GB 3883.10-1991
Replaced
GB/T 3883.210-2019
Active
National standards
GB/T 3883.210-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 210:Particular requirements for hand-held planers
GB/T 3883.210-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 210:Particular requirements for hand-held planers
Basic Information
Standard Code:
GB/T 3883.210-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Electric tools
Publish Date:
2019-10-18
Implement Date:
2020-05-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国电动工具标准化技术委员会(SAC/TC 68)
Pages:
20 pages
Scope
GB 3883的本部分涉及电动机或电磁铁驱动的:
——手持式电动工具(第2部分);
——可移式电动工具(第3部分);
——园林工具(第4部分)。
以下简称“工具”。
交流单相或直流工具的额定电压不大于250V,交流三相工具的额定电压不大于440V。最大额定输入功率不超过3700W。
本部分涉及人们在正常操作以及合理可预见的使用工具时遇到的由工具引发的危险。
带电加热元件的工具属本部分范围。这些加热元件的要求在GB4706的相关部分中规定。
对于不与电网隔离、且基本绝缘由不按工具额定电压设计的电动机,其要求在附录B中规定。对于由可充电电池供电的电动机驱动或电磁铁驱动的工具以及用于这些工具的电池包,其要求在附录K中规定。对于能直接接在市电或非隔离电源上操作和/或充电的这类工具,其要求在附录L中规定。
不用对工具自身作任何改造便能够安装到一个支架或工作台当作固定式工具使用的手持式电动工具属于本部分范围,由第3部分来规定。
本部分不适用于:
——在爆炸性环境(尘埃、蒸汽或气体)中使用的工具;
——制备和加工食品用工具;
——医疗用工具;
增加:
本部分适用于电刨。
Development Information
Drafting Units:
江苏东成电动工具有限公司、上海电动工具研究所(集团)有限公司、浙江亚特电器有限公司、浙江信源电器制造有限公司、锐奇控股股份有限公司
Drafting Persons:
施春磊、顾菁、丁俊峰、金红霞、朱贤波、陈勤、张国峰、姚同锁、袁元
Same series standard
GB/T 3883.202-2019 Safety of motor-operated hand-held, transportable and garden tools—Part 202:Particular requirements for hand-held screwdrivers and impact wrenches
GB/T 3883.204-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 204:Particular requirements for hand-held sanders and polishers other than disc type
GB/T 3883.205-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 205:Particular requirements for hand-held circular saws
GB/T 3883.311-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 311:Particular requirements for transportable cut-off machines
Replace the following standards
Referenced Standards
GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB/T 1406.1-2008 Types and dimensions of lamp caps—Part 1:Screw caps
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements
GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB 2099.2-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB/T 2099.2-2012 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB 2099.3-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirement for adaptors
GB 2099.3-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for adaptors
GB/T 2099.3-2015 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.4-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
GB/T 2099.5-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
GB/T 2099.6-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for fused plugs
GB/T 2099.7-2015 Plugs and socket-outlets for household and similar purposes—Part 2-7:Particular requirements for cord extension sets
GB 2099.7-2024 Cord extension socket-outlets for household and similar purposes—Safety technical specification
GB/T 2099.8-2017 Plugs and socket-outlets for household and similar purposes—Part 2-4:Particular requirements for plugs and socket-outlets for SELV
GB/T 2099.9-2017 Plugs and socket-outlets for household and similar purposes—Part 2-9:Particular requirements for socket-outlets for information
GB/T 2099.10-2026 Plugs and socket-outlets for household and similar purposes—Part 10:Particular requirements for plugs and socket-outlets applicable to Hong Kong special administrative region
GB/T 2099.31-2025 Plugs and socket-outlets for household and similar purposes—Part 31:Particular requirements for socket-outlets incorporating USB power supply
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels
GB/T 2893.3-2010 Graphical symbols—Safety colours and safety signs—Part 3:Design principles for graphical symbols for use in safety signs
GB 3667-1997 A.C. motor capacitors
GB/T 3667.1-2005 AC motor capacitors—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation
GB/T 3667.1-2016 AC motor capacitors—Part 1:General—Performance,testing and rating—Safety requirements—Guide for installation and operation
GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors
GB/T 3667.2-2016 AC motor capacitors—Part 2:Motor start capacitors
GB/T 3956-2008 Conductors of insulated cables
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements
GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods
GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB 7247.1-2012 Safety of laser products—Part 1:Equipment classification and requirements
GB/T 8332-2008 Test method for flammability of cellular plastic—Horizonal burning method
GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements
GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links
Adopt standards
IEC 62841-2-14:2015
Related Standards
GB 3883.12-1991
Replaced
GB 3883.12-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for concrete vibrators (internal vibrators)
GB 3883.3-1991
Replaced
GB 3883.3-1991 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for electric grinders, polishers and disk-type sanders
GB 3883.6-1991
Replaced
GB 3883.6-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for electric drills
GB 13960-1992
Replaced
GB 13960-1992 Safety of transportable motor-operated electric tools—Part 1:General requirements
GB/T 13956-1992
Abolished