspection requirements NB/T 47014-2011 GB 150-1998 Steel pressure vessels GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 10858-2008 Aluminium and aluminium alloy wires and rods GB/T 10858-2023 Wire electrodes,wires and rods for welding of aluminium and aluminium alloys GB/T 12467.1-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 1:Guidelines for selection and use GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials—Part 1:Criteria for the selection of the appropriate level of quality requirements GB/T 12467.2-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 2:Comprehensive quality requirements GB/T 12467.2-2009 Quality requirements for fusion welding of metallic materials—Part 2:Comprehensive quality requirements GB/T 12467.3-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 3:Standards quality requirements GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials—Part 3:Standard quality requirements GB/T 12467.4-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 4:Elementary quality requirements GB/T 12467.4-2009 Quality requirements for fusion welding of metallic materials—Part 4:Elementary quality requirements GB/T 12467.5-2009 Quality requirements for fusion welding of metallic materials—Part 5:Standard documents need to conform to claim conformity to the quality requirements NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing NB/T 47013.11-2015 Non-destructive testing of pressure equipment - Part 11: X-ray digital imaging testing TSG Z6002-2010 Examination Rules for Welding Operators of Special Equipment GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets

Related Standards

Contact Us