GB/T 3836.34-2021 Active National standards

GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies

GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 3836.34-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Explosion-proof electrical appliances
ICS Name: Electric equipment for use in explosive environments
Publish Date: 2021-10-11
Implement Date: 2022-05-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国防爆电气设备标准化技术委员会(SAC/TC 9)
Pages: 18 pages

Scope

本文件规定了由成套设备制造商负责的爆炸性环境用成套设备的设计、结构、组装、试验、检查、标志、文件和评定的要求。
本文件的要求适用于符合GB/T 3836(所有部分),构成成套设备和有独立防爆合格证的单个设备。这些单个设备作为构成成套设备的一部分组合在一起。也包括超出构成成套设备的单个设备防爆合格证范围方面的要求。
本文件也包括对危险场所用成套设备的附加要求的评定,但不包括对非危险场所的要求。假定,除本文件的要求外,对适用于非危险场
所的其他电气或机械要求的符合性将由同一机构或不同的机构进行验证。
本文件不适用于:
——整体符合一个或多个GB/T 3836防爆型式标准的设备;
——符合GB/T 3836.17的正压房间“p”和符合IEC TR 60079-16的人工通风保护分析室,以及其他标准规定的特定防爆成套设备;
——GB/T 3836.15范围内在最终用户现场的安装;
——危险场所分类;
——固有爆炸性环境和炸药或自燃物质形成的粉尘(例如,炸药的制造和加工);
——医疗室;
——可燃性薄雾危险场所内的电气装置。
本文件仅用于为成套设备的初始供应提供验证。
注1: GB/T 3836.15提供了对可燃性粉尘或飞絮与可燃性气体或蒸气形成的杂混物危险环境的要求的附加指南。
当本文件的要求与GB/T 3836.1或GB/T 3836.28的要求有冲突时,本文件的要求优先。
注2: 对于本文件,优先于GB/T 3836.1和GB/T 3836.28的要求仅有成套设备的标志。
注3: 本文件没有考虑煤矿井下特殊情况,但煤矿井下用成套设备可参考使用。

Development Information

Drafting Units:

南阳防爆电气研究所有限公司、上海工业自动化仪表研究院有限公司、正星科技股份有限公司、中煤科工集团重庆研究院有限公司、华荣科技股份有限公司、卧龙电气南阳防爆集团股份有限公司、创正电气股份有限公司

Drafting Persons:

张刚、王巧立、王军、徐建平、张立新、邸志强、章明高、吴斌、张卫、李晓宁

Word Count: 37 Thousand words Pages: 18 pages

Same series standard

GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d” GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e” GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i” GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure "p" GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n” GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m” GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k” GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t” GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres

Referenced Standards

GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d” GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d" GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d” GB 3836.3-2000 Electrical apparatus for explosive gas atmospheres—Part 3:Increased safety “e” GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e" GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e” GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i” GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i" GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i” GB 3836.5-2004 Electrical apparatus for explosive gas atmosphere—Part 5:Pressurized enclosures"p" GB/T 3836.5-2017 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure"p" GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure "p" GB 3836.6-2004 Electrical apparatus for explosive gas atmospheres—Part 6:Oil-immersion"o" GB/T 3836.6-2017 Explosive atmospheres—Part 6:Equipment protection by liquid immersion“o” GB 3836.7-2004 Electrical apparatus for explosive gas atmospheres—Part 7:Powder filling"q" GB/T 3836.7-2017 Explosive atmospheres—Part 7:Equipment protection by powder filling“q” GB 3836.8-2003 Electrical apparatus for explosive gas atmospheres—Part 8:Type of protection “n” GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n” GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n” GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m" GB 3836.9-2006 Electrical apparatus for explosive gas atmospheres—Part 9:Encapsulation "m" GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m” GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m” GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap GB/T 3836.11-2008 Explosive atmospheres—Part 11:Equipment protection by flameproof enclosures “d”—Method of test for ascertainment of maximum experimental safe gap GB/T 3836.11-2017 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data GB/T 3836.11-2022 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents GB/T 3836.12-2008 Explosive atmospheres—Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current GB/T 3836.12-2019 Explosive atmospheres—Part 12:Material characteristics for combustible dusts—Test methods GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres GB 3836.13-2013 Explosive atmospheres—Part 13:Equipment repair,overhaul and reclamation GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines) GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines) GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v” GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO) GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s” GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k” GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t” GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE) GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines) GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres

Adopt standards

IEC TS 60079-46:2017

Related Standards

Contact Us