GB/T 26287-2022 Aluminium alloys sacrificial anode for electrical water heater

GB/T 26287-2010 Aluminium alloys sacrificial anode for electrical water heater

GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 700-1988 Carbon structural steels GB/T 700-2006 Carbon structural steels GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys GB/T 3199-1996 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing GB/T 3199-2007 Wrought aluminium and aluminium alloy products—Packing, marking, transporting and storing GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 8170-1987 Rules for rounding off of numberical values GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 17432-1998 Methods of sampling for analysing the chemical composition of wrought aluminum and aluminum alloy GB/T 17432-2012 Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys GB/T 20975.1-2007 Chemical analysis methods of aluminium and aluminium alloys—Part 1:Determination of mercury content—Cold atomic absorption spectrometric method GB/T 20975.2-2007 Chemical analysis methods of aluminium and aluminium alloys—Part 2:Determination of arsenic content—Molybdenum blue spectrophotometric method GB/T 20975.10-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 10:Determination of tin content GB/T 20975.11-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 11:Determination of lead content—Flame atomic absorption spectrometric method GB/T 20975.12-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 12:Determination of titanium content GB/T 20975.13-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 13:Determination of vanadium content—N-benzoyl-Nphenylhydroxylamine spectrophotometric method GB/T 20975.14-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 14:Determination of nickel content GB/T 20975.15-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 15:Determination of boron content GB/T 20975.16-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 16:Determination of magnesium GB/T 20975.17-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 17:Determination of strontium content—Flame atomic absorption spectrometric method GB/T 20975.18-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 18:Determination of chromium content GB/T 20975.19-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 19:Determination of zirconium content GB/T 20975.20-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 20:Determination of gallium content—Butyrhodamine B spectrophotometric method GB/T 20975.21-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 21:Determination of calcium content—Flame atomic absorption spectrometric method GB/T 20975.22-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 22:Determination of beryllium content—SCR spectrophotometric method GB/T 20975.23-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 23:Determination of antimony content—Potassium iodide spectrophotometric method GB/T 20975.24-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 24:Determination of total rare earth contents GB/T 20975.3-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 3:Determination of copper content GB/T 20975.4-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 4:Determination of iron content—Orthopenanthroline photometric method GB/T 20975.5-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 5:Determination of silicon content GB/T 20975.6-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 6:Determination of cadmium content—Flame atomic absorption spectrometric method GB/T 20975.7-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 7:Determination of manganese content—Potassium periodate spectrophotometric method GB/T 20975.8-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 8:Determination of zinc content GB/T 20975.9-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 9:Determination of lithium content—Flame atomic absorption spectrometric method GB/T 20975.25-2008 Methods for chemical analysis of aluminium and aluminium alloys—Part 25:Inductively coupled plasma atomic emission spectrometric method GB/T 20975.26-2013 Methods for chemical analysis of aluminium and aluminium alloys—Part 26:Determination of carbon content—Infrared absorption method GB/T 20975.11-2018 Methods for chemical analysis of aluminium and aluminium alloys—Part 11:Determination of lead content GB/T 20975.1-2018 Methods for chemical analysis of aluminium and aluminium alloys—Part 1:Determination of mercury content GB/T 20975.2-2018 Methods for chemical analysis of aluminium and aluminium alloys—Part 2:Determination of arsenic content GB/T 20975.27-2018 Methods for chemical analysis of aluminium and aluminium alloys—Part 27:Determination of cerium,lanthanum,scandium—Inductively coupled plasma atomic emission spectrometry method GB/T 20975.28-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry GB/T 20975.29-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 29:Determination of molybdenum content—Thiocyanate spectrophotometry GB/T 20975.30-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 30:Determination of hydrogen content—Heating extraction-thermal conductivity method GB/T 20975.31-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 31:Determination of phosphorus content—Molybdenum blue spectrophotometry GB/T 20975.10-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 10:Determination of tin content GB/T 20975.12-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 12:Determination of titanium content GB/T 20975.14-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 14:Determination of nickel content GB/T 20975.16-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 16:Determination of magnesium content GB/T 20975.18-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 18:Determination of chromium content GB/T 20975.22-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 22:Determination of beryllium content GB/T 20975.23-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 23:Determination of antimony content GB/T 20975.24-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 24:Determination of total rare earth content GB/T 20975.25-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 25:Determination of elements content—Inductively coupled plasma atomic emission spectrometric method GB/T 20975.3-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 3:Determination of copper content GB/T 20975.35-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 35:Determination of tungsten content—Thiocyanate spectrophotometric method GB/T 20975.36-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 36:Determination of silver content—Flame atomic absorption spectrometry GB/T 20975.4-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 4:Determination of iron content GB/T 20975.5-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 5:Determination of silicon content GB/T 20975.7-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 7:Determination of manganese content GB/T 20975.9-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 9:Determination of lithium content—Flame atomic absorption spectrometry GB/T 20975.37-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 37:Determination of niobium content GB/T 20975.17-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 17:Determination of strontium content GB/T 20975.21-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 21:Determination of calcium content GB/T 20975.6-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 6:Determination of cadmium content GB/T 20975.13-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 13:Determination of vanadium content GB/T 20975.15-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 15:Determination of boron content GB/T 20975.19-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 19:Determination of zirconium content GB/T 20975.20-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 20:Determination of gallium content—Butyrhodamine B spectrophotometric method GB/T 20975.32-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 32:Determination of bismuth content GB/T 20975.33-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 33:Determination of potassium content—Flame atomic absorption spectrometric method GB/T 20975.34-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 34:Determination of sodium content—Flame atomic absorption spectrometric method GB/T 20975.8-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 8:Determination of zinc content