GB/T 10054.1-2021 Active National standards

GB/T 10054.1-2021 Builders' hoists for goods—Part 1:Hoists with accessible platforms

GB/T 10054.1-2021 Builders' hoists for goods—Part 1:Hoists with accessible platforms

Publish Date: 2021-08-20 Implement Date: 2022-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 140
Download

Basic Information

Standard Code: GB/T 10054.1-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Cranes
ICS Name: Other lifting equipment
Publish Date: 2021-08-20
Implement Date: 2022-03-01
Pages: 49 pages

Scope

This part of GB/T 10054 specifies the safety and technical requirements for the manufacture, installation, use, and maintenance of freight construction elevators (hereinafter referred to as elevators) that can be accessed by a carrying device. This part applies to power-driven, temporarily installed elevators used by construction site personnel, equipped with a carrying device, capable of stopping at various floors, and having the following characteristics: - Used solely for transporting goods; - The carrying device has a guide; - The carrying device operates vertically or along a guide rail with a maximum angle of not more than 15° to the vertical plane; - The carrying device is suspended or supported by a wire rope driven by a drum, or by chains, gear racks, hydraulic cylinders (directly or indirectly), or telescopic linkage mechanisms; - When the guide rail frame is erected, it may or may not require support from an independent structure; - Trained personnel are allowed to enter the carrying device during loading and unloading; - The carrying device is operated by designated personnel; - Authorized professionals are allowed to enter and operate the carrying device during installation, dismantling, maintenance, and inspection, if necessary. This part covers the installation of the elevator, including the installation of the base frame and ground protective fences, but does not include the design of the elevator's foundation made of concrete, gravel, wood, etc. It includes the design of wall-mounted frames, but does not include the design of anchoring bolts connected to the supporting structure. It includes the design of floor doors and their structures, but does not include the design of any anchoring bolts connected to the supporting structure. Chapter 4 of this part lists various hazards that may occur at various stages of the elevator's service life and provides methods to eliminate or reduce these hazards when used in accordance with the

Development Information

Word Count: 97 Thousand words Pages: 49 pages

Replace the following standards

GB/T 10054.1-2014

Referenced Standards

GB/T 3811-2008 Design rules for cranes GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 7588-2003 Safety rules for the construction and installation of electric lifts GB/T 14048.5-2017 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devices and switching element—Electromechanical control circuit devices GB/T 15706-2012 Safety of machinery—General principles for design—Risk assessment and risk reduction GB/T 16754-2008 Safety of machinery—Emergency stop—Principles for design GB 21240-2007 Safety rules for the construction and installation of hydraulic lifts GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs ISO 6336-1 ISO 6336-2 ISO 6336-3 ISO 9355-1 GB/T 3480.5-2008 Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials GB/T 3480.5-2021 Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials GB/T 3766-2001 Hydraulic fluid power—General rules relating to systems GB/T 3766-2015 Hydraulic fluid power—General rules and safety requirements for systems and their components GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 5226.32-2017 Electrical safety of machinery—Electrical equipment of machines—Part 32:Requirements for hoisting machines GB/T 5972-1986 Wire rope for lifting appliances—Code of practice for examination and discard GB/T 5972-2006 Wire ropes for cranes—Code of practice for examination and discard GB/T 5972-2009 Cranes—Wire ropes—Care,maintenance,installation,examination and discard GB/T 5972-2016 Cranes—Wire ropes—Care and maintenance,inspection and discard GB/T 5972-2023 Cranes—Wire ropes—Care and maintenance,inspection and discard GB/T 12265.3-1997 Safety of machinery—Minimum gaps to avoid crushing of parts of the human body GB 14048.4-2003 Low-voltage switchgear and controlgear—Electromechanical contactors and motor-starters GB/T 14048.4-2010 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB/T 14574-2000 Acoustics—Declaration and verification of noise emission values of machinery and equipment GB/T 18831-2002 Safety of machinery—Interlocking devices associated with guards—Principles for design and selection GB/T 18831-2010 Safety of machinery—Interlocking devices associated with guards—Principles for design and selection GB/T 18831-2017 Safety of machinery—Interlocking devices associated with guards—Principles for design and selection GB/T 19670-2005 Safety of machinery—Prevention of unexpected start-up GB/T 19670-2023 Safety of machinery—Prevention of unexpected start-up GB/T 20118-2006 Steel wire ropes for general purpose GB/T 20118-2017 Steel wire ropes for general purposes GB/T 20118-2025 General technical requirements for steel wire ropes

Related Standards

Contact Us