GB/T 13633-1992
Replaced
GB/T 30951-2014
Active
National standards
GB/T 30951-2014 Scrap conditions about electrical and mechanical equipment of small-scale hydropower station
GB/T 30951-2014 Scrap conditions about electrical and mechanical equipment of small-scale hydropower station
Basic Information
Standard Code:
GB/T 30951-2014
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rotating motor
ICS Name:
Generator
Publish Date:
2014-07-08
Implement Date:
2015-01-10
Pages:
14 pages
Scope
This standard specifies the guidelines and conditions that should be followed for the scrapping of mechanical and electrical equipment in small hydropower stations.
This standard applies to the scrapping of mechanical and electrical equipment in small hydropower stations with an installed capacity of between 500 kW and 50,000 kW, and a turbine wheel diameter of less than 3.3 m.
Development Information
Referenced Standards
GB/T 6075.5-2002 Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 10585
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB 3906-1991 A.C. metal-enclosed switchgear for rated voltages of 3~35kV
GB/T 3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
GB/T 3906-2020 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
GB/T 5972-1986 Wire rope for lifting appliances—Code of practice for examination and discard
GB/T 5972-2006 Wire ropes for cranes—Code of practice for examination and discard
GB/T 5972-2009 Cranes—Wire ropes—Care,maintenance,installation,examination and discard
GB/T 5972-2016 Cranes—Wire ropes—Care and maintenance,inspection and discard
GB/T 5972-2023 Cranes—Wire ropes—Care and maintenance,inspection and discard
GB/T 6067.1-2010 Safety rules for lifting appliances—Part 1:General
GB 6245-1998 Performance requirements and test methods for fire pumps
GB 6245-2006 Fire pumps
GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7894-2001 Fundamental technical specifications for hydro generators
GB/T 7894-2009 Fundamental technical specifications for hydro generators
GB/T 7894-2023 Fundamental technical requirements for hydrogenerators
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB/T 9652.1-1997 Specifications of governors and pressure oil supply units for hydraulic turbines
GB/T 9652.1-2007 Specifications of control systems for hydraulic turbines
GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
GB/T 10969-1996 Specifications for water passage components of hydraulic turbines
GB/T 10969-2008 Specification for water passage components of hydraulic turbines,storage pumps and pump-turbines
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 11022-2011 Common specifications for high-voltage switchgear and controlgear standards
GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards
GB/T 11805-1999 Basic specifications of automatic control components(devices) and their related system for hydroturbine-generating sets
GB/T 11805-2008 Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets
GB/T 11805-2019 General specifications of automatic control components(devices)and their related system for hydroturbine-generating sets
GB/T 14478-1993 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 14478-2012 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15468-2006 Fundamental technical requirements for hydraulic turbines
GB/T 15468-2020 Fundamental technical requirements for hydraulic turbines
GB/T 15469.1-2008 Hydraulic turbines,storage pumps and pump-turbines—Cavitation pitting evaluation—Part 1:Cavitation pitting evaluation in reaction turbines
GB/T 15469.2-2007 Hydraulic turbines, storage pumps and pump-turbines—Cavitation pitting evaluation—Part 2:Cavitation pitting evaluation in storage pumps and pump-turbines
GB/T 21717-2008 Technical specification about the type parameter and performance of small hydraulic turbines
GA 503-2004 Testing code for fire protection systems
GB 50150-2016 Electric equipment installation engineering - standard for hand-over test of electric equipment
DL/T 596-1996 Electric equipment preventive testing regulations
GB/T 14478-2025 Basic technical specification of inlet valves for large and medium-sized hydraulic turbines
GB 50184-2011 Code for acceptance of construction quality of industrial metallic piping
Related Standards
GB/T 1029-1993
Replaced
GB/T 1029-1993 Test procedures for three-phase synchronous machines
GB/T 4997-1993
Replaced
GB/T 4997-1993 Permanent magnet low speed direct current tachogenerator, General specification for
GB/T 7408-1994
Replaced
GB/T 7408-1994 Data elements and interchange formats—Information interchange—Representation of dates and times
GB/T 15548-1995
Replaced
GB/T 15548-1995 General specification for three-phase synchronous generator driven by reciprocating internal combustion engine
GB/T 7409.1-1997
Replaced