T/SHPTA 047-2023
Active
Group standards
T/SHPTA 047-2023 Specialty plastic for modified acrylonitrile-butadiene-styrene (ABS) copolymer and its alloys
T/SHPTA 047-2023 Specialty plastic for modified acrylonitrile-butadiene-styrene (ABS) copolymer and its alloys
Price:
$ 24.00
Basic Information
Standard Code:
T/SHPTA 047-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Synthetic resins and plastics
ICS Name:
Rubber synthetic ingredients
Publish Date:
2023-08-03
Implement Date:
2023-09-03
Pages:
12 pages
Scope
This document specifies the classification and naming, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of modified acrylonitrile-butadiene-styrene copolymer (ABS) and its alloy materials for electrical appliances.
This document is applicable to modified ABS and its alloy materials made from one or more resins such as ABS and its alloys, with the addition of relevant additives, which are produced by melt blending and extrusion and are mainly used for electrical appliance shells, internal parts, and functional parts (excluding electrical appliance components that come into contact with food).
Development Information
Referenced Standards
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1043.1-2008 Plastics—Determination of charpy impact properties—Part 1:Non-instrumented impact test
GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite
GB/T 1844.1-1995 Symbols of plastics and resins—Part 1:Basic polymers and their special characteristics
GB/T 1844.1-2008 Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
GB/T 1844.1-2022 Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
GB/T 2408-1996 Plastics—Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 2547-1981 Plastic resins—Sampling
GB/T 2547-2008 Plastic resins—Sampling
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 5169.12-1999 Fire hazard testing for electric and electronic products—Test methods-Glow-wire flammability test on materials
GB/T 5169.12-2006 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability test method for materials
GB/T 5169.12-2013 Fire hazard testing for electric and electronic products—Part 12: Glowing/hot-wire based test methods—Glow-wire flammability index(GWFI) test method for materials
GB/T 5169.12-2024 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability index (GWFI) test method for materials
GB/T 9341-2000 Plastics—Determination of flexural properties
GB/T 9341-2008 Plastics—Determination of flexural properties
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials—Part 1:General principles and moulding of multipurpose and bar test specimens
GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles,and moulding of multipurpose and bar test specimens
GB/T 26572-2011 Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 39560.1-2020 Determination of certain substances in electrical and electronic products—Part 1:Introduction and overview
GB/T 39560.2-2020 Determination of certain substances in electrical and electronic products—Part 2:Disassembly,disjointment and mechanical sample preparation
GB/T 39560.2-2024 Determination of certain substances in electrical and electronic products—Part 2:Disassembly,disjointment and mechanical sample preparation
GB/T 39560.4-2021 Determination of certain substances in electrical and electronic products—Part 4:Mercury in polymers,metals and electronics by CV-AAS,CV-AFS,ICP-OES and ICP-MS
GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5:Cadmium,lead and chromium in polymers and electronics and cadmium and lead in metals by AAS,AFS,ICP-OES and ICP-MS
GB/T 39560.6-2020 Determination of certain substances in electrical and electronic products—Part 6:Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.8-2021 Determination of certain substances in electrical and electronic products—Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS)
GB/T 39560.9-2024 Determination of certain substances in electrical and electronic products—Part 9:Hexabromocyclododecane in polymers by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.10-2024 Determination of certain substances in electrical and electronic products—Part 10:Polycyclic aromatic hydrocarbons(PAHs) in polymers and electronics by gas chromatography-mass spectrometry(GC-MS)
GB/T 39560.12-2024 Determination of certain substances in electrotechnical products—Part 12:Simultaneous determination of polybrominated biphenyls,polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry
GB/T 39560.301-2020 Determination of certain substances in electrical and electronic products—Part 3-1:Screening lead,mercury,cadmium,total chromium and total bromine by X-ray fluorescence spectrometry
GB/T 39560.302-2024 Determination of certain substances in electrical and electronic products—Part 3-2:Screening fluorine,chlorine and bromine in polymer and electronics by combustion-ion chromatography(C-IC)
GB/T 39560.303-2024 Determination of certain substances in electrical and electronic products—Part 3-3:Screening polybrominated biphenyls,polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory(Py/TD-GC-MS)
GB/T 39560.701-2020 Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium[Cr(VI)]in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
GB/T 39560.702-2021 Determination of certain substances in electrical and electroinic products—Part 7-2:Hexavalent chrome—Determination of hexavalent chrome[Cr(Ⅵ)]in polymers and electronics by the colormetric method
SH/T 1541.1-2019 Plastic particle appearance test method - Part 1: Visual method
Related Standards
GB/T 11409.4-1989
Replaced
GB/T 11409.5-1989
Replaced
GB/T 11409.5-1989 Test method of residue on sieve for rubber antiagers and vulcanizing accelerators
GB/T 11409.7-1989
Replaced
GB/T 11409.7-1989 Test method of ash for rubber antiagers and vulcanizing accelerators
GB/T 11409.8-1989
Replaced
GB/T 11409.8-1989 Test method of viscosity for rubber antiagers and vulcanizing accelerators—Rotational viscometer method
GB/T 12827-1991
Replaced
GB/T 12827-1991 Standard reference acetylene black and standard practice for evaluation
GB/T 13021-1991
Replaced