YY 9706.279-2023 Active Industry standards-Medicine

YY 9706.279-2023 Medical electrical equipment—Part 2-79:Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment

YY 9706.279-2023 Medical electrical equipment—Part 2-79:Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment

Publish Date: 2023-03-14 Implement Date: 2026-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 123
Out of stock

Basic Information

Standard Code: YY 9706.279-2023
Standard Type: Industry standards
Standard Status: Active
is_force_gb: no
CCS Name: Surgical room equipment
ICS Name: Anesthesia, respiration, and resuscitation equipment
Publish Date: 2023-03-14
Implement Date: 2026-05-01
Pages: 64 pages

Scope

This part of GB 9706 specifies the general requirements for the basic safety and basic performance of ME devices and ME systems.
This part applies to medical electrical equipment and medical electrical systems (hereinafter referred to as ME devices and ME systems).
If a chapter or clause explicitly states that it only applies to ME devices or ME systems, the title and the text of the chapter or clause will indicate this. If this is not the case, the relevant chapter or clause applies to both ME devices and ME systems.
Except for 7.2.13 and 8.4.1, the hazards (sources) caused by the intended physiological effects of ME devices or ME systems within the scope of this part are not specifically required in this part.
This document specifies the basic safety and basic performance of respiratory support devices (see 201.3.205 definition, also known as ME devices) used in combination with accessories for respiratory dysfunction (see 201.3.202 definition).
This document applies to respiratory support devices intended for use in home care environments by inexperienced operators for patients with respiratory dysfunction.
Note 1: The most vulnerable of these patients will not be harmed by the loss of artificial ventilation.
This document also applies to accessories of ME devices that the manufacturer intends to connect to ME devices, the characteristics of which may affect the basic safety and basic performance of ME devices.
Example 1: Respiratory tubing, connectors, water traps, exhalation valves, humidifiers, VBS filters, external power supplies, and distributed alarm systems, etc.
This document does not apply to equipment for patients who rely on artificial ventilation for life support in real time.
Example 2: Patients with mild to moderate chronic obstructive pulmonary disease (COPD).
Note 2: In home care environments, power sources are often unreliable.
Note 3: Such respiratory

Development Information

Word Count: 118 Thousand words Pages: 64 pages

Same series standard

YY 9706.230-2023 Medical electrical equipment—Part 2-30:Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers YY 9706.231-2023 Medical electrical equipment—Part 2-31:Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source YY 9706.246-2023 Medical electrical equipment—Part 2-46:Particular requirements for the basic safety and essential performance of operating tables YY 9706.249-2023 Medical electrical equipment—Part 2-49:Particular requirements for the basic safety and essential performance of multifunction patient monitors YY 9706.256-2023 Medical electrical equipment—Part 2-56:Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement YY 9706.261-2023 Medical electrical equipment—Part 2-61:Particular requirements for the basic safety and essential performance of pulse oximeter equipment YY 9706.277-2023 Medical electrical equipment—Part 2-77:Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment YY 9706.278-2023 Medical electrical equipment—Part 2-78:Particular requirements for basic safety and essential performance of medical robots for rehabilitation,assessment,compensation or alleviation YY 9706.280-2023 Medical electrical equipment—Part 2-80:Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency YY 9706.284-2023 Medical electrical equipment—Part 2-84:Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment

Replace the following standards

Referenced Standards

GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs GB 27701-2011 Mechanical safety of cathode ray tubes GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems YY/T 0316-2016 Medical devices—Application of risk management to medical devices YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 0664-2008 Medical device software—Software life cycle processes YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems ISO 2882 ISO 3864-1:2002 ISO 7000:2004 ISO 7010:2011 ISO 9614-1 ISO 80000-1:2009 IEC 60601-1-6 IEC 60730-1:2010 IEC 60851-3:2009 IEC 60851-5:2008 YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 9706.106-2021 Medical electrical equipment—Part 1-6:General requirements for basic safety and essential performance—Collateral Standard:Usability YY 9706.108-2021 Medical electrical equipment—Part 1-8:General requirements for basic safety and essential performance-Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems YY 9706.111-2021 Medical electrical equipment—Part 1-11:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment GB/T 3767-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane GB/T 4999-2003 Anaesthetic and respiratory equipment—Vocabulary GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance GB 9706.212-2020 Medical electrical equipment—Part 2-12:Particular requirements for basic safety and essential performance of critical care ventilators GB/T 14574-2000 Acoustics—Declaration and verification of noise emission values of machinery and equipment GB/T 19000-2016 Quality management systems—Fundamentals and vocabulary YY/T 0339-2019 Suction catheters for use in the respiratory tract YY/T 0461-2003 Breathing tubes intended for use with aneasthetic apparatus and ventilators YY/T 0671-2021 Medical devices—Sleep apnoea breathing therapy—Masks and application accessories YY/T 0735.1-2009 Anaesthetic and respiratory equipment—Heat and moisture exchangers(HMEs)for humidifying respired gases in humans—Part 1:HMEs for use with minimum tidal volumes of 250 mL YY/T 0735.2-2009 YY/T 0753.1-2009 Breathing system filters for anaesthetic and respiratory use—Part 1:Salt test method to assess filtration performance YY/T 0753.2-2009 Breathing system filters for anaesthetic and respiratory use—Part 2:Non-filtration aspects YY/T 0802-2020 Processing of medical devices—Information to be provided by the medical device manufacturer YY/T 0916.1-2014 Small-bore connectors for liquids and gases in healthcare applications—Part 1:General requirements YY/T 0916.1-2021 Small-bore connectors for liquids and gases in healthcare applications—Part 1:General requirements YY/T 1474-2016 Medical devices—Application of usability engineering to medical devices YY/T 1778.1-2021 Biocompatibility evaluation of breathing gas pathways in healthcare applications—Part 1:Evaluation and testing within a risk management process YY 9706.272-2021 Medical electrical equipment—Part 2-72:Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients YY 9706.274-2022 Medical electrical equipment—Part 2-74:Particular requirements for basic safety and essential performance of respiratory humidifying equipment ISO 5356-1:2015 ISO 7000 ISO 7396-1:2016 ISO 16142-1:2016 ISO 80369-7 EN 15986:2011

Adopt standards

ISO 80601-2-79:2018

Related Standards

Contact Us