GB 17466-1998
Replaced
GB/T 3783-2019
Active
National standards
GB/T 3783-2019 General specifications for low-voltage apparatus in ships
GB/T 3783-2019 General specifications for low-voltage apparatus in ships
Price:
$ 140
Basic Information
Standard Code:
GB/T 3783-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Low-voltage electrical equipment
ICS Name:
Comprehensive Electrical Devices
Publish Date:
2019-03-25
Implement Date:
2019-10-01
Pages:
49 pages
Scope
This standard specifies the terms and definitions, symbols and codes, characteristics, normal use, installation and transportation conditions, structural and performance requirements, testing, classification, marking, installation, and packaging of marine low-voltage electrical equipment.
This standard applies to marine low-voltage electrical equipment (hereinafter referred to as electrical equipment) with a rated voltage of AC 1,000 V or DC 1,500 V and below, including control and distribution electrical equipment for ships and mobile and fixed offshore installations.
Development Information
Replace the following standards
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.101-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test:Inclinations and swings
GB/T 2900.1-1992 Electrotechnical terminology—Fundamental terms
GB/T 2900.1-2008 Electrotechnical terminology—Fundamental terms
GB/T 2900.18-1992 Electrotechnical terminology Low voltage apparatus
GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.5-2017 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure"p"
GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n”
GB/T 4025-2003 Basic and safety principles for man-machine interface, marking and identification Coding principles for indication devices and actuators
GB/T 4025-2010 Basic and safety principles for man-machine interface,marking and identification—Coding principles for indicators and actuators
GB/T 4026-2010 Basic and safety principles for man-machine interface,marking and identification—Identification of equipment terminals and conductor terminations
GB/T 4205-2003 Man-machine interface(MMI)—Actuating principles
GB/T 4205-2010 Basic and safety principles for man-machine interface(MMI),marking and identification—Actuating principles
GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6113.201-2017 Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-1:Methods of measurement of disturbances and immunity—Conducted disturbance measurements
GB/T 6113.203-2016 Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3:Methods of measurement of disturbances and immunity—Radiated disturbance measurements
GB/T 7094-2016 Vibration(sinusoidal)test method for electrical installations in ships
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 11020-2005 Flammability of solid non-metallic materials when exposed to flame sources—List of test methods
GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation
GB/T 11026.1-2016 Electrical insulating materials—Thermal endurance properties—Part 1:Ageing procedures and evaluation of test results
GB/T 11026.2-2012 Electrical insulating materials—Thermal endurance properties—Part 2:Choice of test criteria
GB/T 11026.3-2006 Electrical insulating materials—Thermal endurance properties—Part 3:Instructions for calculating thermal endurance characteristics
GB/T 11026.4-2012 Electrical insulating materials—Thermal endurance properties—Part 4:Ageing ovens—Single-chamber ovens
GB/T 11026.5-2010 Electrical insulating materials—Thermal endurance properties—Part 5:Ageing ovens—Precision ovens for use up to 300 ℃
GB/T 11026.6-2010 Electrical insulating materials—Thermal endurance properties—Part 6:Ageing ovens—Multi-chamber ovens
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 13951-2016 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
GB/T 14048.1-2012 Low-voltage switchgear and controlgear—Part 1:General rules
GB/T 14048.2-2008 Low-voltage switchgear and controlgear—Part 2:Circuit-breakers
GB/T 17193-1997 Extra-heavy duty rigid steel conduits for electrical installations
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 17626.16-2007 Electromagnetic compatibility—Testing and measurement techniques—Test for immunity to conducted,common mode disturbances in the frequency range 0 Hz to 150 kHz
JB/T 6317-2015 Marine electromechanical control circuit electrical equipment
Related Standards
GB/T 14048.1-2000
Replaced
GB/T 14048.1-2000 Low-voltage switchgear and controlgear—General rules
GB/T 13539.6-2002
Replaced
GB/T 13539.6-2002 Low-voltage fuses Part 2:Supplementary requirements for fuses by authorized persons(fuses mainly for industrial application)—Sections 1 to 5:Examples of standardized fuses
GB 14048.1-2006
Replaced
GB 14048.1-2006 Low-voltage switchgear and controlgear—Part 1:General rules
GB/T 20645-2006
Replaced
GB/T 20645-2006 Specific environmental condition—Technical requirements of low-voltage apparatuses for plateau
GB/T 21706-2008
Active