GB 16774-1997
Replaced
SH/T 3175-2013
Active
Industry standards-Petrochemical industry
SH/T 3175-2013 Design specification for storage and conveying of solid industrial sulfur
SH/T 3175-2013 Design specification for storage and conveying of solid industrial sulfur
Price:
$ 30
Basic Information
Standard Code:
SH/T 3175-2013
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Petrochemical and chemical engineering
ICS Name:
Fluid storage device
Publish Date:
2013-10-17
Implement Date:
2014-03-01
Pages:
30 pages
Scope
This standard specifies the technical requirements for the design of solid industrial sulfur storage and transportation projects. This standard applies to the design of sulfur storage and transportation projects in enterprises that produce solid industrial sulfur and use solid industrial sulfur as a raw material. It does not apply to the design of projects for the storage and transportation of powdered sulfur.
Development Information
Referenced Standards
GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification
GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas
GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines)
GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance
GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB 50016-2006
GB 50034-2013 Standard for lighting design of buildings
GB/T 50046-2018 Code for anticorrosion design of industrial constructions
GB 50052-2009 Code for design electric power supply systems
GB 50057-2010 Code for design protection of structures against lightning
GB 50058-2014 Code for design of electrical installations in explosive atmospheres
GB 50084-2001 Code of design for sprinkler systems
GB 50084-2017 Code for design of sprinkler systems
GB 50160-2008 Fire prevention code of petrochemical enterprise design
GB 50431-2020 Code for design of belt conveyor engineering
GB/T 15605-1995 Guide for venting of dust explosions
GB/T 15605-2008 Guide for pressure venting of dust explosions
GB 15605-2024 Specifications for pressure venting of dust explosion
GBZ 1
GBZ 2
JJG 648-1996 Discontinuous Totalizing Automatic Weighing Instruments(Totalizing Hopper Weighers)
JJG 648-2017 Discontinuous Totalizing Automatic Weighing Instruments(Totalizing Hopper Weighers)
JTJ B01
SH/T 3017
Related Standards
GB/T 16775-1997
Replaced
GB/T 16775-1997 Test methods for leak rate of cryogenic containers
GB/T 18443.1-2001
Replaced
GB/T 18443.1-2001 Testing method of cryo-insulation pressure vessels—Volume measurement
GB/T 18443.1-2010
Active
GB/T 18443.1-2010 Testing method of performance for vacuum insulation cryogenic equipment—Part 1:Basic requirements
GB/T 18443.2-2010
Active
GB/T 18443.2-2010 Testing method of performance for vacuum insulation cryogenic equipment—Part 2:Vacuum degree measurement
GB/T 18443.3-2010
Active