GB/T 14627-1993
Replaced
GB/T 18110-2016
Active
National standards
GB/T 18110-2016 Electromechanical equipment guide for small hydroelectric installations
GB/T 18110-2016 Electromechanical equipment guide for small hydroelectric installations
Basic Information
Standard Code:
GB/T 18110-2016
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Hydropower projects
ICS Name:
Hydraulic engineering
Publish Date:
2016-06-14
Implement Date:
2017-01-01
Pages:
44 pages
Scope
This standard specifies the operating conditions, technical requirements, and inspection, delivery, installation, operation, and maintenance requirements for the mechanical and electrical equipment of small hydropower stations. This standard applies to the mechanical and electrical equipment of hydropower stations with an installed capacity of 50 MW or less. This standard only concerns the technical relationship between the supplier and the buyer regarding the mechanical and electrical equipment, and does not involve civil engineering, administrative affairs, or business matters.
Development Information
Replace the following standards
Referenced Standards
GB 1094.1-1996 Power transformers—Part 1:General
GB/T 1094.1-2013 Power transformers—Part 1:General
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB 1208-1997 Current transformers
GB 1208-2006 Current transformers
GB 1984-2003 High-voltage alternating-current circuit-breakers
GB/T 1984-2014 High-voltage alternating-current circuit-breakers
GB/T 1984-2024 High-voltage alternating-current circuit-breakers
GB 1985-2004 High-voltage alternating-current disconnectors and earthing switches
GB/T 1985-2014 High-voltage alternating-current disconnectors and earthing switches
GB/T 1985-2023 High-voltage alternating current disconnectors and earthing switches
GB/T 7894-2001 Fundamental technical specifications for hydro generators
GB/T 7894-2009 Fundamental technical specifications for hydro generators
GB/T 7894-2023 Fundamental technical requirements for hydrogenerators
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB/T 9652.1-1997 Specifications of governors and pressure oil supply units for hydraulic turbines
GB/T 9652.1-2007 Specifications of control systems for hydraulic turbines
GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
GB 11032-2000 Metal oxide surge arresters without gaps for a.c.systems
GB/T 11032-2010 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 11032-2020 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 14478-1993 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 14478-2012 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15468-2006 Fundamental technical requirements for hydraulic turbines
GB/T 15468-2020 Fundamental technical requirements for hydraulic turbines
GB/T 15469.1-2008 Hydraulic turbines,storage pumps and pump-turbines—Cavitation pitting evaluation—Part 1:Cavitation pitting evaluation in reaction turbines
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 15613-2023 Hydraulic turbines,storage pumps and pump-turbines model acceptance tests
GB/T 15613.1-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines—Part 1:General rules
GB/T 15613.2-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines—Part 2:Main hydraulic performance test
GB/T 15613.3-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines Part 3:Additional performance test
GB/T 20840.3-2013 Instrument transformers—Part 3:Additional requirements for inductive voltage transformers
GB/T 21717-2008 Technical specification about the type parameter and performance of small hydraulic turbines
GB/T 21718-2008 Fundamental technical requirements for small hydraulic turbines
GB/T 21718-2021 Fundamental technical requirements for small hydraulic turbines
GB/T 27989-2011 Fundamental technical requirements for small hydraulic generators
DL/T 507-2014 DL/T 507-2014 Guidelines for Startup Test of Hydropower Generator Sets
JB/T 6752-2013 Standard Procedures for Static Balance Test of Small and Medium Size Water Turbine Wheel
DL/T 507-2002 DL/T 507-2002 Specification for Start-up Test of Hydropower Generator Sets
JB/T 6752-1993 JB/T 6752-1993 Standard for Static Balance Test of Small and Medium Size Water Turbine Wheel
GB 50227-2017 Code for design of installation of shunt capacitors
GB/T 14478-2025 Basic technical specification of inlet valves for large and medium-sized hydraulic turbines
Adopt standards
IEC 61116:1992
Related Standards
GB/T 15468-1995
Replaced
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15469-1995
Replaced
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15613-1995
Replaced
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 16166-1996
Replaced
GB/T 16166-1996 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
GB/T 10969-1996
Replaced