CJ/T 466-2014
Active
Industry standards-Urban construction
CJ/T 466-2014 Double-press extrusion stainless steel gas pipes and fittings
CJ/T 466-2014 Double-press extrusion stainless steel gas pipes and fittings
Basic Information
Standard Code:
CJ/T 466-2014
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Gas supply project
ICS Name:
The facilities in the building
Publish Date:
2014-12-04
Implement Date:
2015-05-01
Pages:
28 pages
Scope
This standard specifies the terms and definitions, marking, materials, specifications and dimensions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of stainless steel pipes (hereinafter referred to as steel pipes) and double crimp fittings (hereinafter referred to as fittings) used for gas transmission.
This standard is applicable to the design, manufacture, and inspection of stainless steel pipes and double crimp fittings used for building gas transmission with a temperature range of -20 ℃ to 60 ℃, a nominal size of DN15 to DN100, and a nominal pressure not exceeding 0.4 MPa.
Development Information
Referenced Standards
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 531-1999 Rubber—Determination of indentation hardness by means of pocket hardness meters
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 531.2-2009 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 2:IRHD pocket meter method
GB/T 2100-2002 Corrosion-resistant steel castings for general applications
GB/T 2100-2017 Corrosion-resistanst steel castings for general applications
GB/T 3280-1992 Cold rolled stainless steel sheets and plates
GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip
GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels
GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels
GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels
GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels
GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels
GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels
GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels
GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid
GB/T 5721-1993 General rules of identification, packaging, transportation and storage for rubber sealing products
GB/T 6031-1998 Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6031-2017 Rubber,vulcanized or thermoplastic—Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7735-1995 Steel tubes—The inspection method on eddy current test
GB/T 7735-2004 Steel tubes-The inspection method on eddy current test
GB/T 7735-2016 Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for detection of imperfections
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic—Determination of compression set at ambient elevated or low temperatures
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7759.2-2014 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 2:At low temperatures
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 19228.1-2003 Stainless steel press-fittings
GB/T 19228.1-2011 Stainless steel press-fitting assemblies—Part 1:Press-fittings
GB/T 19228.1-2024 Stainless steel press-fitting assemblies—Part1:Press-fittings
GB/T 19228.2-2003 Light gauge stainless steel pipes for stainless steel press-fittings
GB/T 19228.2-2011 Stainless steel press-fitting assemblies—Part 2:Light gauge stainless steel tubes for press-fittings
HG/T 3087-2001 The rapid determination method for storage period of static sealing rubber parts
HG/T 3092-1988 Material of rubber seals used for gas supply pipes and fittings
Related Standards
GB 6932-2001
Replaced
GB/T 19249-2003
Replaced
GB/T 19249-2003 Reverse osmosis water treatment equipment
GB/T 19913-2005
Replaced
GB/T 19913-2005 Cast iron heating radiator
CJ/T 245-2007
Abolished
CJ/T 245-2007 Syphonic roof outlet
CJ/T 133-2007
Replaced
CJ/T 133-2007 Integrated circuit card water meter
CJ/T 241-2007
Active