NB/T 47019.3-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 3:Non-alloy and alloy steel with specified elevated temperature properties

NB/T 47019.1-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 1:General Requirements NB/T 47019.2-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 2:Non-alloy and alloy steel with room temperature properties NB/T 47019.4-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 4:Low alloy steel for low-temperature service NB/T 47019.5-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 5:Stainless steel NB/T 47019.6-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 6:Ferrite/austenite duplex steel NB/T 47019.7-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 7:Copper and copper alloy/tube NB/T 47019.8-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 8:Titanium and titanium alloy

NB/T 47019.3-2021 Specifications for the technical conditions for ordering of boiler and heat exchanger pipes - Part 3: Non-alloy and alloy steels with specified high-temperature properties

GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 224-1987 Determination of depth of decarburization of steel GB/T 224-2008 Determination of depth of decarburization of steels GB/T 224-2019 Determination of the depth of decarburization of steels GB/T 226-1991 Etch test for macrostructure and defect of steels GB/T 226-2015 Test method for macrostructure and defect of steel by etching GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 241-1990 Metal tubes—Hydrostatic pressure testing GB/T 241-2007 Metal materials—Tube—Hydrostatic pressure test GB/T 241-2025 Metallic materials—Tube—Hydrostatic pressure test GB/T 242-1997 Metallic materials—Tube—Drift expanding test GB/T 242-2007 Metal materials—Tube—Drift-expending test GB/T 246-1997 Metallic materials—Tube—Flattening test GB/T 246-2007 Metal materials—Tube—Flattening test GB/T 246-2017 Metallic materials—Tube—Flattening test GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 4338-1995 Metallic materials—Tensile testing at elevated temperature GB/T 4338-2006 Metallic materials—Tensile testing at elevated temperature GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 5777-1996 Seamless steel pipe and tubing—Methods for ultrasonic testing GB/T 5777-2008 Seamless steel pipe and tubing methods for ultrasonic testing GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections GB/T 6394-2002 Metal-methods for estimating the average grain size GB/T 6394-2017 Determination of estimating the average grain size of metal GB/T 7735-1995 Steel tubes—The inspection method on eddy current test GB/T 7735-2004 Steel tubes-The inspection method on eddy current test GB/T 7735-2016 Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for detection of imperfections NB/T 47019.1-2021 NB/T 47019.1-2021 Ordering Technical Conditions for Tubes Used in Boilers and Heat Exchangers Part 1: General Requirements NB/T 47019.1-2011 Purchase technical specification for boiler & heater exchanger tubes/pipes Part 1:General Requirements YB/T 4149-2018 Continuous casting round tube billet YB/T 4149-2006 Continuously cast round billet for seamless steel tube rolling YB/T 4173-2021 High-temperature forged and bored thick-walled seamless steel tube YB/T 4173-2008 Forged and bored seamless steel pipes with heavy wall for high-temperature service YB/T 5137-1998 Round blank of seamless steel tube for high pressure YB/T 5137-2007 High-pressure seamless round tube for hot rolling and forged steel tube blank YB/T 5137.1-2018 High-pressure heat-rolled and forged seamless steel tube blanks