NB/T 47019.6-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 6:Ferrite/austenite duplex steel

NB/T 47019.1-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 1:General Requirements NB/T 47019.2-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 2:Non-alloy and alloy steel with room temperature properties NB/T 47019.3-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 3:Non-alloy and alloy steel with specified elevated temperature properties NB/T 47019.4-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 4:Low alloy steel for low-temperature service NB/T 47019.5-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 5:Stainless steel NB/T 47019.7-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 7:Copper and copper alloy/tube NB/T 47019.8-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 8:Titanium and titanium alloy

NB/T 47019.6-2021 Nitriled piping technical requirements for boilers and heat exchangers Part 6: Austenitic-ferromagnetic duplex stainless steel

GB/T 223.66-1989 Methods for chemical analysis of iron, steel and alloy—The thiocyanate chlorpromazine hydrochloride—chloro form extraction photometric method for the determination of tungsten content GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method GB/T 223.68-1997 Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content GB/T 223.69-1997 Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace GB/T 223.70-1989 Methods for chemical analysis of iron, steel and alloy—The o-phenanthroline spectrophotometric method for the determination of iron content GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method GB/T 223.73-1991 Methods for chemical analysis of iron, steel and alloy—The titanium trichloride-potassium dichromate volumetric method for the determination of iron content GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 241-1990 Metal tubes—Hydrostatic pressure testing GB/T 241-2007 Metal materials—Tube—Hydrostatic pressure test GB/T 241-2025 Metallic materials—Tube—Hydrostatic pressure test GB/T 242-1997 Metallic materials—Tube—Drift expanding test GB/T 242-2007 Metal materials—Tube—Drift-expending test GB/T 246-1997 Metallic materials—Tube—Flattening test GB/T 246-2007 Metal materials—Tube—Flattening test GB/T 246-2017 Metallic materials—Tube—Flattening test GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 5777-1996 Seamless steel pipe and tubing—Methods for ultrasonic testing GB/T 5777-2008 Seamless steel pipe and tubing methods for ultrasonic testing GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections GB/T 7735-1995 Steel tubes—The inspection method on eddy current test GB/T 7735-2004 Steel tubes-The inspection method on eddy current test GB/T 7735-2016 Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for detection of imperfections JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing NB/T 47019.1-2021 NB/T 47019.1-2021 Ordering Technical Conditions for Tubes Used in Boilers and Heat Exchangers Part 1: General Requirements NB/T 47019.1-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 1:General Requirements