GB/T 38116-2019 Low-voltage docking connectors for removable energy storage units

GB/T 3956-2008 Conductors of insulated cables GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB 5023.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 1:General requirements GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 2:Test methods GB/T 5023.2-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 2:Test methods GB 5023.3-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 3:Non-sheathed cables for fixed wiring GB/T 5023.3-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 3:Non-sheathed cables for fixed wiring GB 5023.4-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 4:Sheathed cables for fixed wiring GB/T 5023.4-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 4:Sheathed cables for fixed wiring GB 5023.5-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 5:Flexible cables (cords) GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords) GB 5023.6-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 6:Lift cables and cables for flexible connection GB/T 5023.6-2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 6:Lift cables and cables for flexible connections GB 5023.7-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 7:Flexible cables screened and unscreened with two or more conductors GB/T 5023.7-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 7:Flexible cables screened and unscreened with two or more conductors GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test method GB/T 9797-1997 Metallic coatings—Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium GB/T 9797-2005 Metallic coatings—Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium GB/T 9797-2022 Metallic and other inorganic coatings—Electrodeposited coatings of nickel,nickel plus chromium,copper plus nickel and of copper plus nickel plus chromium GB/T 9799-1997 Metallic coatings—Electroplated coatings of zinc on iron or steel GB/T 9799-2011 Metallic and other inorganic coatings—Electroplated coatings of zinc with supplementary treatments on iron or steel GB/T 9799-2024 Metallic and other inorganic coatings—Electroplated coatings of zinc with supplementary treatments on iron or steel GB/T 11918.4-2014 Plugs,socket-outlets and couplers for industrial purposes—Part 4:Switched socket-outlets and connectors with or without interlock GB/T 11918.4-2025 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 4:Switched socket-outlets with or without interlock GB/T 12599-2002 Metallic coatings—Electroplated coatings of tin—Specification and test methods GB 13539.1-2008 Low-voltage fuses—Part 1:General requirements GB/T 13539.2-2008 Low-voltage fuses—Part 2:Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)—Examples of standardized systems of fuses A to I GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements GB 17465.2-1998 Appliance couplers for household and similar general purposes Part 2:Interconnection couplers for household and similar equipment GB/T 17465.2-2009 Appliance couplers for household and similar general purposes—Part 2:Interconnection couplers for household and similar equipment GB/T 17465.3-2008 Appliance couplers for household and similar general purposes—Part 2:Appliance couplers with a degree of protection higher than IPX0 GB 17465.4-2009 Appliance couplers for household and similar general purposes—Part 2:Couplers dependent on appliance weight for engagement GB/T 17465.4-2015 Appliance couplers for household and similar general purposes—Part 2-4:Couplers dependent on appliance weight for engagement GB/T 17465.5-2017 Appliance couplers for household and similar general purposes—Part 2-1:Sewing machine couplers GB/T 17465.6-2022 Appliance couplers for household and similar general purposes—Part 3:Standard sheets and gauges IEC 60083 IEC 60245-4:2011 GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.18-2000 Environmental testing—Part 2:Tests—Test Kb:Salt mist, cyclic (sodium chloride solution) GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution) GB/T 2423.18-2021 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution) GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature GB/T 2423.34-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test Z/AD:Composite temperature/ humidity cyclic test GB/T 2423.34-2012 Environmental testing—Part 2:Test methods—Test Z/AD:Composite temperature/humidity cyclic test GB/T 2423.34-2024 Environmental testing—Part 2:Test methods—Test Z/AD:Composite temperature/humidity cyclic test GB/T 2423.51-2000 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 2423.51-2012 Environmental testing—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 2423.51-2020 Environmental testing—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 5095.2-1997 Electromechanical components for electronic equipment Basic testing procedures and measuring methods—Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests GB/T 5465.1-2009 Graphical symbols for use on electrical equipment—Part 1:Overview and classification GB/T 11918.1-2014 Plugs,socket-outlet and couplers for industrial purposes—Part 1:General requirements GB/T 13539.1-2015 Low-voltage fuses—Part 1:General requirements GB/T 13539.2-2015 Low-voltage fuses—Part 2:Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)—Examples of standardized systems of fuses A to K GB/T 17045-2008 Protection against electric shock—Common aspects for installation and equipment GB/T 18290.2-2000 Solderless connections—Part 2:Solderless crimped connections—General requirements, test methods and practical guidance GB/T 18290.2-2015 Solderless connections—Part 2:Crimped connections—General requirements,test methods and practical guidance GB/T 18290.3-2000 Solderless connections—Part 3:Solderless accessible insulation displacement connections—General requirements, test methods and practical guidance GB/T 18290.4-2000 Solderless connections—Part 4:Solderless non-accessible insulation displacement connections—General requirements, test methods and practical guidance GB/T 18290.4-2015 Solderless connections—Part 4:Solderless non-accessible insulation displacement connections—General requirements,test methods and practical guidance GB/T 18290.5-2000 Solderless connections—Part 5:Solderless press-in connections—General requirements, test methods and practical guidance GB/T 18290.5-2015 Solderless connections—Part 5:Press-in connections—General requirements,test methods and practical guidance GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests ISO/IEC TR 29106：2007+AMD1：2012

IEC TS 63066:2017