GB 3883.10-1991
Replaced
GB/T 3883.206-2025
Active
National standards
GB/T 3883.206-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 206:Particular requirements for hand-held hammers
GB/T 3883.206-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 206:Particular requirements for hand-held hammers
Price:
$ 159
Basic Information
Standard Code:
GB/T 3883.206-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Electric tools
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Pages:
60 pages
Scope
This document applies to handheld hammer-type tools.
The tools covered by this document include electric picks and electric hammers, including electric hammers that can only rotate when the hammering mechanism is disengaged (single drilling mode).
This document does not apply to electric drills and impact electric drills.
Note 101: Electric drills and impact electric drills are specified by GB/T 3883.201.
This document does not apply to tools specifically designed for driving fasteners, such as palm hammers.
Development Information
Same series standard
GB/T 3883.203-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 203:Particular requirements for hand-held grinders,disc-typepolishers and disc-type sanders
GB/T 3883.404-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 404:Particular requirements for pedestrian controlled walk-behind lawnmowers
GB/T 3883.405-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 405:Particular requirements for grass shears
Replace the following standards
Referenced Standards
GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB/T 1406.1-2008 Types and dimensions of lamp caps—Part 1:Screw caps
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements
GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB 2099.2-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB/T 2099.2-2012 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances
GB 2099.3-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirement for adaptors
GB 2099.3-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for adaptors
GB/T 2099.3-2015 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors
GB/T 2099.4-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations
GB/T 2099.5-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations
GB/T 2099.6-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for fused plugs
GB/T 2099.7-2015 Plugs and socket-outlets for household and similar purposes—Part 2-7:Particular requirements for cord extension sets
GB 2099.7-2024 Cord extension socket-outlets for household and similar purposes—Safety technical specification
GB/T 2099.8-2017 Plugs and socket-outlets for household and similar purposes—Part 2-4:Particular requirements for plugs and socket-outlets for SELV
GB/T 2099.9-2017 Plugs and socket-outlets for household and similar purposes—Part 2-9:Particular requirements for socket-outlets for information
GB/T 2099.10-2026 Plugs and socket-outlets for household and similar purposes—Part 10:Particular requirements for plugs and socket-outlets applicable to Hong Kong special administrative region
GB/T 2099.31-2025 Plugs and socket-outlets for household and similar purposes—Part 31:Particular requirements for socket-outlets incorporating USB power supply
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels
GB/T 2893.3-2010 Graphical symbols—Safety colours and safety signs—Part 3:Design principles for graphical symbols for use in safety signs
GB 3667-1997 A.C. motor capacitors
GB/T 3667.1-2005 AC motor capacitors—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation
GB/T 3667.1-2016 AC motor capacitors—Part 1:General—Performance,testing and rating—Safety requirements—Guide for installation and operation
GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors
GB/T 3667.2-2016 AC motor capacitors—Part 2:Motor start capacitors
GB/T 3956-2008 Conductors of insulated cables
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements
GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods
GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB 7247.1-2012 Safety of laser products—Part 1:Equipment classification and requirements
GB/T 8332-2008 Test method for flammability of cellular plastic—Horizonal burning method
GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements
GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 19639.1-2014 General purpose valve-regulated lead-acid batteries—Part 1:Technical conditions
GB 20044-2005 Electrical accessories—Portable residual current devices without integral overcurrent protection for household and similar use(PRCDs)
GB/T 22084.1-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 1:Nickel-cadmium
GB/T 22084.2-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 2:Nickel-metal hydride
GB/T 28867-2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Sealed nickel-cadmium prismatic rechargeable single cells
GB/T 29303-2012 Switched protective earth portable residual current devices for class Ⅰ and battery powered vehicle applications
ISO 7010:2011
IEC 61984
IEC 62233
IEC 62471
IEC/TR 62471-2:2009
EN 206:2013
EN 206:2013/AMD1:2016
Adopt standards
IEC 62841-2-6:2020
Related Standards
GB 3883.12-1991
Replaced
GB 3883.12-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for concrete vibrators (internal vibrators)
GB 3883.3-1991
Replaced
GB 3883.3-1991 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for electric grinders, polishers and disk-type sanders
GB 3883.6-1991
Replaced
GB 3883.6-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for electric drills
GB 13960-1992
Replaced
GB 13960-1992 Safety of transportable motor-operated electric tools—Part 1:General requirements
GB/T 13956-1992
Abolished