GB 5751-1986
Replaced
T/CCS 038-2023
Active
Group standards
T/CCS 038-2023 Technical specification of unmanned rapid quantitative intelligent loading system
T/CCS 038-2023 Technical specification of unmanned rapid quantitative intelligent loading system
Price:
$ 31.00
Basic Information
Standard Code:
T/CCS 038-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Coal used for coking, chemical industry, and building materials
ICS Name:
\nCoal
Publish Date:
2023-12-29
Implement Date:
2024-04-01
Pages:
16 pages
Scope
This document specifies the technical requirements, metrological requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for unmanned rapid quantitative intelligent loading systems for bulk solid materials such as coal.
This document is applicable to unmanned rapid quantitative intelligent loading systems for trucks and trains used to load bulk solid materials such as coal.
Development Information
Referenced Standards
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB/T 4167-1984 Class 1~5 weights
GB/T 4167-2011 Weights
GB/T 4167-2024 Weights
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 7251.2-1997 Low-voltage switchgear and control gear assemblies—Part 2:Particular requirements for busbar trunking systems(busways)
GB 7251.2-2006 Low-voltage switchgear and controlgear assemblies—Part 2:Particular requirements for busbar trunking systems (busways)
GB/T 7251.2-2023 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies
GB/T 7551-1997 Load cells
GB/T 7551-2008 Load cells
GB/T 14250-1993 Terminology of weighing instrument
GB/T 14250-2008 Terminology of weighing instruments
GB/T 35449-2017 Automatic quantitative loading vehicle system
GB 50016-2014 Code for fire protection design of buildings
GB 50017-2017 Code for design of steel structures
GB 50054-2011 Code for design of low voltage electrical installations
GB 50057-2010 Code for design protection of structures against lightning
GB 50205-2001 Code for acceptance of construction quality of steel structures
GB 50205-2020 Standard for acceptance of construction quality of steel structures
GB 50217-2018 Standard for design of cables of electric power engineering
GBZ 2(所有部分)
GBZ/T 192.1
JTG B01
JTG D60-2004 General code for design of highway Bridges and Culverts
MT/T 776-1998 The inspection specification for the hydraulic system components of coal mining machinery at the factory
MT/T 776-2025 Specification for routine inspection of coal mining machinery hydraulic system assembly
Related Standards
GB 481-1993
abolished_transferred
GB 481-1993 Sampling method of coal sample for production
GB/T 15223-1994
Replaced
GB/T 15223-1994 Plastics—Liquid resins—Determination of density by the pyknometer method
GB/T 15224.1-1994
Replaced
GB/T 15224.1-1994 Classification for quality of coal—Classification for ash yield of coal
GB/T 15224.2-1994
Replaced
GB/T 15224.2-1994 Classification for quality of coal—Classification for sulphur content of coal
GB/T 15224.3-1994
Replaced