GB/T 3883.205-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 205:Particular requirements for hand-held circular saws

GB/T 3883.202-2019 Safety of motor-operated hand-held, transportable and garden tools—Part 202:Particular requirements for hand-held screwdrivers and impact wrenches GB/T 3883.204-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 204:Particular requirements for hand-held sanders and polishers other than disc type GB/T 3883.210-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 210:Particular requirements for hand-held planers GB/T 3883.311-2019 Safety of motor-operated hand-held,transportable and garden tools—Part 311:Particular requirements for transportable cut-off machines

GB/T 3883.5-2007 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for circular saws

GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions GB/T 1406.1-2008 Types and dimensions of lamp caps—Part 1:Screw caps GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements GB 2099.2-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances GB/T 2099.2-2012 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances GB 2099.3-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirement for adaptors GB 2099.3-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for adaptors GB/T 2099.3-2015 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors GB/T 2099.4-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations GB/T 2099.5-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations GB/T 2099.6-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for fused plugs GB/T 2099.7-2015 Plugs and socket-outlets for household and similar purposes—Part 2-7:Particular requirements for cord extension sets GB 2099.7-2024 Cord extension socket-outlets for household and similar purposes—Safety technical specification GB/T 2099.8-2017 Plugs and socket-outlets for household and similar purposes—Part 2-4:Particular requirements for plugs and socket-outlets for SELV GB/T 2099.9-2017 Plugs and socket-outlets for household and similar purposes—Part 2-9:Particular requirements for socket-outlets for information GB/T 2099.10-2026 Plugs and socket-outlets for household and similar purposes—Part 10:Particular requirements for plugs and socket-outlets applicable to Hong Kong special administrative region GB/T 2099.31-2025 Plugs and socket-outlets for household and similar purposes—Part 31:Particular requirements for socket-outlets incorporating USB power supply GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels GB/T 2893.3-2010 Graphical symbols—Safety colours and safety signs—Part 3:Design principles for graphical symbols for use in safety signs GB 3667-1997 A.C. motor capacitors GB/T 3667.1-2005 AC motor capacitors—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation GB/T 3667.1-2016 AC motor capacitors—Part 1:General—Performance,testing and rating—Safety requirements—Guide for installation and operation GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors GB/T 3667.2-2016 AC motor capacitors—Part 2:Motor start capacitors GB/T 3956-2008 Conductors of insulated cables GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords) GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method GB 7247.1-2012 Safety of laser products—Part 1:Equipment classification and requirements GB/T 8332-2008 Test method for flammability of cellular plastic—Horizonal burning method GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links GB/T 9364.3-2018 Miniature fuses—Part 3:Sub-miniature fuse-links GB 9364.4-2006 Miniature fuses—Part 4:Universal modular fuse-links (UMF) GB/T 9364.4-2016 Miniature fuses—Part 4:Universal modular fuse-links (UMF)—Through-hole and surface mount types GB/T 9364.5-2011 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links GB/T 9364.5-2025 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links GB/T 9364.6-2001 Miniature fuses—Part 6:Fuse-holders for miniature cartridge fuse-links GB/T 9364.6-2023 Miniature fuses—Part 6:Fuse-holders for miniature fuse-links GB/T 9364.7-2016 Miniature fuses—Part 7:Miniature fuse-links for special applications GB/T 9364.8-2023 Miniature fuses—Part 8:Fuse resistors with particular overcurrent protection GB/T 9364.10-2013 Miniature fuses—Part 10:User guide for miniature fuses GB/T 9364.11-2016 Miniature fuses—Part 11:Fuse-links for LED lamps GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation GB/T 11918-2001 Plugs, socket-outlets and couplers for industrial purposes—Part 1:General requirements GB/T 11919-2001 Plugs, socket-outlets and couplers for industrial purposes—Part 2:Dimensional interchangeability requirements for pin and contact-tube accessories GB/T 12113-2003 Methods of measurement of touch current and protective conductor current GB/T 13140.2-2008 Connecting devices for low-voltage circuits for household and similar purposes—Part 2:Particular requirements for connecting devices as separate entities with screw-type clamping units GB/T 13140.3-2008 Connecting devices for low-voltage circuitsfor household and similar purposes—Part 2:Particular requirements for connecting devices as separate entities with screwless-type clamping units GB/T 14472-1998 Fixed capacitors for use in electronic equipment—Part 14:Sectional specification:Fixed capacitors for electromagnetic interference suppression and connection to the supply mains GB/T 14536.1-2008 Automatic electrical controls for household and similar use—Part 1:General requirements GB/T 15092.1-2010 Switches for appliances—Part 1:General requirements GB/T 16273.1-2008 Graphical symbols for use on equipment—Part 1:Common symbols GB/T 16754-2008 Safety of machinery—Emergency stop—Principles for design GB/T 16842-2008 Protection of persons and equipment by enclosures—Probe for verification GB/T 16855.1-2008 Safety of machinery—Safety-related parts of control systems—Part 1:General principles for design GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution GB/T 16935.3-2016 Insulation coordination for equipment within low-voltage systems— Part 3:Use of coating,potting or moulding for protection against pollution GB/T 16935.3-2025 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution GB/T 17196-1997 Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements GB/T 17464-2012 Connecting devices—Electrical copper conductors—Safety requirements for screw-type and screwless-type clamping units—General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2(included) GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements GB 17465.2-1998 Appliance couplers for household and similar general purposes Part 2:Interconnection couplers for household and similar equipment GB/T 17465.2-2009 Appliance couplers for household and similar general purposes—Part 2:Interconnection couplers for household and similar equipment GB/T 17465.3-2008 Appliance couplers for household and similar general purposes—Part 2:Appliance couplers with a degree of protection higher than IPX0 GB 17465.4-2009 Appliance couplers for household and similar general purposes—Part 2:Couplers dependent on appliance weight for engagement GB/T 17465.4-2015 Appliance couplers for household and similar general purposes—Part 2-4:Couplers dependent on appliance weight for engagement GB/T 17465.5-2017 Appliance couplers for household and similar general purposes—Part 2-1:Sewing machine couplers GB/T 17465.6-2022 Appliance couplers for household and similar general purposes—Part 3:Standard sheets and gauges GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB 19212.1-2008 Safety of power transformers,power supplies,reactors and similar products—Part 1:General requirements and tests GB/T 19212.5-2011 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V—Part 5:Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers GB/T 19212.7-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V—Part 7:Particular requirements and test for safety isolating transformers and power supply units incorporating safety isolating transformers GB 19212.18-2006 Safety of power transformers, power supply units and similar—Part 18:Particular requirements for transformers for switch mode power supplies GB/T 19639.1-2005 Technical conditions of small-sized valve-regulated lead-acid batteries GB/T 19639.1-2014 General purpose valve-regulated lead-acid batteries—Part 1:Technical conditions GB 20044-2005 Electrical accessories—Portable residual current devices without integral overcurrent protection for household and similar use(PRCDs) GB/T 22084.1-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 1:Nickel-cadmium GB/T 22084.2-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 2:Nickel-metal hydride GB/T 28867-2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Sealed nickel-cadmium prismatic rechargeable single cells GB/T 29303-2012 Switched protective earth portable residual current devices for class Ⅰ and battery powered vehicle applications ISO 7010:2011 IEC 61984 IEC 62233 IEC 62471 IEC/TR 62471-2:2009

IEC 62841-2-5:2014