DZ/T 0101.12-1994
Active
MT 397-1995
Active
Industry standards-Coal
MT 397-1995 Mine simulation board general technical specification
MT 397-1995 Mine simulation board general technical specification
Basic Information
Standard Code:
MT 397-1995
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Special equipment and supplies for coal mines
ICS Name:
-
Publish Date:
1995-08-22
Implement Date:
1995-11-01
Pages:
12 pages
Development Information
Referenced Standards
GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance
GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB/T 4942.2-1993 Degrees of protection provided by enclosures for low-voltage apparatus
GB/T 5080.1-1986 Equipment reliability testing—General requirements
GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles
GB/T 5080.2-1986 Equipment reliability testing—Guidance for the design of test cycles
GB/T 5080.2-2012 Reliability testing—Part 2:Design of test cycles
GB/T 5080.4-1985 Equipment reliability testing—Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution)
GB/T 5080.5-1985 Equipment reliability testing—compliance test plans for success ratio
GB/T 5080.6-1996 Equipment reliability testing—Tests for the validity of a constant failure rate assumption
GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6388-1986 Transport package shipping mark
GB/T 12173-1990 Mining electrical apparatus for non hazardous area
GB/T 12173-2008 Mining electrical apparatus for non hazardous area
ZB D90 001
ZB D90 002
ZB D90 003
ZB D90 004
ZB D90 005
ZB D90 006
ZB D90 007
MTJ 1
MT 34
MT 209-1990 The general technical requirements for electrical products used in coal mine communication, detection, and control
MT 210-1990 The basic test methods for electrical products used in coal mine communication, detection, and control
MT 211-1990 Quality Inspection Rules for Electrical and Electronic Products Used in Mine Communication, Detection, and Control
MT 286-1992 The method for preparing model numbers and management methods for coal mine communication and automation products
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
\nDZ 4-1981 Method for Compiling Product Models of Geological Instrumentation Equipment
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active