GB/T 31817-2025 Active National standards

GB/T 31817-2025 Specification of coating for corrosion protection of windpower equipment

GB/T 31817-2025 Specification of coating for corrosion protection of windpower equipment

Publish Date: 2025-12-02 Implement Date: 2026-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 113
Download

Basic Information

Standard Code: GB/T 31817-2025
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Paint
ICS Name: The coating application process
Publish Date: 2025-12-02
Implement Date: 2026-07-01
Pages: 40 pages

Scope

This document specifies the classification, requirements, inspection rules, and acceptance criteria for protective coatings used on onshore and offshore wind power generation facilities, and describes the corresponding test methods.
This document applies to the initial and maintenance coatings of protective coatings on onshore and offshore wind power generation facilities.
This document does not apply to the initial and maintenance coatings of concrete substrates and fire-resistant areas on wind power generation facilities.

Development Information

Word Count: 61 Thousand words Pages: 40 pages

Replace the following standards

Referenced Standards

GB/T 1040.1-2006 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.1-2025 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets GB/T 1724-2019 Paints,varnishes and printing inks—Determination of fineness of grind GB/T 1725-2007 Paints,varnishes and plastics—Determination of non-volatile-matter content GB/T 1727-2021 General methods for preparation of coating films GB/T 1728-2020 Determination of drying time of coating and putty films GB/T 1732-1993 Determination of impact resistance of film GB/T 1732-2020 Determination of impact resistance of coating films GB/T 1741-2007 Test method for determining the resistance of paints film to mold GB/T 1741-2020 Test method for determining the resistance of paints film to mold GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats GB/T 1768-2006 Paints and varnishes—Determination of resistance to abrasion—Rotating abrasive rubber wheel method GB/T 1865-1997 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Filtered xenon-arc radiation GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation GB 3186-1982 Sampling paint products GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling GB/T 5206-2015 Paints and varnishes—Terms and definitions GB/T 5206.1-1985 Paints and varnishes—Vocabulary—Part 1:General terms GB/T 5206.2-1986 Paints and varnishes—Vocabulary—Part 2:Terminology of resins GB/T 5206.3-1986 Paints and varnishes—Vocabulary—Part 3:Pigment terms GB/T 5206.4-1989 Paints and varnishes—Vocabulary—Part 4:Terminology relating to physical and chemical properties of coatings and films GB/T 5206.5-1991 Paints and varnishes—Vocabulary—Part 5:Terminology relating to defects of coatings and films GB/T 5210-1985 Determination of adhesion of coats—Pull-off test GB/T 5210-2006 Paints and varnishes—Pull-off test for adhesion GB 6514-1995 Safety code for painting—Safety、 ventilation and air clean-up for painting process GB 6514-2008 Safety code for painting—Safety、ventilation and air clean-up for painting process GB 6514-2023 Safety code of practice for coating—Safety and ventilation for coating process GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods GB/T 6742-1986 Bend test for coating (cylindrical mandrel) GB/T 6742-2007 Paints and varnishes—Bend test(cylindrical mandrel) GB/T 6750-2007 Paints and varnishes—Determination of density—Pyknometer method GB/T 6823-1986 General specification for ballast tanks paint of ship GB/T 6823-2008 Ballast tanks paint for ship GB 7691-2003 Safety code for painting—Safety management general rule GB 7691-2025 General rules for safety management of coating operations GB/T 7790-1996 Test method for the resistance of cathodic disbondment of anticorrosive paint GB/T 7790-2008 Paints and varnishes—Determination of resistance to cathodic disbonding of coatings exposed to sea water GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 3:Preparation grades of welds,edges and other areas with surface imperfections GB/T 9258.1-2000 Coated abrasives—Grain size analysis—Part 1:Grain size distribution test GB/T 9269-1988 Determination of viscosity of architectural paints and coatings—Stormer viscosimeter method GB/T 9269-2009 Determination of viscosity of paints and coatings—Stormer viscosimeter method GB 9278-1988 Temperatures and humidities for conditioning and testing of paint specimens GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens GB/T 9286-1998 Paints and varnishes—Cross cut test for