GB/T 13960.2-2008
Replaced
National standards
GB/T 13960.2-2008 Safety of transportable motor operated electric tools—Part 2:Particular requirements for circular saws
GB/T 13960.2-2008 Safety of transportable motor operated electric tools—Part 2:Particular requirements for circular saws
Basic Information
Standard Code:
GB/T 13960.2-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Electric tools
Publish Date:
2008-09-19
Implement Date:
2009-06-01
Pages:
9 pages
Scope
This section applies to portable circular saws (defined in 3.101) that cut wood and similar materials with saw blades not exceeding 260 mm in diameter.
Where applicable, this standard addresses the common hazards caused by tools that people encounter when using tools and when misusing tools in a reasonably foreseeable manner.
Tools with electrically heated components fall within the scope of this standard. The requirements for these heating elements are specified in the relevant sections of GB 4706.
For tools that are not isolated from the power grid and whose basic insulation is not designed for the rated voltage of the tool, the requirements are specified in Appendix B.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 1002-1996 Single phase plugs and socket-outlets for household and similar purposes Types、basic parameters and dimensions
GB 1003-1999 Three phases plugs and socket-outlets for household and similar purposes Types,basic parameters and dimensions
GB 1406-2001 Types and dimensions of Edison screw lamp caps
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements
GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB 2099.2-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB/T 2099.2-2012 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB 2099.3-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirement for adaptors
GB 2099.3-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for adaptors
GB/T 2099.3-2015 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.4-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
GB/T 2099.5-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
GB/T 2099.6-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for fused plugs
GB/T 2099.7-2015 Plugs and socket-outlets for household and similar purposes—Part 2-7:Particular requirements for cord extension sets
GB 2099.7-2024 Cord extension socket-outlets for household and similar purposes—Safety technical specification
GB/T 2099.8-2017 Plugs and socket-outlets for household and similar purposes—Part 2-4:Particular requirements for plugs and socket-outlets for SELV
GB/T 2099.9-2017 Plugs and socket-outlets for household and similar purposes—Part 2-9:Particular requirements for socket-outlets for information
GB/T 2099.10-2026 Plugs and socket-outlets for household and similar purposes—Part 10:Particular requirements for plugs and socket-outlets applicable to Hong Kong special administrative region
GB/T 2099.31-2025 Plugs and socket-outlets for household and similar purposes—Part 31:Particular requirements for socket-outlets incorporating USB power supply
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 4343.2-1999 Electromagnetic compatibility—Requirements for household appliances, electric tools and similar apparatus—Part 2:Immunity—Product family standard
GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements
GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method
GB 5013.4-1997 Rubber insulated cables of rated voltages up to and including 450/750V—Part 4:Cords and flexible cables
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB 5023.5-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 5:Flexible cables (cords)
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6462-1986 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6462-2025 Metallic and oxide coatings—Measurement of coating thinckness—Microscopical method
GB 8898-2001 Audio, video and similar electronic apparatus—Safety requirements
GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 9364.3-2018 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation
GB/T 14536.1-2008 Automatic electrical controls for household and similar use—Part 1:General requirements
GB 15092.1-2003 Switches for appliances Part 1:General requirements
GB/T 11918-2001 Plugs, socket-outlets and couplers for industrial purposes—Part 1:General requirements
GB/T 11919-2001 Plugs, socket-outlets and couplers for industrial purposes—Part 2:Dimensional interchangeability requirements for pin and contact-tube accessories
GB 13140.3-1998 Connecting devices for low voltage circuits for household and similar purposes Part 2:Particular requirements for connecting devices as separate entities with screwless-type clamping units
GB/T 13140.3-2008 Connecting devices for low-voltage circuitsfor household and similar purposes—Part 2:Particular requirements for connecting devices as separate entities with screwless-type clamping units
GB/T 14472-1998 Fixed capacitors for use in electronic equipment—Part 14:Sectional specification:Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
GB 19212.1-2008 Safety of power transformers,power supplies,reactors and similar products—Part 1:General requirements and tests
GB 19212.5-2006 Safety of power transformers, power supply units and similar—Part 5:Particular requirements for isolating transformers for general use
GB 19212.7-2006 Safety of power transformers, power supply units and similar—Part 7:Particular requirements for safety isolating transformers for general use
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 17465.2-1998 Appliance couplers for household and similar general purposes Part 2:Interconnection couplers for household and similar equipment
GB/T 17465.2-2009 Appliance couplers for household and similar general purposes—Part 2:Interconnection couplers for household and similar equipment
GB/T 17465.3-2008 Appliance couplers for household and similar general purposes—Part 2:Appliance couplers with a degree of protection higher than IPX0
GB 17465.4-2009 Appliance couplers for household and similar general purposes—Part 2:Couplers dependent on appliance weight for engagement
GB/T 17465.4-2015 Appliance couplers for household and similar general purposes—Part 2-4:Couplers dependent on appliance weight for engagement
GB/T 17465.5-2017 Appliance couplers for household and similar general purposes—Part 2-1:Sewing machine couplers
GB/T 17465.6-2022 Appliance couplers for household and similar general purposes—Part 3:Standard sheets and gauges
IEC 60216-5
IEC 60695-2-11:2000
IEC 60695-10-2:2003
IEC 60695-11-5:2004
IEC 60695-11-10:1999
IEC 60738-1
IEC 60760:1989
IEC 60998-2-1
IEC 60998-2-2
IEC 60999-1:1999
IEC 60249-2-4
IEC 60249-2-5
IEC 60825-1:2007
IEC 60906-1
IEC 61032:1997
ISO 7010:2003
ISO 9772:2001
ISO 13849-1:2004
ISO 13849-2:2003
Related Standards
GB 3883.10-1991
Replaced
GB 3883.12-1991
Replaced
GB 3883.12-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for concrete vibrators (internal vibrators)
GB 3883.3-1991
Replaced
GB 3883.3-1991 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for electric grinders, polishers and disk-type sanders
GB 3883.6-1991
Replaced
GB 3883.6-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for electric drills
GB 13960-1992
Replaced
GB 13960-1992 Safety of transportable motor-operated electric tools—Part 1:General requirements
GB/T 13956-1992
Abolished