T/CNFAGS 10-2024
Active
Group standards
T/CNFAGS 10-2024 Double Pressurized Acid Blending Process using Tetra-Mix Unit for Strong Nitric Acid Specification Manual
T/CNFAGS 10-2024 Double Pressurized Acid Blending Process using Tetra-Mix Unit for Strong Nitric Acid Specification Manual
Price:
$ 43.00
Basic Information
Standard Code:
T/CNFAGS 10-2024
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Chemical machinery and equipment
ICS Name:
Comprehensive Chemical Equipment
Publish Date:
2024-03-15
Implement Date:
2024-05-01
Pages:
24 pages
Scope
This document defines the terms and definitions of the nitric acid four-in-one unit used in the double-pressure nitric acid process, and stipulates the basic requirements, equipment requirements, auxiliary systems, kinetics, inspection, testing, control systems, noise, and equipment maintenance. This document is applicable to nitric acid four-in-one units used in the double-pressure nitric acid process with an annual output of 100,000 tons or more (including air compressors, nitrogen oxide compressors, exhaust gas turbo-expander machines, and steam turbines). Other nitric acid process four-in-one units can refer to and implement this document accordingly.
Development Information
Referenced Standards
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4830-1984 Pressure range and quality of air supply for the industrial process measurement and control instruments
GB/T 4830-2015 Industrial process measurement and control instruments—Pressure range and quality of air supply
GB/T 8542-1987 Specification for turbine gearings
GB/T 8542-2023 High speed gear units technical specifications
GB/T 13927-1992 Pressure testing for general purpose valves
GB/T 13927-2008 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles
GB/T 21109.1-2007 Functional safety—Safety instrumented systems for the process industry sector—Part 1:Framework,definitions,system,hardware and software requirements
GB/T 21109.1-2022 Functional safety of safety instrumented systems in the process industry sector—Part 1:Framework,definitions,system,hardware and application programming requirements
GB/T 26137-2010 Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander
GB/T 28574-2012 Petroleum,petrochemical and natural gas industries steam turbines—Special-purpose applications
GB/T 29542-2013 Industrial off-gas energy recovery turbine expander
GB/T 42601.1-2023 Petroleum,petrochemical and natural gas industries—Lubrication,shaft-sealing and control-oil systems and auxiliaries—Part 1:General requirements
GB/T 42601.3-2023 Petroleum,petrochemical and natural gas industries—Lubrication,shaft-sealing and control-oil systems and auxiliaries—Part 3:General-purpose oil systems
GB/T 50087-2013 Specifications for the design of noise control system in industrial enterprises
HJ 2034-2013 Environmental Noise and Vibration Control Engineering Technical Guidelines
JB/T 1267-2014 50MW~200MW turbine generator rotor forging technical specifications
JB/T 1267-2002 50MW~200MW steam turbine generator rotor forgings technical specifications
JB/T 3165-1999 The thermal performance tests of centrifugal and axial flow fans and compressors
JB/T 4359-2014 General-purpose axial flow compressor
JB/T 4359-1994 General-purpose axial flow compressor
JB/T 6443.1-2006 Axial and centrifugal compressors and expansion machines for use in the petroleum, chemical, and gas industries - Part 1: General requirements
JB/T 6443.2-2006 Petroleum, chemical, and gas industry-type axial flow, centrifugal compressor and expansion machine - Compressors Part 2: Centrifugal and axial type compressors
API STD 671
Related Standards
GB/T 25146-2010
Active
GB/T 25147-2010
Active
GB/T 25147-2010 Test method of metal corrosion amount and corrosion rate of chemical cleaning for industrial equipment—Gravimetric method
GB/T 25148-2010
Active
GB/T 25148-2010 Test methods of scale removal rate and detergence rate of chemical cleaning for industrial equipment
GB/T 25149-2010
Active
GB/T 25149-2010 Quality test method of passive film on carbon steel of chemical cleaning for industrial equipment—Red dot method
GB/T 25150-2010
Active
GB/T 25150-2010 Quality test method of passive film on austenitic stainless steel of chemical cleaning for industrial equipment—Blue dot method
GB/T 39801-2021
Active