MT/T 1280-2025 Active Industry standards-Coal

MT/T 1280-2025 General technical requirements for track-type inspection instruments for coal mines

MT/T 1280-2025 General technical requirements for track-type inspection instruments for coal mines

Publish Date: 2025-06-30 Implement Date: 2025-12-30 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: MT/T 1280-2025
Standard Type: Industry standards
Standard Status: Active
is_force_gb: no
CCS Name: Health, safety, and labor protection
ICS Name: Other mining equipment
Publish Date: 2025-06-30
Implement Date: 2025-12-30
Publisher: 国家能源局
Technical Committee: 煤炭行业煤矿专用设备标准化技术委员会
Pages: 24 pages

Scope

本文件规定了煤矿用轨道式巡检仪的产品分类、命名与型号、技术要求、试验方法、检验分类以及标志、包装、运输和贮存。
本文件适用于采用悬挂方式或采用支座、坐卧方式固定在专用轨道上的煤矿用轨道式巡检仪(以下简称“巡检仪”)的制造与检验。

Development Information

Drafting Units:

安标国家矿用产品安全标志中心有限公司、中煤科工集团沈阳研究院有限公司、中信重工开诚智能装备有限公司、山西科达自控股份有限公司、南京北路智控科技股份有限公司、宇祺智能装备有限公司、中煤科工集团常州研究院有限公司、中国矿业大学(北京)、北京天玛智控科技股份有限公司、徐州江煤科技有限公司、湖南安标检验认证有限公司、山东国兴智能科技股份有限公司、合肥小步智能科技有限公司

Drafting Persons:

常琳、马龙、陈永冉、郭长娜、裴文良、付国军、王坤、田斌、吴钰晶、苏珂嘉、张鹏、任伟、李臣华、褚卫忠、汪爱明、李宗伟、刘逸、宋占松、王珊、丁建宽、鲍明松、孙洪秀、张志峰、匡晓东、张大川、邓鑫盛、陈高灿

Word Count: 29 Thousand words Pages: 24 pages

Referenced Standards

GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines) GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines) GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v” GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO) GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s” GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k” GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t” GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE) GB/T 9969-2008 General principles for preparation of instructions for use of industrial products GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test AQ 1043-2007 Mining Product Safety Mark Identification MT 209-1990 The general technical requirements for electrical products used in coal mine communication, detection, and control MT 210-1990 The basic test methods for electrical products used in coal mine communication, detection, and control MT/T 530-1995 Emergency lockout switch in coal mine underground MT 818.1-2009 Coal mine electric cables - Part 1: General provisions for mobile soft cables MT/T 1101-2009 Mine-mounted methane cut-off instrument for truck-mounted mining equipment

Related Standards

Contact Us