GB/T 4011-1983
Replaced
GB/T 13033.1-1991
Replaced
National standards
GB/T 13033.1-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V—Part 1:General
GB/T 13033.1-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V—Part 1:General
Basic Information
Standard Code:
GB/T 13033.1-1991
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
1991-07-15
Implement Date:
1992-04-01
Publisher:
The National Technical Supervision Bureau
Technical Committee:
Shanghai Cable Research Institute of the Ministry of Mechanical and Electronic Industry
Pages:
4 pages
Development Information
Drafting Persons:
Zhou Yimei and Xing Benren
Same series standard
GB/T 13033.2-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V—Part 2:Mineral insulated cables with copper conductors and copper sheath
GB/T 13033.3-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 3:Terminations for mineral insulated cables with copper conductors and copper sheath
Superseded by the following standards
Referenced Standards
GB/T 3048.8-2007 Test methods for electrical properties of electric cables and wires—Part 8:AC voltage test
GB/T 3048.9-2007 Test methods for electrical properties of electric cables and wires—Part 9:Spark test of insulated cores
GB/T 3048.4-2025 Test methods for electrical properties of electric cables and wires—Part 4:Test of DC resistance of conductors
GB/T 3048.8-2025 Test methods for electrical properties of electric cables and wires— Part 8:AC voltage test
GB/T 3048.12-2025 Test methods for electrical properties of electric cables and wires—Part 12:Partial discharge test
GB/T 3048.13-2025 Test methods for electrical properties of electric cables and wires—Part 13:Impulse voltage test
GB/T 3048.11-2025 Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.3-2000 Electrical apparatus for explosive gas atmospheres—Part 3:Increased safety “e”
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB 3836.5-2004 Electrical apparatus for explosive gas atmosphere—Part 5:Pressurized enclosures"p"
GB/T 3836.5-2017 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure"p"
GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure "p"
GB 3836.6-2004 Electrical apparatus for explosive gas atmospheres—Part 6:Oil-immersion"o"
GB/T 3836.6-2017 Explosive atmospheres—Part 6:Equipment protection by liquid immersion“o”
GB 3836.7-2004 Electrical apparatus for explosive gas atmospheres—Part 7:Powder filling"q"
GB/T 3836.7-2017 Explosive atmospheres—Part 7:Equipment protection by powder filling“q”
GB 3836.8-2003 Electrical apparatus for explosive gas atmospheres—Part 8:Type of protection “n”
GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n”
GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n”
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.9-2006 Electrical apparatus for explosive gas atmospheres—Part 9:Encapsulation "m"
GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m”
GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m”
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB/T 3836.11-2008 Explosive atmospheres—Part 11:Equipment protection by flameproof enclosures “d”—Method of test for ascertainment of maximum experimental safe gap
GB/T 3836.11-2017 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data
GB/T 3836.11-2022 Explosive atmospheres—Part 11:Material characteristics for gas and vapour classification—Test methods and data
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB/T 3836.12-2008 Explosive atmospheres—Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
GB/T 3836.12-2019 Explosive atmospheres—Part 12:Material characteristics for combustible dusts—Test methods
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
GB 3836.13-2013 Explosive atmospheres—Part 13:Equipment repair,overhaul and reclamation
GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification
GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres—Part 14:Classification of hazardous areas
GB 3836.14-2014 Explosive atmospheres—Part 14:Classification of areas—Explosive gas atmosphere
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB 3836.16-2006 Electrical apparatus for explosive gas atmospheres—Part 16:Inspection and maintenance of electrical installation(other than mines)
GB/T 3836.16-2017 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB/T 3836.16-2022 Explosive atmospheres—Part 16:Electrical installations inspection and maintenance
GB 3836.16-2024 Explosive atmospheres—Part 16:Specification of electrical installations inspection and maintenance
GB 3836.17-2007 Electrical apparatus for explosive gas atmosphere—Part 17:Construction and use of rooms or buildings protected by pressurization
GB/T 3836.17-2019 Explosive atmospheres—Part 17:Equipment protection by pressurized room “p” and artifically ventilated room “v”
GB 3836.18-2010 Explosive atmospheres—Part 18:Intrinsically safe system
GB/T 3836.18-2017 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB/T 3836.18-2024 Explosive atmospheres—Part 18:Intrinsically safe electrical systems
GB 3836.19-2010 Explosive atmospheres—Part 19:Fieldbus intrinsically safe concept(FISCO)
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 3836.21-2017 Explosive atmospheres—Part 21:Application of quality systems for equipment manufacture
GB/T 3836.21-2022 Explosive atmospheres—Part 21:Application of quality management systemsfor Ex Product manufacture
GB/T 3836.22-2017 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.22-2023 Explosive atmospheres—Part 22:Protection of equipment and transmission system using optical radiation
GB/T 3836.23-2017 Explosive atmospheres—Part 23:Group Ⅰ,category EPL Maequipment intended to remain functionalin atmospheres endangered by firedamp and/or coal dust
GB/T 3836.24-2017 Explosive atmospheres—Part 24:Equipment protection by special protection“s”
GB/T 3836.25-2019 Explosive atmospheres—Part 25:Requirements for process sealing between flammable process fluids and electrical systems
GB/T 3836.26-2019 Explosive atmospheres—Part 26:Electrostatic hazards—Guidance
GB/T 3836.27-2019 Explosive atmospheres—Part 27:Electrostatic hazards—Test
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
GB/T 3836.36-2022 Explosive atmospheres—Part 36:Electrical safety devices for the control of potential ignition sources from Ex Equipment
GB/Z 3836.37-2025 Explosive atmospheres—Part 37:Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
GB/T 3956-1997 Conductors of insulated cables
GB/T 3956-2008 Conductors of insulated cables
GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys
GB/T 8815-2002 Plasticized polyvinyl chloride (PVC) compounds for wire and cable
GB/T 8815-2008 Plasticized polyvinyl chloride(PVC)compounds for wire and cable
GB/T 12666.1-1990 Test method on electric wires or cables under fire conditions Part 1:General
GB/T 12666.1-2008 Test method on a single wire or cable under fire conditions—Part 1:Vertical specimen flame test
GB/T 12666.2-2008 Test method on a single wire or cable under fire conditions—Part 2:Horizontal specimen flame test
GB/T 12666.3-1990 Test method on electric wires or cables under fire conditions Part 3:Test on a single horizontal insulated wire or cable
GB/T 12666.3-2008 Test method on a single wire or cable under fire conditions—Part 3:Slanting specimen flame test
GB/T 12666.4-1990 Test method on electric wires or cables under fire conditions Part 4:Test on a single slanting insulated wire or cable
GB/T 13033.2-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V—Part 2:Mineral insulated cables with copper conductors and copper sheath
GB/T 13033.2-2007 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V—Part 2:Terminations
GB/T 13033.3-1991 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 3:Terminations for mineral insulated cables with copper conductors and copper sheath
Adopt standards
IEC 702-1(1988)
IEC
Related Standards
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced