MT 644-1997
Active
MT/T 1277-2025
Active
Industry standards-Coal
MT/T 1277-2025 Mechanical and electronic equipment vibration state transducer for mine
MT/T 1277-2025 Mechanical and electronic equipment vibration state transducer for mine
Basic Information
Standard Code:
MT/T 1277-2025
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Special equipment and supplies for coal mines
ICS Name:
Other mining equipment
Publish Date:
2025-06-30
Implement Date:
2025-12-30
Publisher:
国家能源局
Technical Committee:
煤炭行业煤矿专用设备标准化技术委员会
Pages:
20 pages
Scope
本文件规定了矿用机电设备振动状态传感器的产品分类、技术要求、试验方法、检验规则以及标志、包装、运输及贮存。
本文件适用于矿用机电设备振动状态传感器(以下简称“传感器”)的设计与检验。
Development Information
Drafting Units:
天地(常州)自动化股份有限公司、中煤科工集团常州研究院有限公司、安标国家矿用产品安全标志中心有限公司、南京北路智控科技股份有限公司、江苏三恒科技股份有限公司、扬州熙源电子科技有限公司
Drafting Persons:
吴文彤、杨嘉如、王小松、罗曦、褚卫忠、梁宏、赵可可、吴钰晶、李臻、王坤、张吉哲、孙军、於帆、高仁祥
Referenced Standards
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines)
GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance
GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 10111-1988 Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 12173-1990 Mining electrical apparatus for non hazardous area
GB/T 12173-2008 Mining electrical apparatus for non hazardous area
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
MT 209-1990 The general technical requirements for electrical products used in coal mine communication, detection, and control
MT 210-1990 The basic test methods for electrical products used in coal mine communication, detection, and control
MT 286-1992 The method for preparing model numbers and management methods for coal mine communication and automation products
MT/T 899-2000 Information transmission device for coal mine
Related Standards
MT 646-1997
Abolished
MT 646-1997 Frictional metal prop
MT 668-1997
Replaced
MT 668-1997 Technical Conditions for Flame-Retardant Steel-Mesh-Core Conveying Belt for Coal Mines
MT 669-1997
Active
MT 669-1997 Technical condition of fire-resistant steel-cable conveyor-belt in coal mining
MT/T 154.7-1997
Active
MT/T 154.7-1997 Model designation of separating equipment for coal
MT/T 660-1997
Active