GB 3836.13-2013
Replaced
National standards
force_standard
GB 3836.13-2013 Explosive atmospheres—Part 13:Equipment repair,overhaul and reclamation
GB 3836.13-2013 Explosive atmospheres—Part 13:Equipment repair,overhaul and reclamation
Basic Information
Standard Code:
GB 3836.13-2013
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
yes
CCS Name:
Explosion-proof electrical appliances
ICS Name:
Electric equipment for use in explosive environments
Publish Date:
2013-12-17
Implement Date:
2014-11-14
Pages:
48 pages
Scope
This part of GB 3836 specifies the technical requirements, processing methods, and inspections for the repair, overhaul, restoration, and modification of electrical equipment that has obtained explosion-proof certifications for use in explosive environments.
This part does not apply to equipment maintenance, except when repair and maintenance cannot be separated. It does not stipulate requirements for the cable introduction system that needs to be updated when reinstalling equipment.
This part does not apply to encapsulated type "m", oil-immersed type "o", and sand-filled type "q".
This part assumes that excellent process practices are always adopted.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.3-2000 Electrical apparatus for explosive gas atmospheres—Part 3:Increased safety “e”
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB 3836.5-2004 Electrical apparatus for explosive gas atmosphere—Part 5:Pressurized enclosures"p"
GB/T 3836.5-2017 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure"p"
GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure "p"
GB 3836.6-2004 Electrical apparatus for explosive gas atmospheres—Part 6:Oil-immersion"o"
GB/T 3836.6-2017 Explosive atmospheres—Part 6:Equipment protection by liquid immersion“o”
GB 3836.7-2004 Electrical apparatus for explosive gas atmospheres—Part 7:Powder filling"q"
GB/T 3836.7-2017 Explosive atmospheres—Part 7:Equipment protection by powder filling“q”
GB 3836.8-2003 Electrical apparatus for explosive gas atmospheres—Part 8:Type of protection “n”
GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n”
GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n”
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.9-2006 Electrical apparatus for explosive gas atmospheres—Part 9:Encapsulation "m"
GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m”
GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m”
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB/T 3836.11-2008 Explosive atmospheres—Part 11:Equipment protection by flameproof enclosures “d”—Method of test for ascertainment of maximum experimental safe gap
GB/T 3836.11-2017 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data
GB/T 3836.11-2022 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB/T 3836.12-2008 Explosive atmospheres—Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
GB/T 3836.12-2019 Explosive atmospheres—Part 12:Material characteristics for combustible dusts—Test methods
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
GB 3836.13-2013 Explosive atmospheres—Part 13:Equipment repair,overhaul and reclamation
GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification
GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas
GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines)
GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance
GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11379-2008 Metallic coatings—Electroplated coatings of chromium for engineering purposes
GB/T 12332-2008 Metallic coatings—Electroplated coatings of nickel for engineering purposes
GB 12476.1-2013 Electrical apparatus for use in the presence of combustible dust—Part 1:General requirements
GB 12476.7-2010 Electrical apparatus for use in the presence of combustible dust—Part 7:Type of protection "pD"
GB/T 19001-2008 Quality management systems—Requirements
Adopt standards
IEC 60079-19:2010
Related Standards
GB 5590-1985
Replaced
GB 3836.9-1990
Replaced
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.11-1991
Replaced
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB 3836.12-1991
Replaced
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB 3836.13-1997
Replaced
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
MT 703-1997
Replaced