films GB/T 9286-2021 Paints and varnishes—Cross-cut test GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85° GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85° GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85° GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests GB 11118.1-1994 Hydraulic fluids of mineral oil type and synthetic hydrocarbon type GB 11118.1-2011 Hydraulic fluids of L-HL、L-HM、L-HV、L-HS and L-HG type GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces GB/T 13452.2-1992 Paints and varnishes—Determination of film thickness GB/T 13452.2-2008 Paints and varnishes—Determination of film thickness GB/T 13893-1992 Paints and varnishes—Determination of resistance to humidity(continuous condensation) GB/T 13893-2008 Paints and varnishes—Determination of resistance to humidity—Continuous condensation GB/T 13893.2-2019 Paints and varnishes—Determination of resistance to humidity —Part 2:Condensation(in-cabinet exposure with heated water reservoir) GB/T 13893.2-2019 Paints and varnishes—Determination of resistance to humidity —Part 2:Condensation(in-cabinet exposure with heated water reservoir) GB/T 15254-1994 Rubber, vulcanized—Determination of adhesion to metal—180°Peel test method GB/T 15254-2014 Rubber,vulcanized—Determination of adhesion to metal—180° peel test method GB/T 15608-1995 The Chinese color system GB/T 15608-2006 The Chinese color system GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—General introduction and classification GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 1:General introduction and classification GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) GB/T 18570.6-2005 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 6:Extraction of soluble contaminants for analysis—The Bresle method GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 6:Extraction of soluble contaminants for analysis—The Bresle method GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 9:Field method for the conductometric determination of water-soluble salts GB/T 18570.9-2025 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 9:Field method for the conductometric determination of water-soluble salts GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—General introduction and classification GB/T 19292.1-2003 Corrosion of metals and alloys—Corrosivity of atmospheres—Classification GB/T 19292.1-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1:Classification,determination and estimation GB/T 20624.2-2006 Paints and varnishes—Rapid-deformation (impact resistance) tests—Part 2:Falling-weight test,small-area indenter GB/T 23764-2009 Test method of photocatalytic materials for self-cleaning GB/T 23987.3-2025 Paints and varnishes—Methods of exposure to laboratory light sources—Part 3:Fluorescent UV lamps GB/T 30648.1-2014 Paints and varnishes—Determination of resistance to liquids—Part 1:Immersion in liquids other than water GB/T 30648.2-2015 Paints and varnishes—Determination of resistance to liquids—Part 2:Water immersion method GB/T 30786-2014 Paints and varnishes—Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing GB 30981.2-2025 Limit of harmful substances of coatings—Part 2:Industrial coatings GB/T 31586.1-2015 Corrosion protection of steel structures by protective paint systems—Assessmentof,and acceptance criteria for,the adhesion/cohesion (fracture strength) of acoating—Part 1: Pull-off testing GB/T 31586.2-2015 Corrosion protection of steel structures by protective paint systems—Assessment of,and acceptance criteria for,the adhesion/cohesion(fracture strength)of a coating—Part 2:Cross-cut testing and ×-cut testing GB/T 37356-2019 Paints and varnishes—Lighting and procedure for visual assessments of coatings GB 50212-2014 Code for construction of building anticorrosive engineering HG/T 3668-2020 Zinc-rich base paint HG/T 3668-2009 Zinc-rich undercoat。 HG/T 3668-2000 Zinc-rich undercoating HG/T 3792-2014 Cross-linked Fluororesin Coating HG/T 3792-2005 Cross-linked Fluororesin Coating HG/T 4104-2019 Water-based fluororesin coating HG/T 4104-2009 Construction water-based fluororesin paint HG/T 4336-2012 Glass flake anticorrosive coatings HG/T 4337-2012 Non-solvent liquid epoxy coating for steel water piping HG/T 4561-2013 Unsaturated polyester putty HG/T 4564-2013 Low surface treatment tolerance epoxy coating HG/T 4755-2014 HG/T 4755-2014 Polysiloxane paints HG/T 5059-2016 Anti-corrosion coating for offshore oil platforms HG/T 5368-2018 Polymeric Aspartic Acid Esters Anticorrosive Coating HG/T 5573-2019 Graphene zinc powder paint ISO 2063-1 ISO 12944-6 ISO 12944-9 ISO/TS 19392-2

Related Standards

Contact Us