GB/T 41982-2022 High alloy heat-resisting steel thick wall pipes and forgings used for power station—General specification

GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 226-1991 Etch test for macrostructure and defect of steels GB/T 226-2015 Test method for macrostructure and defect of steel by etching GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 246-1997 Metallic materials—Tube—Flattening test GB/T 246-2007 Metal materials—Tube—Flattening test GB/T 246-2017 Metallic materials—Tube—Flattening test GB/T 1979-2001 Standard diagrams for macrostructure and defect of structural steels GB/T 1979-2025 Evaluation of macrostructural defects in structural steels—Acid etching method and ultrasonic testing method GB/T 2039-1997 Metallic materials—Creep and stress-rupture test in tension GB/T 2039-2012 Metallic materials—Uniaxial creep testing method in tension GB/T 2039-2024 Metallic materials—Uniaxial creep testing method in tension GB/T 2102-1988 Acceptance, packing, marking, and certification of pipe GB/T 2102-2006 Acceptance, packing, marking and quality certification of steel pipe GB/T 2102-2022 Acceptance,packaging,marking and quality certification for steel tubular products GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections GB/T 6060.2-1985 Roughness comparison specimens—Ground, turned, bored,milled, shaped and planed GB/T 6060.2-2006 Roughness comparison specimens—Ground,turned,bored,milled,shaped and planed GB/T 6394-2002 Metal-methods for estimating the average grain size GB/T 6394-2017 Determination of estimating the average grain size of metal GB/T 7735-2016 Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for detection of imperfections GB/T 8541-1997 Terminology of forging and stamping GB/T 8541-2012 Terminology of forging and stamping GB/T 10561-2005 Steel—Determination of content of nonmetallic inclusions—Micrographic method using standards diagrams GB/T 11261-1989 Methods for chemical analysis of high carbon chromium bearing steel The pulse heating inert gas fusion-infra red absorption method for the determination of oxygen content GB/T 11261-2006 Steel and iron—Determination of oxygen content—The pulse heating inert gas fusion-infra-red absorption method GB/T 13298-1991 Metal—Inspection method of microstructure GB/T 13298-2015 Inspection methods of microstructure for metals GB/T 17394.1-2014 Metallic materials—Leeb hardness test—Part 1:Test method GB/T 17394.1-2025 Metallic materials—Leeb hardness test—Part 1:Test method GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20124-2006 Steel and iron—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas (Routine method) DL/T 473-2017 Large diameter three-way pipe fittings technical specification DL 473-1992 Large diameter three-way pipe fittings technical specification DL/T 1719-2017 Guidelines for testing metal components using portable Brinell hardness tester DL/T 1845-2018 The method of testing the Diametral Hardness of high alloy steel for electrical equipment NB/T 47008-2017 Carbon steel and alloy steel forgings used in pressure equipment NB/T 47008-2010 Carbon and alloy steel forgings for pressure equipments NB/T 47010-2017 Stainless steel and heat-resistant steel forgings used in pressure equipment NB/T 47010-2010 Stainless and heat-resisting steel forgings for pressure equipments NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing" NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing