GB/T 3883.206-2025 Active National standards

GB/T 3883.206-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 206:Particular requirements for hand-held hammers

GB/T 3883.206-2025 Safety of motor-operated hand-held,transportable and garden tools—Part 206:Particular requirements for hand-held hammers

Publish Date: 2025-10-31 Implement Date: 2026-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 159
Out of stock

Basic Information

Standard Code: GB/T 3883.206-2025
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Electric tools
ICS Name: Electric tools
Publish Date: 2025-10-31
Implement Date: 2026-05-01
Pages: 60 pages

Scope

This document applies to handheld hammer-type tools.
The tools covered by this document include electric picks and electric hammers, including electric hammers that can only rotate when the hammering mechanism is disengaged (single drilling mode).
This document does not apply to electric drills and impact electric drills.
Note 101: Electric drills and impact electric drills are specified by GB/T 3883.201.
This document does not apply to tools specifically designed for driving fasteners, such as palm hammers.

Development Information

Word Count: 94 Thousand words Pages: 60 pages

Same series standard

Replace the following standards

Referenced Standards

GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions GB/T 1406.1-2008 Types and dimensions of lamp caps—Part 1:Screw caps GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements GB 2099.2-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances GB/T 2099.2-2012 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for socket-outlets for appliances GB 2099.3-1997 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirement for adaptors GB 2099.3-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for adaptors GB/T 2099.3-2015 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes—Part 2-5:Particular requirements for adaptors GB/T 2099.4-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets without interlock for fixed installations GB/T 2099.5-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for switched socket-outlets with interlock for fixed installations GB/T 2099.6-2008 Plugs and socket-outlets for household and similar purposes—Part 2:Particular requirements for fused plugs GB/T 2099.7-2015 Plugs and socket-outlets for household and similar purposes—Part 2-7:Particular requirements for cord extension sets GB 2099.7-2024 Cord extension socket-outlets for household and similar purposes—Safety technical specification GB/T 2099.8-2017 Plugs and socket-outlets for household and similar purposes—Part 2-4:Particular requirements for plugs and socket-outlets for SELV GB/T 2099.9-2017 Plugs and socket-outlets for household and similar purposes—Part 2-9:Particular requirements for socket-outlets for information GB/T 2099.10-2026 Plugs and socket-outlets for household and similar purposes—Part 10:Particular requirements for plugs and socket-outlets applicable to Hong Kong special administrative region GB/T 2099.31-2025 Plugs and socket-outlets for household and similar purposes—Part 31:Particular requirements for socket-outlets incorporating USB power supply GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels GB/T 2893.3-2010 Graphical symbols—Safety colours and safety signs—Part 3:Design principles for graphical symbols for use in safety signs GB 3667-1997 A.C. motor capacitors GB/T 3667.1-2005 AC motor capacitors—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation GB/T 3667.1-2016 AC motor capacitors—Part 1:General—Performance,testing and rating—Safety requirements—Guide for installation and operation GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors GB/T 3667.2-2016 AC motor capacitors—Part 2:Motor start capacitors GB/T 3956-2008 Conductors of insulated cables GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements GB/T 4956-2003 Non-magnetic coatings on magnetic substrates—Measurement of coating thickness-Magnetic method GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords) GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method GB 7247.1-2012 Safety of laser products—Part 1:Equipment classification and requirements GB/T 8332-2008 Test method for flammability of cellular plastic—Horizonal burning method GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links GB/T 19639.1-2014 General purpose valve-regulated lead-acid batteries—Part 1:Technical conditions GB 20044-2005 Electrical accessories—Portable residual current devices without integral overcurrent protection for household and similar use(PRCDs) GB/T 22084.1-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 1:Nickel-cadmium GB/T 22084.2-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Portable sealed rechargeable single cells—Part 2:Nickel-metal hydride GB/T 28867-2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Sealed nickel-cadmium prismatic rechargeable single cells GB/T 29303-2012 Switched protective earth portable residual current devices for class Ⅰ and battery powered vehicle applications ISO 7010:2011 IEC 61984 IEC 62233 IEC 62471 IEC/TR 62471-2:2009 EN 206:2013 EN 206:2013/AMD1:2016

Adopt standards

IEC 62841-2-6:2020

Related Standards

Contact Us